[sane-devel] Canon Pixma MX375 problem
dreamos82 at yahoo.it
Thu Dec 27 22:26:10 UTC 2012
i'm trying configure the Pixma MX375 scanner on gentoo, i followed steps done by Daniel on a previous post (here: http://lists.alioth.debian.org/pipermail/sane-devel/2012-August/030229.html)
I installed sane-backends 1.0.23 with (compiled with sane_backends_pixma use flag enabled) and activated debug mode.
Then sane-find-scanner seems to find the scanner:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04a9 [Canon], product=0x1759 [MX370 series]) at libusb:002:005
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
But any other command that try to access the scanner receive the following error:
root ~#scanimage > test.pnm
scanimage: open of device pixma:04A91759_72024A failed: Operation not supported
More information about the sane-devel