[sane-devel] trying Canon DR-5060-F

Christophe Largeau (liste) liste at alixen.fr
Tue Jan 4 09:31:58 UTC 2011 

Hi,

I've done another test today (the test3pnm file was deleted). You can 
download the file test4.tar.gz (test4.pnm and tes4t.log) here 
http://dl.free.fr/b25kqUna1

You'll have to follow the link "Télécharger ce fichier"

Christophe.

Le 03/01/2011 18:54, m. allan noah a écrit :
> jpg destroys too much image information. Any chance to can compress
> the pnm instead, and send that to me directly?
>
> allan
>
> On Mon, Jan 3, 2011 at 12:11 PM, Christophe Largeau (liste)
> <liste at alixen.fr>  wrote:
>> OK,
>>
>> my A4 page (basically 0.5 millimeter squares) has been processed
>>
>> you can view the result here
>> http://i37.servimg.com/u/f37/15/57/48/39/test3p10.jpg : not really the
>> expected result ;)
>>
>> You'll find the compressed test3.log attached to this message.
>>
>> Do you need other informations for ssm_df() and ssm_do() debugging ?
>>
>> Christophe.
>>
>> Le 03/01/2011 17:45, m. allan noah a écrit :
>>>
>>> Ah- same thing, this time also comment out ssm_df(). It would be nice
>>> to get those two commands working for your machine (if they are
>>> supported by the hardware), but they are not required for proper
>>> functioning.
>>>
>>> allan
>>>
>>> On Mon, Jan 3, 2011 at 11:40 AM, Christophe Largeau (liste)
>>> <liste at alixen.fr>    wrote:
>>>>
>>>> Here is the new test2.log ;)
>>>>
>>>> Christophe.
>>>>
>>>> Le 03/01/2011 17:31, m. allan noah a écrit :
>>>>>
>>>>> Excellent. set_window is now accepted by the scanner, but it does not
>>>>> like our ssm_do() call. So, edit canon_dr.c around line 3273, and
>>>>> comment out the call to ssm_do(). Then try again with test2 :)
>>>>>
>>>>> allan
>>>>>
>>>>> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste)
>>>>> <liste at alixen.fr>      wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> change, recompile and test done.
>>>>>>
>>>>>> The test1pnm file is empty.
>>>>>>
>>>>>> The compressed test1.log  is attached to this message.
>>>>>>
>>>>>> Christophe.
>>>>>>
>>>>>> Le 03/01/2011 16:50, m. allan noah a écrit :
>>>>>>>
>>>>>>> ok- can you make some changes, recompile, and test?
>>>>>>>
>>>>>>> canon_dr.c in function set_window, around line 3615 comment out these
>>>>>>> lines:
>>>>>>>
>>>>>>> set_WD_brightness (desc1, s->brightness+128);
>>>>>>> set_WD_threshold (desc1, s->threshold);
>>>>>>> set_WD_contrast (desc1, s->contrast+128);
>>>>>>>
>>>>>>> Then compile, copy the library, and scan again, using this command:
>>>>>>>
>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray
>>>>>>>>
>>>>>>>> test1pnm 2>test1.log
>>>>>>>
>>>>>>> Hopefully test1.pnm will contain an image. If not, compress the log
>>>>>>> and send it to me.
>>>>>>>
>>>>>>> allan
>>>>>>>
>>>>>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan noah<kitno455 at gmail.com>
>>>>>>>   wrote:
>>>>>>>>
>>>>>>>> Yes- I can see some set window data in it, though I am not sure it is
>>>>>>>> complete. This sniffer program seems to miss some of the data. I will
>>>>>>>> look some more today.
>>>>>>>>
>>>>>>>> allan
>>>>>>>>
>>>>>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste)
>>>>>>>> <liste at alixen.fr>        wrote:
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> have you checked the log ? Is it helpful ?
>>>>>>>>>
>>>>>>>>> Christophe.
>>>>>>>>>
>>>>>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a écrit :
>>>>>>>>>>
>>>>>>>>>> Thank you.
>>>>>>>>>>
>>>>>>>>>> Note that I'll be away until next monday.
>>>>>>>>>>
>>>>>>>>>> Christophe.
>>>>>>>>>>
>>>>>>>>>> Le 29/12/2010 17:00, m. allan noah a écrit :
>>>>>>>>>>>
>>>>>>>>>>> Thanks. I'll look at it tonight.
>>>>>>>>>>>
>>>>>>>>>>> allan
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau (liste)
>>>>>>>>>>> <liste at alixen.fr>        wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> the trace.wsl file taken from the snifer is attached to this
>>>>>>>>>>>> message.
>>>>>>>>>>>>
>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Le 29/12/2010 15:38, m. allan noah a écrit :
>>>>>>>>>>>>>
>>>>>>>>>>>>> the sniffer utility:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> We need to use that to capture traffic of a low-resolution black
>>>>>>>>>>>>> and
>>>>>>>>>>>>> white
>>>>>>>>>>>>> scan.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I cannot give more specific instructions, because I rarely use
>>>>>>>>>>>>> this
>>>>>>>>>>>>> program.
>>>>>>>>>>>>>
>>>>>>>>>>>>> allan
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau (liste)
>>>>>>>>>>>>> <liste at alixen.fr>        wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I will replug the scsi card into the orignal windows machine.
>>>>>>>>>>>>>> Do
>>>>>>>>>>>>>> you have
>>>>>>>>>>>>>> instruction for the log capture on windows ?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a écrit :
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> hmm- it is mad about something we ask it to do in the set
>>>>>>>>>>>>>>> window
>>>>>>>>>>>>>>> command. I don't have a protocol manual for this machine, so
>>>>>>>>>>>>>>> we
>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>> to guess what the problem is. Or, we have to try and capture a
>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>> from Windows driver. Can you use this machine on windows?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>>> <liste at alixen.fr>        wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> the new dr.log is attached to this message.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>> 2>dr.log>dr.pnm
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan
>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> "scanimage: output is not a file, exiting"
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>>>>>> <liste at alixen.fr>        wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>> library for scanners
>>>>>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>> library for scanners -- utilities
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> The sane-find-scanner commands returns :
>>>>>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect your
>>>>>>>>>>>>>>>>>>> scanner.
>>>>>>>>>>>>>>>>>>> If the
>>>>>>>>>>>>>>>>>>> # result is different from what you expected, first make
>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>> # scanner is powered up and properly connected to your
>>>>>>>>>>>>>>>>>>> computer.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2
>>>>>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may not be
