[sane-devel] SANE Canon DR-3010C issues
m. allan noah
kitno455 at gmail.com
Tue Oct 2 12:24:48 UTC 2012
Try sending scanimage output to files:
SANE_DEBUG_CANON_DR=35 scanimage > 3010.pnm &2>3010.log
then send me 3010.log
allan
On Tue, Oct 2, 2012 at 7:37 AM, sander drost <sander-drost at hotmail.com> wrote:
> Hello,
>
> I've been trying to get the DR-3010C to work under ubuntu LTS 12.04 64bit.
> This scanner is listed as not yet tested so i've tested it you could say. i
> haven't had any succes as of yet. Not been able to make a single scan.
> I tried installing the canon_dr backend from source. i tried to make it
> look like the working DR scanners. Nothing works. It recognizes the scanner
> as the DR-3010C as it is but a scan gives "error during device I/O". I tried
> most of the given solutions i get from googeling this error.
>
> If i look at the log it seems the do_usb_cmd: start does not trigger the
> scanner. i dont know if i can send a file with this email so i will just
> paste the log file under this email.
>
> Am i doing something wrong maybe? Or can i help out anywhere since i have
> this printer?
>
> Thanks in advanced. Sincerely, Sander Drost
>
> the log file :
>
> [sanei_debug] Setting debug level of canon_dr to 255.
> [canon_dr] sane_init: start
> [canon_dr] sane_init: canon_dr backend 1.0.37, from sane-backends 1.0.22
> [canon_dr] sane_init: finish
> [canon_dr] sane_open: start
> [canon_dr] sane_open: no scanners currently attached, attaching
> [canon_dr] sane_get_devices: start
> [canon_dr] sane_get_devices: reading config file canon_dr.conf
> [canon_dr] sane_get_devices: looking for 'scsi CANON CR'
> [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
> [canon_dr] sane_get_devices: setting "vendor-name" to CANON
> [canon_dr] sane_get_devices: setting "model-name" to DR-2080C
> [canon_dr] sane_get_devices: setting "version-name" to XXXX
> [canon_dr] sane_get_devices: setting "padded-read" to 1
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1601'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1602'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1603'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1604'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1606'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1607'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1608'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1609'
> [canon_dr] sane_get_devices: setting "vendor-name" to CANON
> [canon_dr] sane_get_devices: setting "model-name" to DR-2050C
> [canon_dr] sane_get_devices: setting "version-name" to XXXX
> [canon_dr] sane_get_devices: setting "padded-read" to 1
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160a'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160b'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160c'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160f'
> [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x2222'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1614'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1617'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1618'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161a'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161b'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161d'
> [canon_dr] attach_one: start
> [canon_dr] attach_one: looking for 'libusb:005:008'
> [canon_dr] connect_fd: start
> [canon_dr] connect_fd: opening USB device
> [canon_dr] wait_scanner: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 500
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
> ................
> [canon_dr] 010: 00 00 00 00 00 00 00 00 ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 500
> [canon_dr] stat: read 0 bytes, retval 9
> [canon_dr] stat: <<
> [canon_dr]
> [canon_dr] stat: clearing error 'Error during device I/O'
> [canon_dr] do_usb_clear: start
> [canon_dr] do_usb_clear: clear halt
> [canon_dr] do_usb_clear: finish with io error
> [canon_dr] stat: bad RS status, 9
> [canon_dr] WARNING: Brain-dead scanner. Hitting with stick
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 500
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
> ................
> [canon_dr] 010: 00 00 00 00 00 00 00 00 ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 500
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00 ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] wait_scanner: finish
> [canon_dr] connect_fd: finish
> [canon_dr] init_inquire: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 30000
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 12 00 00 00
> ................
> [canon_dr] 010: 30 00 00 00 00 00 00 00 0.......
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] in: reading 48 bytes, timeout 30000
> [canon_dr] in: read 48 bytes, retval 0
> [canon_dr] in: <<
> [canon_dr] 000: 06 00 02 02 3b 00 00 10 43 41 4e 4f 4e 20 20 20
> ....;...CANON
> [canon_dr] 010: 44 52 2d 33 30 31 30 43 20 20 20 20 20 20 20 20 DR-3010C
> [canon_dr] 020: 32 2e 30 31 00 00 00 00 32 30 31 30 30 36 32 34
> 2.01....20100624
> [canon_dr] stat: reading 4 bytes, timeout 30000
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00 ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] init_inquire: Found CANON scanner DR-3010C version 2.01 at
> libusb:005:008
> [canon_dr] init_inquire: finish
> [canon_dr] init_vpd: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 30000
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 12 01 f0 00
> ................
