[sane-devel] Epson MFP Stylus DX3850 via Net won't work

cool.chris65 at web.de cool.chris65 at web.de
Fri Jan 21 06:51:39 UTC 2011


Am Freitag 21 Januar 2011, um 01:32:55 schrieb Olaf Meeuwissen:
> cool.chris65 at web.de writes:

> In your the third try, the device doesn't acknowledge the same command
> during the probe phase.  Looks like something went wrong while talking
> to the device but I have no idea what.  Can you create logs of the USB
> traffic?
> 
>   root at fritz:/var/mod/root# SANE_DEBUG_SANEI_USB=128 saned -d128
> 
> or similar should do the trick.
> 
> Hope this helps,

Hi,

here it is:
---
root at fritz:/var/mod/root# SANE_DEBUG_SANEI_USB=128 saned -d128
[saned] main: starting debug mode (level 128)
[saned] read_config: searching for config file
[saned] read_config: done reading config
[saned] saned (AF-indep+IPv6) from sane-backends 1.0.21 starting up
[saned] do_bindings: trying to get port for service "sane-port" (getaddrinfo)
[saned] do_bindings: " sane-port " service unknown on your host; you should 
add
[saned] do_bindings:      sane-port 6566/tcp saned # SANE network scanner 
daemon
[saned] do_bindings: to your /etc/services file (or equivalent). Proceeding 
anyway.
[saned] do_bindings: [0] socket () using IPv6
[saned] do_bindings: [0] setsockopt ()
[saned] do_bindings: [0] bind () to port 6566
[saned] do_bindings: [0] listen ()
[saned] do_bindings: [1] socket () using IPv4
[saned] do_bindings: [1] setsockopt ()
[saned] do_bindings: [1] bind () to port 6566
[saned] do_bindings: [1] bind failed: Address already in use
[saned] run_standalone: waiting for control connection
[saned] handle_connection: processing client connection
[saned] check_host: detected an IPv4-mapped address
[saned] check_host: access by remote host: ::ffff:192.168.1.8
[saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK
[saned] check_host: local hostname: fritz.fonwlan.box
[saned] check_host: local hostname(s) (from DNS): fritz.box
[saned] check_host: local hostname(s) (from DNS): fritz.box
[saned] check_host: local hostname(s) (from DNS): fritz.box
[saned] check_host: remote host doesn't have same addr as local
[saned] check_host: opening config file: /etc/hosts.equiv
[saned] check_host: can't open config file: /etc/hosts.equiv (No such file or 
directory)
[saned] check_host: opening config file: saned.conf
[saned] check_host: config file line: `192.168.1.0/24'
[saned] check_host: subnet with base IP = 192.168.1.0, CIDR netmask = 24
[saned] check_host: access granted from IP address 192.168.1.8 (in subnet 
192.168.1.0/24)
[saned] init: access granted
[saned] init: access granted to saned-user@::ffff:192.168.1.8
[saned] process_request: waiting for request
[saned] process_request: got request 1
[sanei_debug] Setting debug level of sanei_usb to 128.
[sanei_usb] sanei_usb_init: marking existing devices
[sanei_usb] sanei_usb_init: Looking for kernel scanner devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_set_debug: Setting debugging level to 255 (on)
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 011 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0818) interface 0  
at libusb:001:011
[sanei_usb] store_device: add dn 0 with libusb:001:011
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_init: device 00 is libusb:001:011
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0101
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0103
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0104
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0105
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0106
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0107
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0109
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010b
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0110
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0112
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011b
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0126
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0128
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0129
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x012a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x012b
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x012c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0135
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0801
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0802
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0805
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0806
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0807
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0808
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x080d
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x080e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x080f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0810
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0811
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0813
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0814
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0815
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0817
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0818
[sanei_usb] sanei_usb_open: trying to open device `libusb:001:011'
USB error: could not set config 1: Device or resource busy
[sanei_usb] sanei_usb_open: libusb complained: could not set config 1: Device 
or resource busy
[sanei_usb] Maybe the kernel scanner driver or usblp claims the interface? 
Ignoring this error...
[sanei_usb] sanei_usb_open: configuration nr: 0
[sanei_usb] sanei_usb_open:     interface nr: 0
[sanei_usb] sanei_usb_open:   alt_setting nr: 0
[sanei_usb] sanei_usb_open: endpoint nr: 0
[sanei_usb] sanei_usb_open: direction: 128
[sanei_usb] sanei_usb_open: address: 1 transfertype: 2
[sanei_usb] sanei_usb_open: found bulk-in endpoint (address 0x01)
[sanei_usb] sanei_usb_open: endpoint nr: 1
[sanei_usb] sanei_usb_open: direction: 0
[sanei_usb] sanei_usb_open: address: 2 transfertype: 2
[sanei_usb] sanei_usb_open: found bulk-out endpoint (address 0x02)
[sanei_usb] sanei_usb_open: configuration nr: 0
[sanei_usb] sanei_usb_open:     interface nr: 1
[sanei_usb] sanei_usb_open:   alt_setting nr: 0
[sanei_usb] sanei_usb_open: interface 1 not detected as a scanner by 
sanei_usb_init, ignoring.
[sanei_usb] sanei_usb_open: opened usb device `libusb:001:011' (*dn=0)
[sanei_usb] sanei_usb_get_vendor_product: device 0: vendorID: 0x04b8, 
productID: 0x0818
[sanei_usb] sanei_usb_write_bulk: trying to write 2 bytes
[sanei_usb] 000 1B 40                                           .@              
[sanei_usb] sanei_usb_write_bulk: write failed: Resource temporarily 
unavailable
[sanei_usb] sanei_usb_write_bulk: trying to write 2 bytes
[sanei_usb] 000 1B 66                                           .f              
[sanei_usb] sanei_usb_write_bulk: write failed: Resource temporarily 
unavailable
[sanei_usb] sanei_usb_close: closing device 0
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0819
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081d
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0820
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0827
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0828
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0829
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082b
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0830
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0833
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0834
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0835