>>>>>>>>>>>>>>>>>>> supported by
>>>>>>>>>>>>>>>>>>> SANE.
>>>>>>>>>>>>>>>>>>> Try
>>>>>>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> # No USB scanners found. If you expected something
>>>>>>>>>>>>>>>>>>> different,
>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB host
>>>>>>>>>>>>>>>>>>> controller
>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>> setup
>>>>>>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for details.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> # Not checking for parallel port scanners.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> # Most Scanners connected to the parallel port or other
>>>>>>>>>>>>>>>>>>> proprietary
>>>>>>>>>>>>>>>>>>> ports
>>>>>>>>>>>>>>>>>>> # can't be detected by this program.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the scanner wasn't
>>>>>>>>>>>>>>>>>>> recognized
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> thanks to this message :
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html
>>>>>>>>>>>>>>>>>>> ,
>>>>>>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at line 1203.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>>>>>>>>>>>>>>>> s->can_write_panel = 0;
>>>>>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Then I replace the compiled versions of
>>>>>>>>>>>>>>>>>>> libsane-canon_dr.la
>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns :
>>>>>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F scanner
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Great, but the scanner doesn't work :
>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr to 30.
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: start
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, from
>>>>>>>>>>>>>>>>>>> sane-backends
>>>>>>>>>>>>>>>>>>> 1.0.21
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: start
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently attached,
>>>>>>>>>>>>>>>>>>> attaching
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file
>>>>>>>>>>>>>>>>>>> canon_dr.conf
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: start
>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer size
>>>>>>>>>>>>>>>>>>> (2097152/524288)
>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: start
>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00
>>>>>>>>>>>>>>>>>>> ....0.
>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes
>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f 4e 20
>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>> ........CANON
>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 20 20
>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 20 20
>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>> 011020010607
>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes
>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner DR-5060F
>>>>>>>>>>>>>>>>>>> version
>>>>>>>>>>>>>>>>>>> 0110
>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: start
>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00
>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes
>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c 01 2c
>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>> c8
>>>>>>>>>>>>>>>>>>> ....#.,.,..,.,..
>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee 0e 00
>>>>>>>>>>>>>>>>>>> .d............
>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes
>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23
>>>>>>>>>>>>>>>>>>> [canon_dr] standard options
>>>>>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi
>>>>>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi
>>>>>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi
>>>>>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi
>>>>>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi
>>>>>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi
>>>>>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi
>>>>>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi
>>>>>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1
>>>>>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1
>>>>>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1
>>>>>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>>>>>>>>>>>>>>>> [canon_dr] AWD: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] High quality: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] grayscale: 1
>>>>>>>>>>>>>>>>>>> [canon_dr] halftone: 1
>>>>>>>>>>>>>>>>>>> [canon_dr] monochrome: 1
>>>>>>>>>>>>>>>>>>> [canon_dr] overflow: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: start
>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: start
>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: start
>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0
>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: start
>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: start
>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: start
>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner /dev/sg2
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s)
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-x' (8)
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-y' (9)
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-x' (8)
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-y' (9)
>>>>>>>>>>>>>>>>>>> scanimage: output is not a file, exiting
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: start
>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: start
>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start
>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start
>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: start
>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Any idea ?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>> sane-devel mailing list:
>>>>>>>>>>>>>>>>>>> sane-devel at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe
>>>>>>>>>>>>>>>>>>> your_password"
>>>>>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Christophe Largeau
>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Christophe Largeau
>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Christophe Largeau
>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>
>>>
>>>
>>>
>>
>>
>> --
>> Christophe Largeau
>> Alixen 20 rue Jean Rostand 91 400 Orsay
>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>
>
>
>


-- 
Christophe Largeau
Alixen 20 rue Jean Rostand 91 400 Orsay
Tel : 01 60 19 72 31, Fax : 01 69 41 78 54

More information about the sane-devel mailing list