[sane-devel] hp scanjet 5590 USB-in-USB command verification failed

Краснов Андрей rednikov at ngs.ru
Thu Feb 24 12:16:00 UTC 2011


Hello
I beg your pardon for my English, because I use an automatic translator.

Available HP scanjet 5590
FreeBSD 8.2-RELEASE amd64
sane-backends-1.0.21_2 installed from fresh ports
and follow the instructions 
http://www.freebsd.org/doc/ru/books/handbook/scanners.html
I get the following result:

sane-find-scanner -q
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1705 [hp 
scanjet scanner], chip=HP4500C/4570C/5500C/5550C/5590/7650) at 
libusb:/dev/usb:/dev/ugen7.2

The first launch:
scanimage -L
device `hp5590:libusb:/dev/usb:/dev/ugen7.2' is a HP 5590 Workgroup scanner

Subsequent launches:
scanimage -L
[hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 
failed: expected 0x0012, got 0x00e8

And finally launched:

SANE_DEBUG_HP5590=50 scanimage -L
sanei_debug] Setting debug level of hp5590 to 50.
[hp5590] SANE backed for HP ScanJet 4500C/4570C/5500C/5550C/5590/7650 1.0.5
[hp5590] (c) Ilia Sotnikov <hostcc at gmail.com>
[hp5590] attach_usb_device: Opening USB device
[hp5590] attach_usb_device: USB device opened
[hp5590] hp5590_init_scanner
[hp5590] hp5590_cmd: USB-in-USB: command : 0012
[hp5590] hp5590_control_msg: USB-in-USB: core data: no
[hp5590] hp5590_control_msg: USB-in-USB: sending control msg
[hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for 
control message
[hp5590] hp5590_get_ack
[hp5590] hp5590_get_ack: USB-in-USB: accepted
[hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was 
acknowledged
[hp5590] hp5590_get_ack
[hp5590] hp5590_get_ack: USB-in-USB: accepted
[hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested
[hp5590] hp5590_control_msg: USB-in-USB: core data: no
[hp5590] hp5590_control_msg: USB-in-USB: sending control msg
[hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for 
control message
[hp5590] hp5590_get_ack
[hp5590] hp5590_get_ack: USB-in-USB: accepted
[hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was 
acknowledged
[hp5590] hp5590_get_ack
[hp5590] hp5590_get_ack: USB-in-USB: accepted
[hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 12e8, 
last command: 00e8, core status: 0012
[hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification 
failed: expected 0x0012, got 0x00e8
[hp5590] sane_hp5590_get_devices, local only: 0
[hp5590] Found 0 devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[hp5590] sane_hp5590_exit

Probably because of these problems the program finds no Scanlite 
scanning devices and, accordingly, I can not use the scanner. Please 
help me to run the HP scanjet 5590 fine

Thank you very much

-- 
С уважением,

Краснов Андрей Викторович
Дом. | +7 383 267 13 02
моб. | +7 960 784 00 60
E-mail | rednikov at ngs.ru
Web | sysblog.krasnov.me




More information about the sane-devel mailing list