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0836
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0837
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0838
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0839
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x083a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x083c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0841
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0843
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0844
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0846
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0847
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0848
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0849
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x084a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x084c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0000
[sanei_debug] Setting debug level of sanei_usb to 128.
[sanei_usb] sanei_usb_init: marking existing devices
[sanei_usb] sanei_usb_init: Looking for kernel scanner devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_os_init: Found USB VFS at /proc/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 011 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
[sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0818) interface 0  
at libusb:001:011
[sanei_usb] store_device: add dn 0 with libusb:001:011
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_init: device 00 is libusb:001:011
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0101
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0103
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0104
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0105
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0106
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0107
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0109
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010b
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0110
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0112
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011b
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0126
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0128
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0129
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x012a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x012b
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x012c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0135
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0801
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0802
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0805
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0806
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0807
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0808
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x080d
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x080e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x080f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0810
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0811
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0813
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0814
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0815
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0817
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0818
[sanei_usb] sanei_usb_open: trying to open device `libusb:001:011'
USB error: could not set config 1: Device or resource busy
[sanei_usb] sanei_usb_open: libusb complained: could not set config 1: Device 
or resource busy
[sanei_usb] Maybe the kernel scanner driver or usblp claims the interface? 
Ignoring this error...
[sanei_usb] sanei_usb_open: configuration nr: 0
[sanei_usb] sanei_usb_open:     interface nr: 0
[sanei_usb] sanei_usb_open:   alt_setting nr: 0
[sanei_usb] sanei_usb_open: endpoint nr: 0
[sanei_usb] sanei_usb_open: direction: 128
[sanei_usb] sanei_usb_open: address: 1 transfertype: 2
[sanei_usb] sanei_usb_open: found bulk-in endpoint (address 0x01)
[sanei_usb] sanei_usb_open: endpoint nr: 1
[sanei_usb] sanei_usb_open: direction: 0
[sanei_usb] sanei_usb_open: address: 2 transfertype: 2
[sanei_usb] sanei_usb_open: found bulk-out endpoint (address 0x02)
[sanei_usb] sanei_usb_open: configuration nr: 0
[sanei_usb] sanei_usb_open:     interface nr: 1
[sanei_usb] sanei_usb_open:   alt_setting nr: 0
[sanei_usb] sanei_usb_open: interface 1 not detected as a scanner by 
sanei_usb_init, ignoring.
[sanei_usb] sanei_usb_open: opened usb device `libusb:001:011' (*dn=0)
[sanei_usb] sanei_usb_get_vendor_product: device 0: vendorID: 0x04b8, 
productID: 0x0818
[sanei_usb] sanei_usb_write_bulk: trying to write 2 bytes
[sanei_usb] 000 1B 40                                           .@              
[sanei_usb] sanei_usb_write_bulk: write failed: Resource temporarily 
unavailable
[sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes
[sanei_usb] sanei_usb_read_bulk: read failed: Resource temporarily unavailable
[sanei_usb] sanei_usb_write_bulk: trying to write 2 bytes
[sanei_usb] 000 1B 49                                           .I              
[sanei_usb] sanei_usb_write_bulk: write failed: Resource temporarily 
unavailable
[sanei_usb] sanei_usb_write_bulk: trying to write 2 bytes
[sanei_usb] 000 1B 49                                           .I              
[sanei_usb] sanei_usb_write_bulk: write failed: Resource temporarily 
unavailable
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0819
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081d
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0820
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0827
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0828
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0829
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082b
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082e
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0830
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0833
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0834
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0835
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0836
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0837
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0838
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0839
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x083a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x083c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0841
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0843
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0844
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0846
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0847
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0848
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0849
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x084a
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x084c
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0000
[saned] process_request: waiting for request
[saned] process_request: got request 10
[saned] bailing out, waiting for children...
[saned] bail_out: all children exited
root at fritz:/var/mod/root# 
---
Greetz,

Christoph
-- 
GPG-Fingerprint: 171A 6F66 52E5 A6CE D664 2427 832F E711 7442 8261
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110121/1cfdc674/attachment-0001.pgp>


More information about the sane-devel mailing list