[sane-devel] ScanSnap S1100 fails with out of memory

[m. allan noah]

There is a way to get this scanner working, read this archived post:

http://lists.alioth.debian.org/pipermail/sane-devel/2011-December/029340.html

allan

On Sat, Jun 9, 2012 at 3:16 PM, Per Dalgas Jakobsen <pdj at knaldgas.dk> wrote:
> Hi
>
> I'm trying to get a Fujitsu ScanSnap S1100 to work on my Debian Wheezy.
>
> Running "scanimage >test.pnm" results in "Out of memory" error.
>
> # SANE_DEBUG_SNAPSCAN=255 scanimage 2>debug.log >test.pnm
> ---
> [sanei_debug] Setting debug level of snapscan to 255.
> [snapscan] sane_snapscan_init
> [snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
> [snapscan] sane_snapscan_get_devices (0x7fff558d43b8, 0)
> scanimage: sane_start: Out of memory
> [snapscan] sane_snapscan_exit
> ---
>
> # SANE_DEBUG_SANEI_USB=255 scanimage 2>debug.log >test.pnm
> ---
> ...
> [sanei_usb] sanei_usb_open: trying to open device `libusb:001:003'
> [sanei_usb] sanei_usb_open: configuration nr: 0
> [sanei_usb] sanei_usb_open:     interface nr: 0
> [sanei_usb] sanei_usb_open:   alt_setting nr: 0
> [sanei_usb] sanei_usb_open: endpoint nr: 0
> [sanei_usb] sanei_usb_open: direction: 128
> [sanei_usb] sanei_usb_open: address: 1 transfertype: 2
> [sanei_usb] sanei_usb_open: found bulk-in endpoint (address 0x01)
> [sanei_usb] sanei_usb_open: we already have a bulk-in endpoint (address:
> 0x81), ignoring the new one
> [sanei_usb] sanei_usb_open: endpoint nr: 1
> [sanei_usb] sanei_usb_open: direction: 0
> [sanei_usb] sanei_usb_open: address: 2 transfertype: 2
> [sanei_usb] sanei_usb_open: found bulk-out endpoint (address 0x02)
> [sanei_usb] sanei_usb_open: we already have a bulk-out endpoint (address:
> 0x02), ignoring the new one
> [sanei_usb] sanei_usb_open: opened usb device `libusb:001:003' (*dn=0)
> scanimage: sane_start: Out of memory
> [sanei_usb] sanei_usb_write_bulk: trying to write 2 bytes
> [sanei_usb] 000 1B D0                                           ..
> [sanei_usb] sanei_usb_write_bulk: wanted 2 bytes, wrote 2 bytes
> [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes
> [sanei_usb] 000 06                                              .
> [sanei_usb] sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes
> [sanei_usb] sanei_usb_write_bulk: trying to write 1 bytes
> [sanei_usb] 000 00                                              .
> [sanei_usb] sanei_usb_write_bulk: wanted 1 bytes, wrote 1 bytes
> [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes
> [sanei_usb] 000 06                                              .
> [sanei_usb] sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes
> [sanei_usb] sanei_usb_close: closing device 0
> ---
>
> Any ideas of what may be wrong here, or rather, how to fix it :)
>
> # scanimage -V
> scanimage (sane-backends) 1.0.22; backend version 1.0.22
>
> ~Per
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>            to sane-devel-request at lists.alioth.debian.org



-- 
"The truth is an offense, but not a sin"