[sane-devel] brigthness with Canon iDE110
Felipe de Jesus Garcia Martinez
felipe.garcia at microformas.com.mx
Thu Dec 6 18:11:52 UTC 2012
Thanks Allan but:
command line:
scanimage --device-name=genesys --brightness=10 --format=tiff >otra.tiff
result:
scanimage: unrecognized option '--brightness=10'
Felipe García Martínez
Gerente de Sistemas Internos
Microformas, S.A. de C.V.
Tel. 11675219
Cel. 5510496939
El presente mensaje de datos, contiene información confidencial que
también puede constituir un secreto industrial propiedad de
MICROFORMAS, S.A. DE C.V. y va dirigido al destinatario. Si usted no
es el destinatario del presente mensaje de datos, por este conducto,
se le informa, para todos los efectos a que haya lugar, que no cuenta
con la autorización para divulgar, usar, apoderarse, copiar,
distribuir, reproducir y/o tomar cualquier acción en relación al
contenido de este mensaje de datos, por lo cual, lo anterior queda
expresamente prohibido. Se le solicita que notifique inmediatamente
por correo electrónico al remitente si usted recibió este correo por
error y, además, deberá de borrar este mensaje de datos de su sistema
o computadora o dispositivo.
La transmisión por medios electrónicos no puede garantizar que sea
segura o libre de errores, toda vez que la información puede ser
interceptada, corrompida, alterada, destruida, llegar demorada o
incompleta o contener virus. Por tal motivo, el remitente no asume
responsabilidad alguna por lo anterior y si se requiere verificación,
hacerlo por teléfono, a través de otro correo electrónico, o bien,
solicitar una versión escrita de manera física, a manera de
confrmación.
MICROFORMAS, S.A. DE C.V., Luz Saviñon 1558 Col. Narvarte, Del. Benito
Juárez C.P. 03020, México D.F., www.microformas.com.mx
2012/12/6 m. allan noah <kitno455 at gmail.com>:
> You have misspelled brightness.
>
> allan
>
> On Thu, Dec 6, 2012 at 12:50 PM, Felipe de Jesus Garcia Martinez
> <felipe.garcia at microformas.com.mx> wrote:
>> I try to use my Canon iDE110 with brigthness parameter but scanimage:
>> unrecognized option '--brigthness=10' some one know if that is
>> possible?
>>
>> root at GSI-000434:/home/val# scanimage --device-name=genesys
>> --brigthness=10 --format=tiff >otra.tiff
>> [sanei_debug] Setting debug level of dll to 255.
>> [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.22
>> [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
>> [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
>> [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
>> [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
>> [dll] sane_init/read_config: reading dll.d/hplip
>> [dll] add_backend: adding backend `hpaio'
>> [dll] sane_init/read_dlld: done.
>> [dll] sane_init/read_config: reading dll.conf
>> [dll] add_backend: adding backend `net'
>> [dll] add_backend: adding backend `abaton'
>> [dll] add_backend: adding backend `agfafocus'
>> [dll] add_backend: adding backend `apple'
>> [dll] add_backend: adding backend `avision'
>> [dll] add_backend: adding backend `artec'
>> [dll] add_backend: adding backend `artec_eplus48u'
>> [dll] add_backend: adding backend `as6e'
>> [dll] add_backend: adding backend `bh'
>> [dll] add_backend: adding backend `canon'
>> [dll] add_backend: adding backend `canon630u'
>> [dll] add_backend: adding backend `canon_dr'
>> [dll] add_backend: adding backend `cardscan'
>> [dll] add_backend: adding backend `coolscan'
>> [dll] add_backend: adding backend `coolscan3'
>> [dll] add_backend: adding backend `dell1600n_net'
>> [dll] add_backend: adding backend `dmc'
>> [dll] add_backend: adding backend `epjitsu'
>> [dll] add_backend: adding backend `epson2'
>> [dll] add_backend: adding backend `fujitsu'
>> [dll] add_backend: adding backend `genesys'
>> [dll] add_backend: adding backend `gt68xx'
>> [dll] add_backend: adding backend `hp'
>> [dll] add_backend: adding backend `hp3900'
>> [dll] add_backend: adding backend `hpsj5s'
>> [dll] add_backend: adding backend `hp3500'
>> [dll] add_backend: adding backend `hp4200'
>> [dll] add_backend: adding backend `hp5400'
>> [dll] add_backend: adding backend `hp5590'
>> [dll] add_backend: adding backend `hpljm1005'
>> [dll] add_backend: adding backend `hs2p'
>> [dll] add_backend: adding backend `ibm'
>> [dll] add_backend: adding backend `kodak'
>> [dll] add_backend: adding backend `kvs1025'
>> [dll] add_backend: adding backend `kvs20xx'
>> [dll] add_backend: adding backend `leo'
>> [dll] add_backend: adding backend `lexmark'
>> [dll] add_backend: adding backend `ma1509'
>> [dll] add_backend: adding backend `magicolor'
>> [dll] add_backend: adding backend `matsushita'
>> [dll] add_backend: adding backend `microtek'
>> [dll] add_backend: adding backend `microtek2'
