[sane-devel] trying Canon DR-5060-F

Wed Jan 5 10:50:17 UTC 2011

just done test7 (Lineart mode). The result is a black image ( 
http://dl.free.fr/bDipeF5mF
  )

Christophe.

Le 05/01/2011 09:23, Christophe Largeau (liste) a écrit :
> Great, it's working fine (see the test6.tar.gz at
> http://dl.free.fr/bGEgn9yFu )
>
> I'll make series of tests at other resolutions.
>
> Thanx.
>
> Le 04/01/2011 17:53, m. allan noah a écrit :
>> ok- let us try again, slightly updated file.
>>
>> allan
>>
>> On Tue, Jan 4, 2011 at 11:26 AM, Christophe Largeau (liste)
>> <liste at alixen.fr> wrote:
>>> Hi,
>>>
>>> thank you for the new version.
>>>
>>> The scan is not exactly what it should be (see the file
>>> test5.tar.gz). The
>>> scanned image is not at the right position. Probably a shift problem.
>>>
>>> Note that for all the tests I've done it was a A4 paper and the Canon
>>> DR-5060-F is a A3 scanner.
>>>
>>> the file test5.tar.gz can be downloaded here :
>>> http://dl.free.fr/baKWwnrcy
>>>
>>> Christophe.
>>>
>>> Le 04/01/2011 16:23, m. allan noah a écrit :
>>>>
>>>> here is a new version of two files. use these to replace your existing
>>>> copies, and recompile. This should contain all of your current fixes,
>>>> and it should (hopefully) produce proper grayscale scans.
>>>>
>>>> If you can test this also in lineart mode, it might need the same
>>>> width fix as grayscale...
>>>>
>>>> allan
>>>>
>>>> On Tue, Jan 4, 2011 at 4:33 AM, Christophe Largeau (liste)
>>>> <liste at alixen.fr> wrote:
>>>>>
>>>>> Thank you for the information, waiting for your fix.
>>>>>
>>>>> Christophe.
>>>>>
>>>>> Le 03/01/2011 20:03, m. allan noah a écrit :
>>>>>>
>>>>>> It appears that the corrupt image is because the scanner sends us
>>>>>> 1728
>>>>>> pixels per line, but we asked for only 1700. Likely this means that
>>>>>> the scanner is limited to image widths which are a multiple of 32
>>>>>> pixels. I will see if I can come up with a fix.
>>>>>>
>>>>>> allan
>>>>>>
>>>>>> On Mon, Jan 3, 2011 at 12:54 PM, m. allan noah<kitno455 at gmail.com>
>>>>>> wrote:
>>>>>>>
>>>>>>> jpg destroys too much image information. Any chance to can compress
>>>>>>> the pnm instead, and send that to me directly?
>>>>>>>
>>>>>>> allan
>>>>>>>
>>>>>>> On Mon, Jan 3, 2011 at 12:11 PM, Christophe Largeau (liste)
>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>
>>>>>>>> OK,
>>>>>>>>
>>>>>>>> my A4 page (basically 0.5 millimeter squares) has been processed
>>>>>>>>
>>>>>>>> you can view the result here
>>>>>>>> http://i37.servimg.com/u/f37/15/57/48/39/test3p10.jpg : not
>>>>>>>> really the
>>>>>>>> expected result ;)
>>>>>>>>
>>>>>>>> You'll find the compressed test3.log attached to this message.
>>>>>>>>
>>>>>>>> Do you need other informations for ssm_df() and ssm_do()
>>>>>>>> debugging ?
>>>>>>>>
>>>>>>>> Christophe.
>>>>>>>>
>>>>>>>> Le 03/01/2011 17:45, m. allan noah a écrit :
>>>>>>>>>
>>>>>>>>> Ah- same thing, this time also comment out ssm_df(). It would
>>>>>>>>> be nice
>>>>>>>>> to get those two commands working for your machine (if they are
>>>>>>>>> supported by the hardware), but they are not required for proper
>>>>>>>>> functioning.
>>>>>>>>>
>>>>>>>>> allan
>>>>>>>>>
>>>>>>>>> On Mon, Jan 3, 2011 at 11:40 AM, Christophe Largeau (liste)
>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>
>>>>>>>>>> Here is the new test2.log ;)
>>>>>>>>>>
>>>>>>>>>> Christophe.
>>>>>>>>>>
>>>>>>>>>> Le 03/01/2011 17:31, m. allan noah a écrit :
>>>>>>>>>>>
>>>>>>>>>>> Excellent. set_window is now accepted by the scanner, but it
>>>>>>>>>>> does
>>>>>>>>>>> not
>>>>>>>>>>> like our ssm_do() call. So, edit canon_dr.c around line 3273,
>>>>>>>>>>> and
>>>>>>>>>>> comment out the call to ssm_do(). Then try again with test2 :)
>>>>>>>>>>>
>>>>>>>>>>> allan
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste)
>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> change, recompile and test done.
>>>>>>>>>>>>
>>>>>>>>>>>> The test1pnm file is empty.
>>>>>>>>>>>>
>>>>>>>>>>>> The compressed test1.log is attached to this message.
>>>>>>>>>>>>
>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>
>>>>>>>>>>>> Le 03/01/2011 16:50, m. allan noah a écrit :
>>>>>>>>>>>>>
>>>>>>>>>>>>> ok- can you make some changes, recompile, and test?
>>>>>>>>>>>>>
>>>>>>>>>>>>> canon_dr.c in function set_window, around line 3615 comment
>>>>>>>>>>>>> out
>>>>>>>>>>>>> these
>>>>>>>>>>>>> lines:
>>>>>>>>>>>>>
>>>>>>>>>>>>> set_WD_brightness (desc1, s->brightness+128);
>>>>>>>>>>>>> set_WD_threshold (desc1, s->threshold);
>>>>>>>>>>>>> set_WD_contrast (desc1, s->contrast+128);
>>>>>>>>>>>>>
>>>>>>>>>>>>> Then compile, copy the library, and scan again, using this
>>>>>>>>>>>>> command:
>>>>>>>>>>>>>
>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> test1pnm 2>test1.log
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hopefully test1.pnm will contain an image. If not, compress
>>>>>>>>>>>>> the
>>>>>>>>>>>>> log
>>>>>>>>>>>>> and send it to me.
