[sane-devel] Reflecta ProScan / Crystalscan 7200 PIE film scanner update

[Vleeshouwers, J.M.]

Klaus, Michael,

It's complete, see below.
The differences with the two other scanners are limited:
* I see you have got a square scan area - which make sense
* It has an additinal bit set in options (bit 2)
* Differences in maximum shadow, x0, y0, x1, y1
* Same firmware author but your device is flash
* Model number: 58

Yours,

Jan


0000 06 deviceType: scanner
0001 00 specification0: not removable, no modifications
0002 02 specification0: SCSI-2 compatible
0003 01 specification2: compatibility with some products that were designed prior to the development of this standard
0004 B4 additional length: 180
0005 00 00 00 reserved
0008 50 49 45 20 20 20 20 20 vendorId: 'PIE     '
0016 4D 53 20 53 63 61 6E 6E 65 72 00 00 00 00 00 00 productId: 'MS Scanner'
0032 31 2E 30 30 product revision: '1.00'
0036 88 13 max resolution x: 5000
0038 88 13 max resolution y: 5000
0040 18 1D max scanwidth: 7448 (1.49 inch)
0042 D5 1C max scan height: 7381 (1.48 inch)
0044 9E filters: 10011110 = OnePassColor, I, B, G, R
0045 35 color depths: 00110101 = 16, 12, 8, 1
0046 07 color format: 00000111 = Index, Line, Pixel
0047 00 reserved
0048 09 image format: 00001001 = OKLine, Intel
0049 4B scan capability: 01001011 = ExtCal, DisableCal, 3 cal speeds
0050 65 optional: 01100101 = ?, ?, TransModel1, AutoDocDeeder
0051 02 enhancements: 00000010 = ?
0052 0C gamma bits: ?
0053 00 last filter: ?
0054 2C 01 preview resolution: 300
0055 00 00 00 00 00 00 00 00 reserved
0064 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
0096 31 2E 30 32 firmware version: 1.02
0100 00 halftones: 0
0101 64 minimum highlight: 100
0102 19 maximum shadow: 25
0103 01 calibration equation: 01 meaning ?
0104 C4 09 maximum exposure: 2500
0106 64 00 minimum exposure: 100
0108 E7 03 x0: 999
0110 47 06 y0: 1607
0112 3B 17 x1: 5947
0114 31 1E y1: 7729
0116 3A model: 58
0117 00 00 00 unknown
0120 50 49 45 00 32 30 31 31 production: 'PIE.2011/06/08 11:30AM'
0128 2F 30 36 2F 30 38 20 31 31 3A 33 30 41 4D 00 00 
0144 46 6C 61 73 68 20 52 4F 4D 20 32 39 45 45 35 31 signature: 'Flash ROM 29EE512 \nBY:Chen Tsung-Yu  '
0160 32 20 0D 0A 42 59 3A 43 68 65 6E 20 54 73 75 6E 
0176 67 2D 59 75 20 20 00 00 64
________________________________________
From: Klaus Kaempf [kkaempf at suse.de]
Sent: Sunday, September 16, 2012 8:43 PM
To: Vleeshouwers, J.M.
Cc: Michael Rickmann; sane-devel at lists.alioth.debian.org
Subject: Re: Reflecta ProScan / Crystalscan 7200 PIE film scanner update

* Vleeshouwers, J.M. <J.M.Vleeshouwers at tue.nl> [Sep 13. 2012 21:32]:
> Klaus,
>
> Please do.
> I'm curious about the model number (byte 116, start counting at 0), but also if there are other differences.
> Can you get the whole INQUIRY block (not just the 128 or so the Windows driver uses)?

Attached (hopefully complete).

Klaus
--
SUSE LINUX Products GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg)
Maxfeldstraße 5, 90409 Nürnberg, Germany