>> [dll] add_backend: adding backend `mustek'
>> [dll] add_backend: adding backend `mustek_usb'
>> [dll] add_backend: adding backend `mustek_usb2'
>> [dll] add_backend: adding backend `nec'
>> [dll] add_backend: adding backend `niash'
>> [dll] add_backend: adding backend `pie'
>> [dll] add_backend: adding backend `pixma'
>> [dll] add_backend: adding backend `plustek'
>> [dll] add_backend: adding backend `qcam'
>> [dll] add_backend: adding backend `ricoh'
>> [dll] add_backend: adding backend `rts8891'
>> [dll] add_backend: adding backend `s9036'
>> [dll] add_backend: adding backend `sceptre'
>> [dll] add_backend: adding backend `sharp'
>> [dll] add_backend: adding backend `sm3600'
>> [dll] add_backend: adding backend `sm3840'
>> [dll] add_backend: adding backend `snapscan'
>> [dll] add_backend: adding backend `sp15c'
>> [dll] add_backend: adding backend `tamarack'
>> [dll] add_backend: adding backend `teco1'
>> [dll] add_backend: adding backend `teco2'
>> [dll] add_backend: adding backend `teco3'
>> [dll] add_backend: adding backend `u12'
>> [dll] add_backend: adding backend `umax'
>> [dll] add_backend: adding backend `umax1220u'
>> [dll] add_backend: adding backend `v4l'
>> [dll] add_backend: adding backend `xerox_mfp'
>> [dll] sane_open: trying to open `genesys'
>> [dll] load: searching backend `genesys' in
>> `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
>> [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
>> [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
>> [dll] init: initializing backend `genesys'
>> [dll] init: backend `genesys' is version 1.0.63
>> scanimage: open of device genesys failed: Invalid argument
>> [dll] sane_exit: exiting
>> [dll] sane_exit: calling backend `genesys's exit function
>> [dll] sane_exit: finished
>> root at GSI-000434:/home/val# scanimage --device-name=genesys
>> --brigthness=10 --format=tiff >otra.tiff
>> [sanei_debug] Setting debug level of dll to 255.
>> [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.22
>> [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
>> [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
>> [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
>> [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
>> [dll] sane_init/read_config: reading dll.d/hplip
>> [dll] add_backend: adding backend `hpaio'
>> [dll] sane_init/read_dlld: done.
>> [dll] sane_init/read_config: reading dll.conf
>> [dll] add_backend: adding backend `net'
>> [dll] add_backend: adding backend `abaton'
>> [dll] add_backend: adding backend `agfafocus'
>> [dll] add_backend: adding backend `apple'
>> [dll] add_backend: adding backend `avision'
>> [dll] add_backend: adding backend `artec'
>> [dll] add_backend: adding backend `artec_eplus48u'
>> [dll] add_backend: adding backend `as6e'
>> [dll] add_backend: adding backend `bh'
>> [dll] add_backend: adding backend `canon'
>> [dll] add_backend: adding backend `canon630u'
>> [dll] add_backend: adding backend `canon_dr'
>> [dll] add_backend: adding backend `cardscan'
>> [dll] add_backend: adding backend `coolscan'
>> [dll] add_backend: adding backend `coolscan3'
>> [dll] add_backend: adding backend `dell1600n_net'
>> [dll] add_backend: adding backend `dmc'
>> [dll] add_backend: adding backend `epjitsu'
>> [dll] add_backend: adding backend `epson2'
>> [dll] add_backend: adding backend `fujitsu'
>> [dll] add_backend: adding backend `genesys'
>> [dll] add_backend: adding backend `gt68xx'
>> [dll] add_backend: adding backend `hp'
>> [dll] add_backend: adding backend `hp3900'
>> [dll] add_backend: adding backend `hpsj5s'
>> [dll] add_backend: adding backend `hp3500'
>> [dll] add_backend: adding backend `hp4200'
>> [dll] add_backend: adding backend `hp5400'
>> [dll] add_backend: adding backend `hp5590'
>> [dll] add_backend: adding backend `hpljm1005'
>> [dll] add_backend: adding backend `hs2p'
>> [dll] add_backend: adding backend `ibm'
>> [dll] add_backend: adding backend `kodak'
>> [dll] add_backend: adding backend `kvs1025'
>> [dll] add_backend: adding backend `kvs20xx'
>> [dll] add_backend: adding backend `leo'
>> [dll] add_backend: adding backend `lexmark'
>> [dll] add_backend: adding backend `ma1509'
>> [dll] add_backend: adding backend `magicolor'
>> [dll] add_backend: adding backend `matsushita'
>> [dll] add_backend: adding backend `microtek'
>> [dll] add_backend: adding backend `microtek2'
>> [dll] add_backend: adding backend `mustek'
>> [dll] add_backend: adding backend `mustek_usb'
>> [dll] add_backend: adding backend `mustek_usb2'
>> [dll] add_backend: adding backend `nec'
>> [dll] add_backend: adding backend `niash'
>> [dll] add_backend: adding backend `pie'
>> [dll] add_backend: adding backend `pixma'
>> [dll] add_backend: adding backend `plustek'
