[sane-devel] trying Canon DR-5060-F

Christophe Largeau (liste) liste at alixen.fr
Wed Jan 5 16:53:21 UTC 2011


I've done the following tests :

test8 :
	command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 100 --mode Gray 
 > test8.pnm 2>test8.log
	comment : 1 A4 paper portrait
	result : OK

test9 :
	command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 150 --mode Gray 
 > test9.pnm 2>test9.log
	comment : 1 A4 paper portrait
	result : OK

test10 :
	command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray 
 > test10.pnm 2>test10.log
	comment : 1 A4 paper portrait
	result : OK

test11 :
	command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 250 --mode Gray 
 > test11.pnm 2>test11.log
	comment : 1 A4 paper portrait
	result : OK

test12 :
	command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 300 --mode Gray 
 > test12.pnm 2>test12.log
	comment : 1 A4 paper portrait
	result : OK

test13 :
	command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 600 --mode Gray 
 > test13.pnm 2>test13.log
	comment : 1 A4 paper portrait
	result : OK (falling back to 300)

test14 :
	command : SANE_DEBUG_CANON_DR=30 scanimage -b --resolution 300 --mode 
Gray --batch=test14_%d.pnm 2>test14.log
	comment : 2 A4 paper portrait
	result : OK

test15 :
	command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 300 --mode Gray 
-l 0 -t 0 -x 295.279 -y 431.914 --page-width 295.279mm --page-height 
431.914mm > test15.pnm 2>test15.log
	comment : 1 A3 paper portrait
	result : OK

the tests8to15.tar.gz file with all the test (log and pnm) is here : 
http://dl.free.fr/b6JQuOUjm

Christophe.