>>>>>>>>>>>>>
>>>>>>>>>>>>> allan
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan
>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Yes- I can see some set window data in it, though I am not
>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>> it
>>>>>>>>>>>>>> is
>>>>>>>>>>>>>> complete. This sniffer program seems to miss some of the
>>>>>>>>>>>>>> data. I
>>>>>>>>>>>>>> will
>>>>>>>>>>>>>> look some more today.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> have you checked the log ? Is it helpful ?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a écrit :
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thank you.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Note that I'll be away until next monday.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Le 29/12/2010 17:00, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks. I'll look at it tonight.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau
>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> the trace.wsl file taken from the snifer is attached
>>>>>>>>>>>>>>>>>> to this
>>>>>>>>>>>>>>>>>> message.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:38, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> the sniffer utility:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> We need to use that to capture traffic of a
>>>>>>>>>>>>>>>>>>> low-resolution
>>>>>>>>>>>>>>>>>>> black
>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>> white
>>>>>>>>>>>>>>>>>>> scan.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I cannot give more specific instructions, because I
>>>>>>>>>>>>>>>>>>> rarely
>>>>>>>>>>>>>>>>>>> use
>>>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>>>> program.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I will replug the scsi card into the orignal windows
>>>>>>>>>>>>>>>>>>>> machine.
>>>>>>>>>>>>>>>>>>>> Do
>>>>>>>>>>>>>>>>>>>> you have
>>>>>>>>>>>>>>>>>>>> instruction for the log capture on windows ?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> hmm- it is mad about something we ask it to do in
>>>>>>>>>>>>>>>>>>>>> the set
>>>>>>>>>>>>>>>>>>>>> window
>>>>>>>>>>>>>>>>>>>>> command. I don't have a protocol manual for this
>>>>>>>>>>>>>>>>>>>>> machine,
>>>>>>>>>>>>>>>>>>>>> so
>>>>>>>>>>>>>>>>>>>>> we
>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>> to guess what the problem is. Or, we have to try and
>>>>>>>>>>>>>>>>>>>>> capture a
>>>>>>>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>>>>>>>> from Windows driver. Can you use this machine on
>>>>>>>>>>>>>>>>>>>>> windows?
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> the new dr.log is attached to this message.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d
>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>>>>>> 2>dr.log>dr.pnm
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan
>>>>>>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> "scanimage: output is not a file, exiting"
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu
>>>>>>>>>>>>>>>>>>>>>>>>> 10.10
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners
>>>>>>>>>>>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners -- utilities
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> The sane-find-scanner commands returns :
>>>>>>>>>>>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect
>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>> scanner.
>>>>>>>>>>>>>>>>>>>>>>>>> If the
>>>>>>>>>>>>>>>>>>>>>>>>> # result is different from what you expected,
>>>>>>>>>>>>>>>>>>>>>>>>> first
>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>> # scanner is powered up and properly connected to
>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>> computer.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at
>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may
>>>>>>>>>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>>>>>>>> supported by
>>>>>>>>>>>>>>>>>>>>>>>>> SANE.
>>>>>>>>>>>>>>>>>>>>>>>>> Try
>>>>>>>>>>>>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> # No USB scanners found. If you expected something
>>>>>>>>>>>>>>>>>>>>>>>>> different,
>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB
>>>>>>>>>>>>>>>>>>>>>>>>> host
>>>>>>>>>>>>>>>>>>>>>>>>> controller
>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>>>>>> setup
>>>>>>>>>>>>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for
>>>>>>>>>>>>>>>>>>>>>>>>> details.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> # Not checking for parallel port scanners.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> # Most Scanners connected to the parallel port or
>>>>>>>>>>>>>>>>>>>>>>>>> other
>>>>>>>>>>>>>>>>>>>>>>>>> proprietary
>>>>>>>>>>>>>>>>>>>>>>>>> ports
>>>>>>>>>>>>>>>>>>>>>>>>> # can't be detected by this program.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the
>>>>>>>>>>>>>>>>>>>>>>>>> scanner
>>>>>>>>>>>>>>>>>>>>>>>>> wasn't
>>>>>>>>>>>>>>>>>>>>>>>>> recognized
