[sane-devel] Error during I/O fujitsu scanner

[m. allan noah]

1. What front-end program are you using?
2. Can you reproduce this problem with scanimage?
3. Is this behaviour new?
4. Are you able to upgrade to a more recent version of sane, or even
better, a git snapshot?

allan

On Wed, Aug 7, 2013 at 8:41 AM, cecilia biolatti <cecibiolatti at gmail.com> wrote:
> Hi:
> I have a problem with the fi-4530Cdj  scanner.
> After scanning repeatedly, I get the error "Error during I / O". if I do not
> set the brightness and contrast settings, I get this error less often.
>
> Generally, fails in these lines:
>
> [fujitsu] set_sleep_mode: start
> [fujitsu] do_usb_cmd: start
> [fujitsu] do_usb_cmd: finish
> [fujitsu] set_sleep_mode: finish
> [fujitsu] send_lut: start
> [fujitsu] send_lut: -20 -40.393701 0 0.250000 -0.500000
> [fujitsu] do_usb_cmd: start
> [fujitsu] do_usb_cmd: finish
> [fujitsu] send_lut: finish
> [fujitsu] send_lut: start
> [fujitsu] send_lut: -20 -49.708483 30 0.365525 -59.648866
> [fujitsu] do_usb_cmd: start
> [fujitsu] out: wrong size 1034/1024
> [fujitsu] send_lut: finish
> [fujitsu] sane_start: start
> [fujitsu] started=0, side=0, source=3
> [fujitsu] update_params: start
> [fujitsu] update_params: x: max=14592, page=14033, gpw=14033, res=200
> [fujitsu] update_params: y: max=40800, page=19845, gph=19845, res=200
> [fujitsu] update_params: area: tlx=0, brx=14033, tly=0, bry=19845
> [fujitsu] update_params: params: ppl=2336, Bpl=292, lines=3306
> [fujitsu] update_params: params: format=0, depth=1, last=1
> [fujitsu] update_params: finish
> [fujitsu] scanner_control: start
> [fujitsu] scanner_control: function 0
> [fujitsu] do_usb_cmd: start
> [fujitsu] cmd: wrong size 31/0
> [fujitsu] scanner_control: error, tries 1, ret 9
> [fujitsu] scanner_control: finish
> [fujitsu] sane_start: ERROR: cannot control adf, ignoring
> [fujitsu] mode_select_auto: start
> [fujitsu] do_usb_cmd: start
> [fujitsu] cmd: wrong size 31/0
> [fujitsu] mode_select_auto: finish
> [fujitsu] sane_start: ERROR: cannot mode_select_auto
> Sane Error: Error during device I/O
>
> I attach the full log.
>
> Configuration:
> Sane-backends Version: 1.0.22
> OS: Gentoo
>
> I await your response.
> Regards!



-- 
"The truth is an offense, but not a sin"