[sane-devel] genesys Canoscan 5600F

Stef stef.dev at free.fr
Mon Jan 16 19:58:38 UTC 2012


Le lundi 16 janvier 2012 16:30:40 vous avez écrit :
> My Canoscan 5600F don't work (sorry for my english)
> 
> This is some informations from terminal:
> :~$ scanimage -V
> 
> scanimage (sane-backends) 1.0.23git; backend version 1.0.23
> 
> :~$ sane-find-scanner
> 
>    # sane-find-scanner will now attempt to detect your scanner. If the
>    # result is different from what you expected, first make sure your
>    # scanner is powered up and properly connected to your computer.
> 
>    # No SCSI scanners found. If you expected something different, make
> sure that
>    # you have loaded a kernel SCSI driver for your SCSI adapter.
> 
> found USB scanner (vendor=0x04a9 [Canon], product=0x1906 [CanoScan],
> chip=GL847) at libusb:001:008
>    # Your USB scanner was (probably) detected. It may or may not be
> supported by
>    # SANE. Try scanimage -L and read the backend's manpage.
> 
>    # Not checking for parallel port scanners.
> 
>    # Most Scanners connected to the parallel port or other proprietary ports
> # can't be detected by this program.
> 
>    # You may want to run this program as root to find all devices. Once you
>    # found the scanner devices, be sure to adjust access permissions as
>    # necessary.
> 
> :~$ sudo scanimage -L
> 
> device `genesys:libusb:001:008' is a Canon 5600F flatbed scanner
> 
> :~$ scanimage -T
> 
> [genesys] WARNING: Your scanner is not fully supported or at least
> [genesys]          had only limited testing. Please be careful and
> [genesys]          report any failure/success to
> [genesys]          sane-devel at lists.alioth.debian.org. Please provide as
> many
> [genesys]          details as possible, e.g. the exact name of your
> [genesys]          scanner and what does (not) work.
> 
> 
> when i try to acquire images from xsane the program say that there is a
> problem of 0/1
> 
> Thats all.
> Fabio

	Hello,
	
	unfortunately, this is the expected result. There isn't support yet for 
this scanner in the genesys backend.  

Regards,
	Stef



More information about the sane-devel mailing list