> [canon_dr] 010: 1e 00 00 00 00 00 00 00 ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] in: reading 30 bytes, timeout 30000
> [canon_dr] in: read 30 bytes, retval 0
> [canon_dr] in: <<
> [canon_dr] 000: 06 f0 02 00 2b 02 58 02 58 00 02 58 02 58 00 64
> ....+.X.X..X.X.d
> [canon_dr] 010: 00 64 29 d4 00 00 15 f0 00 00 20 d0 18 00 .d).......
> ...
> [canon_dr] stat: reading 4 bytes, timeout 30000
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00 ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] init_vpd: length=2b
> [canon_dr] standard options
> [canon_dr] basic x res: 600 dpi
> [canon_dr] basic y res: 600 dpi
> [canon_dr] step x res: 0 dpi
> [canon_dr] step y res: 0 dpi
> [canon_dr] max x res: 600 dpi
> [canon_dr] max y res: 600 dpi
> [canon_dr] min x res: 100 dpi
> [canon_dr] min y res: 100 dpi
> [canon_dr] 60 dpi: 0
> [canon_dr] 75 dpi: 0
> [canon_dr] 100 dpi: 1
> [canon_dr] 120 dpi: 0
> [canon_dr] 150 dpi: 1
> [canon_dr] 160 dpi: 0
> [canon_dr] 180 dpi: 0
> [canon_dr] 200 dpi: 1
> [canon_dr] 240 dpi: 1
> [canon_dr] 300 dpi: 1
> [canon_dr] 320 dpi: 0
> [canon_dr] 400 dpi: 1
> [canon_dr] 480 dpi: 0
> [canon_dr] 600 dpi: 1
> [canon_dr] 800 dpi: 0
> [canon_dr] 1200 dpi: 0
> [canon_dr] max width: 11232 (9.36 in)
> [canon_dr] max length: 16800 (14.00 in)
> [canon_dr] AWD: 0
> [canon_dr] CE Emphasis: 0
> [canon_dr] C Emphasis: 0
> [canon_dr] High quality: 1
> [canon_dr] grayscale: 1
> [canon_dr] halftone: 0
> [canon_dr] monochrome: 0
> [canon_dr] overflow: 0
> [canon_dr] init_vpd: finish
> [canon_dr] init_model: start
> [canon_dr] init_model: finish
> [canon_dr] init_panel: start
> [canon_dr] read_panel: start
> [canon_dr] read_panel: finish 0
> [canon_dr] send_panel: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 30000
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 2a 00 84 00
> ............*...
> [canon_dr] 010: 00 00 00 00 08 00 00 00 ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] out: writing 20 bytes, timeout 30000
> [canon_dr] out: >>
> [canon_dr] 000: 00 00 00 10 00 02 b0 00 00 00 00 00 00 00 01 00
> ................
> [canon_dr] 010: 00 00 00 00 ....
> [canon_dr] out: wrote 20 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 30000
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00 ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] send_panel: finish 0
> [canon_dr] init_panel: finish
> [canon_dr] init_user: start
> [canon_dr] init_user: finish
> [canon_dr] init_options: start
> [canon_dr] init_options: finish
> [canon_dr] disconnect_fd: start
> [canon_dr] disconnecting usb device
> [canon_dr] disconnect_fd: finish
> [canon_dr] attach_one: finish
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1620'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1622'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1623'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1624'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1626'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x162b'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1638'
> [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1639'
> [canon_dr] sane_get_devices: found scanner libusb:005:008
> [canon_dr] sane_get_devices: found 1 scanner(s)
> [canon_dr] sane_get_devices: finish
> [canon_dr] sane_open: device libusb:005:008 requested
> [canon_dr] sane_open: device libusb:005:008 found
> [canon_dr] connect_fd: start
> [canon_dr] connect_fd: opening USB device
> [canon_dr] wait_scanner: start
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 500
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
> ................
> [canon_dr] 010: 00 00 00 00 00 00 00 00 ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 500
> [canon_dr] stat: read 0 bytes, retval 9
> [canon_dr] stat: <<
> [canon_dr]
> [canon_dr] stat: clearing error 'Error during device I/O'
> [canon_dr] do_usb_clear: start
> [canon_dr] do_usb_clear: clear halt
> [canon_dr] do_usb_clear: finish with io error
> [canon_dr] stat: bad RS status, 9
> [canon_dr] WARNING: Brain-dead scanner. Hitting with stick
> [canon_dr] do_usb_cmd: start
> [canon_dr] cmd: writing 24 bytes, timeout 500
> [canon_dr] cmd: >>
> [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00
> ................