Le 05/01/2011 15:58, Christophe Largeau (liste) a écrit :
> Oops... Sorry.
>
> I'll make new tests for the multiple sheets and sizes too.
>
> Christophe.
>
> Le 05/01/2011 15:46, m. allan noah a écrit :
>> If you wish to get multiple images, or use duplex, you must add the -b
>> flag to scanimage. it will make multiple image files in the current
>> directory. see the manpage for naming of files.
>>
>> if you wish to change the size of the scan, you must set the paper
>> size, and then set the width and height of the image. see scanimage
>> --help for list of options.
>>
>> allan
>>
>> On Wed, Jan 5, 2011 at 9:43 AM, Christophe Largeau (liste)
>> <liste at alixen.fr> wrote:
>>> Ok for other tests based on the resolution.
>>>
>>> I've done more tests just "to see" :
>>> - loading 2 A4 sheets on the scanner feeder => only one processed
>>> - I've placed one A4 sheet in the feeder but in a landscape position
>>> : nice
>>> try (no left or right side ;) )
>>>
>>> I also thought about the log of windows driver.
>>>
>>> Christophe.
>>>
>>> Le 05/01/2011 13:56, m. allan noah a écrit :
>>>>
>>>> Ok. Perhaps you can do some more tests in grayscale with sane, where
>>>> you change something like resolution or the scan width each time. I
>>>> want to make sure that gray works properly. If you find any problems,
>>>> please send the logs and the command line you used.
>>>>
>>>> After that, I am afraid we will need to get another log of the windows
>>>> driver, this time making a black&white scan.
>>>>
>>>> allan
>>>>
>>>> On Wed, Jan 5, 2011 at 5:50 AM, Christophe Largeau (liste)
>>>> <liste at alixen.fr> wrote:
>>>>>
>>>>> just done test7 (Lineart mode). The result is a black image (
>>>>> http://dl.free.fr/bDipeF5mF
>>>>> )
>>>>>
>>>>> Christophe.
>>>>>
>>>>> Le 05/01/2011 09:23, Christophe Largeau (liste) a écrit :
>>>>>>
>>>>>> Great, it's working fine (see the test6.tar.gz at
>>>>>> http://dl.free.fr/bGEgn9yFu )
>>>>>>
>>>>>> I'll make series of tests at other resolutions.
>>>>>>
>>>>>> Thanx.
>>>>>>
>>>>>> Le 04/01/2011 17:53, m. allan noah a écrit :
>>>>>>>
>>>>>>> ok- let us try again, slightly updated file.
>>>>>>>
>>>>>>> allan
>>>>>>>
>>>>>>> On Tue, Jan 4, 2011 at 11:26 AM, Christophe Largeau (liste)
>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> thank you for the new version.
>>>>>>>>
>>>>>>>> The scan is not exactly what it should be (see the file
>>>>>>>> test5.tar.gz). The
>>>>>>>> scanned image is not at the right position. Probably a shift
>>>>>>>> problem.
>>>>>>>>
>>>>>>>> Note that for all the tests I've done it was a A4 paper and the
>>>>>>>> Canon
>>>>>>>> DR-5060-F is a A3 scanner.
>>>>>>>>
>>>>>>>> the file test5.tar.gz can be downloaded here :
>>>>>>>> http://dl.free.fr/baKWwnrcy
>>>>>>>>
>>>>>>>> Christophe.
>>>>>>>>
>>>>>>>> Le 04/01/2011 16:23, m. allan noah a écrit :
>>>>>>>>>
>>>>>>>>> here is a new version of two files. use these to replace your
>>>>>>>>> existing
>>>>>>>>> copies, and recompile. This should contain all of your current
>>>>>>>>> fixes,
>>>>>>>>> and it should (hopefully) produce proper grayscale scans.
>>>>>>>>>
>>>>>>>>> If you can test this also in lineart mode, it might need the same
>>>>>>>>> width fix as grayscale...
>>>>>>>>>
>>>>>>>>> allan
>>>>>>>>>
>>>>>>>>> On Tue, Jan 4, 2011 at 4:33 AM, Christophe Largeau (liste)
>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>
>>>>>>>>>> Thank you for the information, waiting for your fix.
>>>>>>>>>>
>>>>>>>>>> Christophe.
>>>>>>>>>>
>>>>>>>>>> Le 03/01/2011 20:03, m. allan noah a écrit :
>>>>>>>>>>>
>>>>>>>>>>> It appears that the corrupt image is because the scanner
>>>>>>>>>>> sends us
>>>>>>>>>>> 1728
>>>>>>>>>>> pixels per line, but we asked for only 1700. Likely this
>>>>>>>>>>> means that
>>>>>>>>>>> the scanner is limited to image widths which are a multiple
>>>>>>>>>>> of 32
>>>>>>>>>>> pixels. I will see if I can come up with a fix.
>>>>>>>>>>>
>>>>>>>>>>> allan
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Jan 3, 2011 at 12:54 PM, m. allan
>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> jpg destroys too much image information. Any chance to can
>>>>>>>>>>>> compress
>>>>>>>>>>>> the pnm instead, and send that to me directly?
>>>>>>>>>>>>
>>>>>>>>>>>> allan
>>>>>>>>>>>>
>>>>>>>>>>>> On Mon, Jan 3, 2011 at 12:11 PM, Christophe Largeau (liste)
>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> OK,
>>>>>>>>>>>>>
>>>>>>>>>>>>> my A4 page (basically 0.5 millimeter squares) has been
>>>>>>>>>>>>> processed
>>>>>>>>>>>>>
>>>>>>>>>>>>> you can view the result here
>>>>>>>>>>>>> http://i37.servimg.com/u/f37/15/57/48/39/test3p10.jpg : not
>>>>>>>>>>>>> really the
>>>>>>>>>>>>> expected result ;)
>>>>>>>>>>>>>
>>>>>>>>>>>>> You'll find the compressed test3.log attached to this message.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Do you need other informations for ssm_df() and ssm_do()
>>>>>>>>>>>>> debugging ?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Le 03/01/2011 17:45, m. allan noah a écrit :
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Ah- same thing, this time also comment out ssm_df(). It would
>>>>>>>>>>>>>> be nice
>>>>>>>>>>>>>> to get those two commands working for your machine (if
>>>>>>>>>>>>>> they are
>>>>>>>>>>>>>> supported by the hardware), but they are not required for
>>>>>>>>>>>>>> proper
>>>>>>>>>>>>>> functioning.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:40 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Here is the new test2.log ;)
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Le 03/01/2011 17:31, m. allan noah a écrit :
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Excellent. set_window is now accepted by the scanner,
>>>>>>>>>>>>>>>> but it
>>>>>>>>>>>>>>>> does
>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>> like our ssm_do() call. So, edit canon_dr.c around line
>>>>>>>>>>>>>>>> 3273,
>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>> comment out the call to ssm_do(). Then try again with
>>>>>>>>>>>>>>>> test2 :)
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> change, recompile and test done.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> The test1pnm file is empty.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> The compressed test1.log is attached to this message.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Le 03/01/2011 16:50, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> ok- can you make some changes, recompile, and test?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> canon_dr.c in function set_window, around line 3615
>>>>>>>>>>>>>>>>>> comment
>>>>>>>>>>>>>>>>>> out
>>>>>>>>>>>>>>>>>> these
>>>>>>>>>>>>>>>>>> lines:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> set_WD_brightness (desc1, s->brightness+128);
>>>>>>>>>>>>>>>>>> set_WD_threshold (desc1, s->threshold);
>>>>>>>>>>>>>>>>>> set_WD_contrast (desc1, s->contrast+128);
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Then compile, copy the library, and scan again, using
>>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>>> command:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode
>>>>>>>>>>>>>>>>>> Gray
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> test1pnm 2>test1.log
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hopefully test1.pnm will contain an image. If not,
>>>>>>>>>>>>>>>>>> compress
>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>>>>> and send it to me.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan
>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Yes- I can see some set window data in it, though I
>>>>>>>>>>>>>>>>>>> am not
>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>>>> complete. This sniffer program seems to miss some of the
>>>>>>>>>>>>>>>>>>> data. I
>>>>>>>>>>>>>>>>>>> will
>>>>>>>>>>>>>>>>>>> look some more today.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> have you checked the log ? Is it helpful ?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a
>>>>>>>>>>>>>>>>>>>> écrit :
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Thank you.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Note that I'll be away until next monday.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 17:00, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Thanks. I'll look at it tonight.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> the trace.wsl file taken from the snifer is attached
>>>>>>>>>>>>>>>>>>>>>>> to this
>>>>>>>>>>>>>>>>>>>>>>> message.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:38, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> the sniffer utility:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> We need to use that to capture traffic of a
