[sane-devel] Canon Pixma MX375 problem

[Ivan G.]

Hi rolf, 

i lookedd at README.linux, but i cannot find where it can help me. 
Since:
1. i installed it using gentoo package manager
2. the scanner is recognized by sane, but i get the error:
          scanimage: open of device pixma:04A91759_72024A failed: Operation not supported
3. The usb flag is set for sane package. 

Or maybe i missed the point with the solution in README.linux? 

Any other idea? 

Cheers, 
Ivan



----- Messaggio originale -----
Da: Rolf Bensch <webmaster at bensch-online.de>
A: Ivan Ivello <dreamos82 at yahoo.it>
Cc: "sane-devel at lists.alioth.debian.org" <sane-devel at lists.alioth.debian.org>
Inviato: Venerdì 28 Dicembre 2012 14:40
Oggetto: Re: [sane-devel] Canon Pixma MX375 problem

Hi Ivan,

Please follow the installation description in README.linux.

Cheers,
Rolf


Am 27.12.2012 23:26, schrieb Ivan Ivello:
> Hi all, 
> 
> i'm trying configure the Pixma MX375 scanner on gentoo, i followed steps done by Daniel on a previous post (here: http://lists.alioth.debian.org/pipermail/sane-devel/2012-August/030229.html) 
> 
> I installed sane-backends 1.0.23 with (compiled with  sane_backends_pixma use flag enabled) and activated debug mode. 
> 
> Then sane-find-scanner seems to find the scanner:
>  
>   # sane-find-scanner will now attempt to detect your scanner. If the
>   # result is different from what you expected, first make sure your
>   # scanner is powered up and properly connected to your computer.
> 
>   # No SCSI scanners found. If you expected something different, make sure that
>   # you have loaded a kernel SCSI driver for your SCSI adapter.
> 
> found USB scanner (vendor=04a9 [Canon], product=0x1759 [MX370 series]) at libusb:002:005
>   # Your USB scanner was (probably) detected. It may or may not be supported by
>   # SANE. Try scanimage -L and read the backend's manpage.
> 
>   # Not checking for parallel port scanners.
> 
>   # Most Scanners connected to the parallel port or other proprietary ports
> 
> But any other command that try to access the scanner receive the following error: 
> 
> 
> root ~#scanimage > test.pnm
> scanimage: open of device pixma:04A91759_72024A failed: Operation not supported
> 
> Any idea?
> 
> Regards,
> Ivan
> 
>