[sane-devel] trying Canon DR-5060-F

m. allan noah kitno455 at gmail.com
Mon Jan 3 16:31:16 UTC 2011


Excellent. set_window is now accepted by the scanner, but it does not
like our ssm_do() call. So, edit canon_dr.c around line 3273, and
comment out the call to ssm_do(). Then try again with test2 :)

allan

On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste)
<liste at alixen.fr> wrote:
> Hi,
>
> change, recompile and test done.
>
> The test1pnm file is empty.
>
> The compressed test1.log  is attached to this message.
>
> Christophe.
>
> Le 03/01/2011 16:50, m. allan noah a écrit :
>>
>> ok- can you make some changes, recompile, and test?
>>
>> canon_dr.c in function set_window, around line 3615 comment out these
>> lines:
>>
>> set_WD_brightness (desc1, s->brightness+128);
>> set_WD_threshold (desc1, s->threshold);
>> set_WD_contrast (desc1, s->contrast+128);
>>
>> Then compile, copy the library, and scan again, using this command:
>>
>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray
>>>
>>> test1pnm 2>test1.log
>>
>> Hopefully test1.pnm will contain an image. If not, compress the log
>> and send it to me.
>>
>> allan
>>
>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan noah<kitno455 at gmail.com>  wrote:
>>>
>>> Yes- I can see some set window data in it, though I am not sure it is
>>> complete. This sniffer program seems to miss some of the data. I will
>>> look some more today.
>>>
>>> allan
>>>
>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste)
>>> <liste at alixen.fr>  wrote:
>>>>
>>>> Hi,
>>>>
>>>> have you checked the log ? Is it helpful ?
>>>>
>>>> Christophe.
>>>>
>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a écrit :
>>>>>
>>>>> Thank you.
>>>>>
>>>>> Note that I'll be away until next monday.
>>>>>
>>>>> Christophe.
>>>>>
>>>>> Le 29/12/2010 17:00, m. allan noah a écrit :
>>>>>>
>>>>>> Thanks. I'll look at it tonight.
>>>>>>
>>>>>> allan
>>>>>>
>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau (liste)
>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>
>>>>>>> the trace.wsl file taken from the snifer is attached to this message.
>>>>>>>
>>>>>>> Christophe.
>>>>>>>
>>>>>>>
>>>>>>> Le 29/12/2010 15:38, m. allan noah a écrit :
>>>>>>>>
>>>>>>>> the sniffer utility:
>>>>>>>>
>>>>>>>>
>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip
>>>>>>>>
>>>>>>>>
>>>>>>>> We need to use that to capture traffic of a low-resolution black and
>>>>>>>> white
>>>>>>>> scan.
>>>>>>>>
>>>>>>>> I cannot give more specific instructions, because I rarely use this
>>>>>>>> program.
>>>>>>>>
>>>>>>>> allan
>>>>>>>>
>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau (liste)
>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>
>>>>>>>>> I will replug the scsi card into the orignal windows machine. Do
>>>>>>>>> you have
>>>>>>>>> instruction for the log capture on windows ?
>>>>>>>>>
>>>>>>>>> Christophe.
>>>>>>>>>
>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a écrit :
>>>>>>>>>>
>>>>>>>>>> hmm- it is mad about something we ask it to do in the set window
>>>>>>>>>> command. I don't have a protocol manual for this machine, so we
>>>>>>>>>> have
>>>>>>>>>> to guess what the problem is. Or, we have to try and capture a log
>>>>>>>>>> from Windows driver. Can you use this machine on windows?
>>>>>>>>>>
>>>>>>>>>> allan
>>>>>>>>>>
>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau (liste)
>>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>>
>>>>>>>>>>> the new dr.log is attached to this message.
>>>>>>>>>>>
>>>>>>>>>>> Christophe.
>>>>>>>>>>>
>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>>>>>>>>>>
>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try:
>>>>>>>>>>>>
>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>>>>>>>>> 2>dr.log>dr.pnm
>>>>>>>>>>>>
>>>>>>>>>>>> allan
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan
>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> "scanimage: output is not a file, exiting"
>>>>>>>>>>>>>
>>>>>>>>>>>>> allan
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau (liste)
>>>>>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2
>>>>>>>>>>>>>> API
>>>>>>>>>>>>>> library for scanners
>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2
>>>>>>>>>>>>>> API
>>>>>>>>>>>>>> library for scanners -- utilities
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The sane-find-scanner commands returns :
>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect your scanner.
>>>>>>>>>>>>>> If the
>>>>>>>>>>>>>> # result is different from what you expected, first make sure
>>>>>>>>>>>>>> your
>>>>>>>>>>>>>> # scanner is powered up and properly connected to your
>>>>>>>>>>>>>> computer.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2
>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may not be
>>>>>>>>>>>>>> supported by
>>>>>>>>>>>>>> SANE.
>>>>>>>>>>>>>> Try
>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> # No USB scanners found. If you expected something different,
>>>>>>>>>>>>>> make
>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>> that
>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB host controller
>>>>>>>>>>>>>> and
>>>>>>>>>>>>>> have
>>>>>>>>>>>>>> setup
>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for details.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> # Not checking for parallel port scanners.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> # Most Scanners connected to the parallel port or other
>>>>>>>>>>>>>> proprietary
>>>>>>>>>>>>>> ports
>>>>>>>>>>>>>> # can't be detected by this program.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> when I tried the command "scanimage -L" the scanner wasn't
>>>>>>>>>>>>>> recognized
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> thanks to this message :
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html
>>>>>>>>>>>>>> ,
>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at line 1203.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>>>>>>>>>>> s->can_write_panel = 0;
>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Then I replace the compiled versions of libsane-canon_dr.la