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> thanks to this message :
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> ,
>>>>>>>>>>>>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at
>>>>>>>>>>>>>>>>>>>>>>>>> line
>>>>>>>>>>>>>>>>>>>>>>>>> 1203.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>>>>>>>>>>>>>>>>>>>>>> s->can_write_panel = 0;
>>>>>>>>>>>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Then I replace the compiled versions of
>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.la
>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns :
>>>>>>>>>>>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>> scanner
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Great, but the scanner doesn't work :
>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d
>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr
>>>>>>>>>>>>>>>>>>>>>>>>> to 30.
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35,
>>>>>>>>>>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>>>>>>>>>>> sane-backends
>>>>>>>>>>>>>>>>>>>>>>>>> 1.0.21
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently
>>>>>>>>>>>>>>>>>>>>>>>>> attached,
>>>>>>>>>>>>>>>>>>>>>>>>> attaching
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file
>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr.conf
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi
>>>>>>>>>>>>>>>>>>>>>>>>> CANON
>>>>>>>>>>>>>>>>>>>>>>>>> DR'
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer
>>>>>>>>>>>>>>>>>>>>>>>>> size
>>>>>>>>>>>>>>>>>>>>>>>>> (2097152/524288)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00
>>>>>>>>>>>>>>>>>>>>>>>>> ....0.
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41
>>>>>>>>>>>>>>>>>>>>>>>>> 4e 4f
>>>>>>>>>>>>>>>>>>>>>>>>> 4e
>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>> ........CANON
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20
>>>>>>>>>>>>>>>>>>>>>>>>> 20 20
>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36
>>>>>>>>>>>>>>>>>>>>>>>>> 30 37
>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>> 011020010607
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner
>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>> version
>>>>>>>>>>>>>>>>>>>>>>>>> 0110
>>>>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00
>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5
>>>>>>>>>>>>>>>>>>>>>>>>> 01 2c
>>>>>>>>>>>>>>>>>>>>>>>>> 01
>>>>>>>>>>>>>>>>>>>>>>>>> 2c
>>>>>>>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>>>>>>>> c8
>>>>>>>>>>>>>>>>>>>>>>>>> ....#.,.,..,.,..
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00
>>>>>>>>>>>>>>>>>>>>>>>>> 13 ee
>>>>>>>>>>>>>>>>>>>>>>>>> 0e
>>>>>>>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>>>>>>>> .d............
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] standard options
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] AWD: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] High quality: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] grayscale: 1
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] halftone: 1
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] monochrome: 1
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] overflow: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner
>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>> '' (0)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>> '' (0)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x'
>>>>>>>>>>>>>>>>>>>>>>>>> (8)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x'
>>>>>>>>>>>>>>>>>>>>>>>>> (6)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y'
>>>>>>>>>>>>>>>>>>>>>>>>> (9)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y'
>>>>>>>>>>>>>>>>>>>>>>>>> (7)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x'
>>>>>>>>>>>>>>>>>>>>>>>>> (6)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for
>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x'
>>>>>>>>>>>>>>>>>>>>>>>>> (8)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y'
>>>>>>>>>>>>>>>>>>>>>>>>> (7)
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for
>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y'
>>>>>>>>>>>>>>>>>>>>>>>>> (9)
>>>>>>>>>>>>>>>>>>>>>>>>> scanimage: output is not a file, exiting
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Any idea ?
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel mailing list:
>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe
>>>>>>>>>>>>>>>>>>>>>>>>> your_password"
>>>>>>>>>>>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Christophe Largeau
>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Christophe Largeau
>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Christophe Largeau
>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Christophe Largeau
>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>
>>
>>
>>
>
>

-- 
Christophe Largeau
Alixen 20 rue Jean Rostand 91 400 Orsay
Tel : 01 60 19 72 31, Fax : 01 69 41 78 54