[sane-devel] scanner installing problem

[henk]

I use suse linux 12.1 and use a HP  6100C scanner, the scanner used to 
work fine but stopped suddenly
I don't no what the problem is and ask for help, me terminal says:


linux-wism:/home/henk # sane-find-scanner

   # sane-find-scanner will now attempt to detect your scanner. If the
   # result is different from what you expected, first make sure your
   # scanner is powered up and properly connected to your computer.

found SCSI processor "HP C2520A 3644" at /dev/sg3
   # Your SCSI scanner was detected. It may or may not be supported by 
SANE. Try
   # scanimage -L and read the backend's manpage.

found USB scanner (vendor=0x0b3b [ZyDAS], product=0x5630 [USB2.0 WLAN]) 
at libusb:001:002
found USB scanner (vendor=0x046d, product=0x0920, chip=ICM532B?) at 
libusb:004:002
   # Your USB scanner was (probably) detected. It may or may not be 
supported by
   # SANE. Try scanimage -L and read the backend's manpage.

   # Not checking for parallel port scanners.

   # Most Scanners connected to the parallel port or other proprietary ports
   # can't be detected by this program.

linux-wism:/home/henk # scanimage -L
device `hp:/dev/sg3' is a Hewlett-Packard C2520A flatbed scanner
linux-wism:/home/henk #