[sane-devel] epson V100

Stéphanie Vilayphiou stephanie.vilayphiou at gmail.com
Mon Oct 10 15:20:35 UTC 2011


Not sure where to find this info.
But this is what xsane gives me:

Vendor: Epson
Model: 
Type: Flatbed scanner
Device: 005
Loaded backend: epson:libusb:002
Sane version: 1.0.22

Stéphanie


On Mon 10 Oct 2011 05:04:11 PM CEST, m. allan noah wrote:
> What version of sane-backends are you running?
>
> allan
>
> On Mon, Oct 10, 2011 at 10:30 AM, Stéphanie Vilayphiou
> <stephanie.vilayphiou at gmail.com>  wrote:
>> Hi,
>> several years ago, I bought an Epson V100 for it was suitable for Linux. At
>> the time I was running Ubuntu.
>> Now I tried to use it under Arch Linux and I have some struggles...
>>
>> I installed those packages from the aur reposit:
>> iscan-data
>>
>> here is some output:
>>>> sane-find-scanner
>> found USB scanner (vendor=0x04b8 [EPSON], product=0x012d [EPSON Scanner]) at
>> libusb:002:003
>>    # Your USB scanner was (probably) detected. It may or may not be supported
>> by
>>    # SANE. Try scanimage -L and read the backend's manpage.
>>
>>>> scanimage -L
>> hdevice `epkowa:usb:002:003' is a Epson (unknown model) flatbed scanner
>> device `epson:libusb:002:003' is a Epson  flatbed scanner
>>
>>>> in /etc/sane.d/epkowa.conf and in /etc/sane.d/epson.conf I have:
>> usb
>> usb 0x04b8 0x012d
>> usb /dev/usb/scanner0
>>
>>>> iscan
>> Could not send command to scanner.
>> Check scanner's status.
>>
>>
>>>> xsane
>> It proposes me to choose between 2 devices:
>> epkowa:usb:002:003
>> Doesn't seem to end into anything.
>> epson:libusb:002:003
>> Opens up xsane, but when trying to preview or scan: "Failed to start
>> scanner: Invalid argumenth"
>>
>> Doing all those things with sudo leads to the same results.
>> I do not know where to look anymore...
>> Does someone have a hint?
>> Thanks!
>>
>> Stéphanie
>>
>> --
>> ----
>> Stéphanie Vilayphiou
>> <stdin>
>> http://stdin.fr/
>> +32 (0)4 89 00 88 59
>>
>>
>> --
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>              to sane-devel-request at lists.alioth.debian.org
>>
>
>
>

-- 
----
Stéphanie Vilayphiou
<stdin>
http://stdin.fr/
+32 (0)4 89 00 88 59



More information about the sane-devel mailing list