[sane-devel] Epson Stylus SX100 not detected

[Jan Murawski]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Am 05.01.2011 01:06, schrieb m. allan noah:
> as root run the following, all on one line:
> 
> SANE_DEBUG_SANEI_USB=15 sane-find-scanner
> 
> hopefully the error messages will give some hint.
> 

~$ SANE_DEBUG_SANEI_USB=15 sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make
sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

[sanei_debug] Setting debug level of sanei_usb to 15.
[sanei_usb] sanei_usb_init: marking existing devices
[sanei_usb] sanei_usb_init: Looking for kernel scanner devices
[sanei_usb] sanei_usb_init: SANE is built without support for libusb
[sanei_usb] sanei_usb_init: found 0 devices
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner0'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner0' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner1'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner1' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner2'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner2' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner3'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner3' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner4'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner4' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner5'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner5' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner5'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner5' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner7'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner7' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner8'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner8' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner9'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner9' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner10'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner10' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner11'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner11' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner12'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner12' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner13'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner13' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner14'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner14' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usb/scanner15'
[sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner15' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner0'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner0' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner1'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner1' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner2'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner2' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner3'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner3' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner4'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner4' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner5'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner5' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner6'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner6' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner7'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner7' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner8'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner8' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner9'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner9' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner10'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner10' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner11'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner11' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner12'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner12' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner13'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner13' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner14'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner14' in list
[sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner15'
[sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner15' in list
  # No USB scanners found. If you expected something different, make
sure that
  # you have loaded a kernel driver for your USB host controller and
have setup
  # the USB system correctly. See man sane-usb for details.
  # SANE has been built without libusb support. This may be a reason
  # for not detecting USB scanners. Read README for more details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.



Does it help? :)

Jan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iQEcBAEBAgAGBQJNI7qZAAoJEH5ihYAc9I7cR2IH/2H+ITVHVA644iQcKdsapEMp
guLh/nNJHrZVfxllWXE/M87XeUKJkOpOUhvlvpw1ZqAIsGC8pqrrlEyWOvvs23tl
I/QPFVCxDgP2pMGQ0fdNQ6U0Ulua6/zjgI0Xpuy4+lzRiQpxddZFHmGVr3VvGkQY
CdOi2P7C/DnWueHvHtIZZdLjS/NtqlV5HG/YRfcMbfujFRS7rHBWQ6QdbjhjQ/ZL
Cqe8NWJn+p+SLcu0QD8g+EFm1mRj7OSFp5onWnwzlJ0aAFnMfZTCKGJ3Ar4K6ytS
yrkMxk7gMwpB42Of03SY9MwTa1VGVaghsv9ajye4OuA0FAZH0rYDTgT+tLRBVdQ=
=cVve
-----END PGP SIGNATURE-----