>>>>>>>>>>>>>>>>>>>>>>>> low-resolution
>>>>>>>>>>>>>>>>>>>>>>>> black
>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>> white
>>>>>>>>>>>>>>>>>>>>>>>> scan.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> I cannot give more specific instructions, because I
>>>>>>>>>>>>>>>>>>>>>>>> rarely
>>>>>>>>>>>>>>>>>>>>>>>> use
>>>>>>>>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>>>>>>>>> program.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> I will replug the scsi card into the orignal
>>>>>>>>>>>>>>>>>>>>>>>>> windows
>>>>>>>>>>>>>>>>>>>>>>>>> machine.
>>>>>>>>>>>>>>>>>>>>>>>>> Do
>>>>>>>>>>>>>>>>>>>>>>>>> you have
>>>>>>>>>>>>>>>>>>>>>>>>> instruction for the log capture on windows ?
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> hmm- it is mad about something we ask it to do in
>>>>>>>>>>>>>>>>>>>>>>>>>> the set
>>>>>>>>>>>>>>>>>>>>>>>>>> window
>>>>>>>>>>>>>>>>>>>>>>>>>> command. I don't have a protocol manual for this
>>>>>>>>>>>>>>>>>>>>>>>>>> machine,
>>>>>>>>>>>>>>>>>>>>>>>>>> so
>>>>>>>>>>>>>>>>>>>>>>>>>> we
>>>>>>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>>>>>>> to guess what the problem is. Or, we have to
>>>>>>>>>>>>>>>>>>>>>>>>>> try and
>>>>>>>>>>>>>>>>>>>>>>>>>> capture a
>>>>>>>>>>>>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>>>>>>>>>>>>> from Windows driver. Can you use this machine on
>>>>>>>>>>>>>>>>>>>>>>>>>> windows?
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe
>>>>>>>>>>>>>>>>>>>>>>>>>> Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> the new dr.log is attached to this message.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d
>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2>dr.log>dr.pnm
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan
>>>>>>>>>>>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "scanimage: output is not a file, exiting"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.10
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners -- utilities
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The sane-find-scanner commands returns :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> detect
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # result is different from what you expected,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> first
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # scanner is powered up and properly
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> connected
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> computer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> or may
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> supported by
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Try
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # scanimage -L and read the backend's
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> manpage.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # No USB scanners found. If you expected
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> something
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # you have loaded a kernel driver for your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> USB
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> host
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> controller
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> setup
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # the USB system correctly. See man
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-usb for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> details.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Not checking for parallel port scanners.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Most Scanners connected to the parallel
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> port
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> other
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> proprietary
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ports
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # can't be detected by this program.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wasn't
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> recognized
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thanks to this message :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I've added the following lines to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr.c at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> line
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1203.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> s->can_write_panel = 0;
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Then I replace the compiled versions of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.la
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great, but the scanner doesn't work :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to 30.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1.0.35,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-backends
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1.0.21
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> attached,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> attaching
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> config file
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr.conf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'scsi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CANON
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> buffer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> size
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (2097152/524288)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....0.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 4e 4f
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 4e
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........CANON
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 30 37
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 011020010607
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0110
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 01 2c
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 01
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2c
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> c8
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....#.,.,..,.,..
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 13 ee
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0e
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .d............
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] standard options
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] AWD: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] High quality: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] grayscale: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] halftone: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] monochrome: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] overflow: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner(s)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> requested
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (8)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (6)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (9)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (7)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (6)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (8)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (7)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (9)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanimage: output is not a file, exiting
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Any idea ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel mailing list:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "unsubscribe
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your_password"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Christophe Largeau
>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Christophe Largeau
>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> Christophe Largeau
>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Christophe Largeau
>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>
>>
>>
>>
>
>

-- 
Christophe Largeau
Alixen 20 rue Jean Rostand 91 400 Orsay
Tel : 01 60 19 72 31, Fax : 01 69 41 78 54



More information about the sane-devel mailing list