>>>>>>>>>>>>>> and
>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Now, the "scanimage -L" command returns :
>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F scanner
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Great, but the scanner doesn't work :
>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr to 30.
>>>>>>>>>>>>>> [canon_dr] sane_init: start
>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, from
>>>>>>>>>>>>>> sane-backends
>>>>>>>>>>>>>> 1.0.21
>>>>>>>>>>>>>> [canon_dr] sane_init: finish
>>>>>>>>>>>>>> [canon_dr] sane_open: start
>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently attached,
>>>>>>>>>>>>>> attaching
>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start
>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file canon_dr.conf
>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
>>>>>>>>>>>>>> [canon_dr] attach_one: start
>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer size
>>>>>>>>>>>>>> (2097152/524288)
>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>> [canon_dr] init_inquire: start
>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00
>>>>>>>>>>>>>> ....0.
>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes
>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f 4e 20 20
>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>> ........CANON
>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 20 20 20
>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 20 20 20
>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>> 011020010607
>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes
>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner DR-5060F version
>>>>>>>>>>>>>> 0110
>>>>>>>>>>>>>> at
>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>> [canon_dr] init_inquire: finish
>>>>>>>>>>>>>> [canon_dr] init_vpd: start
>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00
>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes
>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c 01 2c 00
>>>>>>>>>>>>>> c8
>>>>>>>>>>>>>> ....#.,.,..,.,..
>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee 0e 00
>>>>>>>>>>>>>> .d............
>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes
>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23
>>>>>>>>>>>>>> [canon_dr] standard options
>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi
>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi
>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi
>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi
>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi
>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi
>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi
>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi
>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1
>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1
>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1
>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0
>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0
>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>>>>>>>>>>> [canon_dr] AWD: 0
>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0
>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0
>>>>>>>>>>>>>> [canon_dr] High quality: 0
>>>>>>>>>>>>>> [canon_dr] grayscale: 1
>>>>>>>>>>>>>> [canon_dr] halftone: 1
>>>>>>>>>>>>>> [canon_dr] monochrome: 1
>>>>>>>>>>>>>> [canon_dr] overflow: 0
>>>>>>>>>>>>>> [canon_dr] init_vpd: finish
>>>>>>>>>>>>>> [canon_dr] init_model: start
>>>>>>>>>>>>>> [canon_dr] init_model: finish
>>>>>>>>>>>>>> [canon_dr] init_panel: start
>>>>>>>>>>>>>> [canon_dr] read_panel: start
>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0
>>>>>>>>>>>>>> [canon_dr] send_panel: start
>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>>>>>>>>>>> [canon_dr] init_panel: finish
>>>>>>>>>>>>>> [canon_dr] init_user: start
>>>>>>>>>>>>>> [canon_dr] init_user: finish
>>>>>>>>>>>>>> [canon_dr] init_options: start
>>>>>>>>>>>>>> [canon_dr] init_options: finish
>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>> [canon_dr] attach_one: finish
>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner /dev/sg2
>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s)
>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish
>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested
>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>> [canon_dr] sane_open: finish
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-x' (8)
>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-y' (9)
>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-x' (8)
>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-y' (9)
>>>>>>>>>>>>>> scanimage: output is not a file, exiting
>>>>>>>>>>>>>> [canon_dr] sane_close: start
>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>> [canon_dr] image_buffers: start
>>>>>>>>>>>>>> [canon_dr] image_buffers: finish
>>>>>>>>>>>>>> [canon_dr] offset_buffers: start
>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish
>>>>>>>>>>>>>> [canon_dr] gain_buffers: start
>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish
>>>>>>>>>>>>>> [canon_dr] sane_close: finish
>>>>>>>>>>>>>> [canon_dr] sane_exit: start
>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>> [canon_dr] sane_exit: finish
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Any idea ?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe
>>>>>>>>>>>>>> your_password"
>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>> Alixen
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Christophe Largeau
>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Christophe Largeau
>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>> --
>>>> Christophe Largeau
>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>
>>>
>>>
>>>
>>> --
>>> "The truth is an offense, but not a sin"
>>>
>>
>>
>>
>
>
> --
> Christophe Largeau
> Alixen 20 rue Jean Rostand 91 400 Orsay
> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>



-- 
"The truth is an offense, but not a sin"



More information about the sane-devel mailing list