> [canon_dr] 010: 00 00 00 00 00 00 00 00 ........
> [canon_dr] cmd: wrote 24 bytes, retVal 0
> [canon_dr] stat: reading 4 bytes, timeout 500
> [canon_dr] stat: read 4 bytes, retval 0
> [canon_dr] stat: <<
> [canon_dr] 000: 00 00 00 00 ....
> [canon_dr] do_usb_cmd: finish
> [canon_dr] wait_scanner: finish
> [canon_dr] connect_fd: finish
> [canon_dr] sane_open: finish
> [canon_dr] sane_get_option_descriptor: 0
> [canon_dr] sane_control_option: get value for '' (0)
> [canon_dr] sane_get_option_descriptor: 0
> [canon_dr] sane_control_option: get value for '' (0)
> [canon_dr] sane_get_option_descriptor: 1
> [canon_dr] sane_get_option_descriptor: 2
> [canon_dr] sane_get_option_descriptor: 3
> [canon_dr] sane_get_option_descriptor: 4
> [canon_dr] sane_get_option_descriptor: 5
> [canon_dr] sane_get_option_descriptor: 6
> [canon_dr] sane_get_option_descriptor: 7
> [canon_dr] sane_get_option_descriptor: 8
> [canon_dr] sane_get_option_descriptor: 9
> [canon_dr] sane_get_option_descriptor: 10
> [canon_dr] sane_get_option_descriptor: 11
> [canon_dr] sane_get_option_descriptor: 12
> [canon_dr] sane_get_option_descriptor: 13
> [canon_dr] sane_get_option_descriptor: 14
> [canon_dr] sane_get_option_descriptor: 15
> [canon_dr] sane_get_option_descriptor: 16
> [canon_dr] sane_get_option_descriptor: 17
> [canon_dr] sane_get_option_descriptor: 18
> [canon_dr] sane_get_option_descriptor: 19
> [canon_dr] sane_get_option_descriptor: 20
> [canon_dr] sane_get_option_descriptor: 21
> [canon_dr] sane_get_option_descriptor: 22
> [canon_dr] sane_get_option_descriptor: 23
> [canon_dr] sane_get_option_descriptor: 24
> [canon_dr] sane_get_option_descriptor: 25
> [canon_dr] sane_get_option_descriptor: 26
> [canon_dr] sane_get_option_descriptor: 27
> [canon_dr] sane_get_option_descriptor: 28
> [canon_dr] sane_get_option_descriptor: 29
> [canon_dr] sane_get_option_descriptor: 30
> [canon_dr] sane_get_option_descriptor: 31
> [canon_dr] sane_get_option_descriptor: 32
> [canon_dr] sane_get_option_descriptor: 33
> [canon_dr] sane_get_option_descriptor: 34
> [canon_dr] sane_get_option_descriptor: 35
> [canon_dr] sane_get_option_descriptor: 36
> [canon_dr] sane_get_option_descriptor: 37
> [canon_dr] sane_get_option_descriptor: 38
> [canon_dr] sane_control_option: get value for 'br-x' (8)
> [canon_dr] sane_control_option: get value for 'tl-x' (6)
> [canon_dr] sane_control_option: get value for 'br-y' (9)
> [canon_dr] sane_control_option: get value for 'tl-y' (7)
> [canon_dr] sane_control_option: get value for 'tl-x' (6)
> [canon_dr] sane_get_option_descriptor: 8
> [canon_dr] sane_control_option: set value for 'br-x' (8)
> [canon_dr] sane_control_option: get value for 'tl-y' (7)
> [canon_dr] sane_get_option_descriptor: 9
> [canon_dr] sane_control_option: set value for 'br-y' (9)
> scanimage: output is not a file, exiting
> [canon_dr] sane_close: start
> [canon_dr] disconnect_fd: start
> [canon_dr] disconnecting usb device
> [canon_dr] disconnect_fd: finish
> [canon_dr] image_buffers: start
> [canon_dr] image_buffers: finish
> [canon_dr] offset_buffers: start
> [canon_dr] offset_buffers: finish
> [canon_dr] gain_buffers: start
> [canon_dr] gain_buffers: finish
> [canon_dr] sane_close: finish
> [canon_dr] sane_exit: start
> [canon_dr] disconnect_fd: start
> [canon_dr] disconnect_fd: finish
> [canon_dr] sane_exit: finish
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
> to sane-devel-request at lists.alioth.debian.org
--
"The truth is an offense, but not a sin"
More information about the sane-devel
mailing list