>> [dll] add_backend: adding backend `qcam'
>> [dll] add_backend: adding backend `ricoh'
>> [dll] add_backend: adding backend `rts8891'
>> [dll] add_backend: adding backend `s9036'
>> [dll] add_backend: adding backend `sceptre'
>> [dll] add_backend: adding backend `sharp'
>> [dll] add_backend: adding backend `sm3600'
>> [dll] add_backend: adding backend `sm3840'
>> [dll] add_backend: adding backend `snapscan'
>> [dll] add_backend: adding backend `sp15c'
>> [dll] add_backend: adding backend `tamarack'
>> [dll] add_backend: adding backend `teco1'
>> [dll] add_backend: adding backend `teco2'
>> [dll] add_backend: adding backend `teco3'
>> [dll] add_backend: adding backend `u12'
>> [dll] add_backend: adding backend `umax'
>> [dll] add_backend: adding backend `umax1220u'
>> [dll] add_backend: adding backend `v4l'
>> [dll] add_backend: adding backend `xerox_mfp'
>> [dll] sane_open: trying to open `genesys'
>> [dll] load: searching backend `genesys' in
>> `/usr/lib/i386-linux-gnu/sane:/usr/lib/sane'
>> [dll] load: trying to load `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
>> [dll] load: dlopen()ing `/usr/lib/i386-linux-gnu/sane/libsane-genesys.so.1'
>> [dll] init: initializing backend `genesys'
>> [dll] init: backend `genesys' is version 1.0.63
>> [dll] sane_open: open successful
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=0)
>> [dll] sane_control_option(handle=0x898f1b0,option=0,action=0,value=0xbf895628,info=(nil))
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=0)
>> [dll] sane_control_option(handle=0x898f1b0,option=0,action=0,value=0xbf895558,info=(nil))
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=1)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=2)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=3)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=4)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=5)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=6)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=7)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=8)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=9)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=10)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=11)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=12)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=13)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=14)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=15)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=16)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=17)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=18)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=19)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=20)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=21)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=22)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=23)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=24)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=25)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=26)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=27)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=28)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=29)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=30)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=31)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=32)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=33)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=34)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=35)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=36)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=37)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=38)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=39)
>> [dll] sane_get_option_descriptor(handle=0x898f1b0,option=40)
>> [dll] sane_control_option(handle=0x898f1b0,option=10,action=0,value=0x80533f0,info=(nil))
>> [dll] sane_control_option(handle=0x898f1b0,option=8,action=0,value=0xbf89555c,info=(nil))
>> [dll] sane_control_option(handle=0x898f1b0,option=11,action=0,value=0x80533f4,info=(nil))
>> [dll] sane_control_option(handle=0x898f1b0,option=9,action=0,value=0xbf89555c,info=(nil))
>> scanimage: unrecognized option '--brigthness=10'
>> [dll] sane_close(handle=0x898f1b0)
>> [dll] sane_exit: exiting
>> [dll] sane_exit: calling backend `genesys's exit function
>> [dll] sane_exit: finished
>>
>>
>>
>> Felipe García Martínez
>>
>> --
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>> to sane-devel-request at lists.alioth.debian.org
>
>
>
> --
> "The truth is an offense, but not a sin"
More information about the sane-devel
mailing list