[sane-devel] Imageclass d530
Nate Fuhriman
nfuhriman at utahpreparation.com
Tue Dec 17 17:13:38 UTC 2013
still has issues. pixma.log attached.
--
Nate Fuhriman
Utah Preparation
http://www.utahpreparation.com
cell 801-787-3405
office 888-551-0338
On Tue, Dec 17, 2013 at 12:29:52PM +0100, Rolf Bensch wrote:
> Hi Nate,
>
> Attached is the next patch pixma_imageclass.c.patch2 for
> pixma_imageclass.c. I assume that your scanner is a generation 1 type.
>
> In the meantime I did some work in pixma_imageclass.c. Maybe you need to
> fetch the latest code from git and patch with pixma_imageclass.c.patch2_all.
>
> Please send a new pixma.log if the code is buggy.
>
> Cheers,
> Rolf
>
>
>
> Am 11.12.2013 21:48, schrieb Nate Fuhriman:
> > I got pass the not starting problem. This machine has to be put into
> > "remote scanner" mode at the actual device.
> >
> > When I try to scan now it just hangs on me and the display on the
> > device says "An error has occured" and the following appears in my
> > /var/log/messages. I have also attached the usblyzer html output as
> > requested.
> >
> > Dec 11 13:47:07 r2d2 kernel: [ 661.651208] usb 2-1: usbfs: interface 1
> > claimed by usblp while 'scanimage' sets config #1
> > Dec 11 13:47:15 r2d2 kernel: [ 670.385064] usb 2-1: usbfs: interface 1
> > claimed by usblp while 'scanimage' sets config #1
> > Dec 11 13:47:16 r2d2 kernel: [ 670.913699] usb 2-1: usbfs: interface 1
> > claimed by usblp while 'scanimage' sets config #1
> > Dec 11 13:47:19 r2d2 kernel: [ 674.327016] hub 2-0:1.0: port 1 disabled
> > by hub (EMI?), re-enabling...
> > Dec 11 13:47:19 r2d2 kernel: [ 674.330553] usb 2-1: USB disconnect,
> > device number 2
> > Dec 11 13:47:19 r2d2 kernel: [ 674.341357] usblp0: removed
> > Dec 11 13:47:19 r2d2 colord: device removed: sysfs-Canon_Inc-D530_D560
> > Dec 11 13:47:19 r2d2 systemd[1]: Service printer.target is not needed
> > anymore. Stopping.
> > Dec 11 13:47:19 r2d2 systemd[1]: Stopping Printer.
> > Dec 11 13:47:19 r2d2 systemd[1]: Stopped target Printer.
> > Dec 11 13:47:20 r2d2 kernel: [ 674.559025] usb 2-1: new high-speed USB
> > device number 3 using ehci-pci
> > Dec 11 13:47:20 r2d2 kernel: [ 674.684038] usb 2-1: New USB device
> > found, idVendor=04a9, idProduct=2775
> > Dec 11 13:47:20 r2d2 kernel: [ 674.687474] usb 2-1: New USB device
> > strings: Mfr=1, Product=2, SerialNumber=3
> > Dec 11 13:47:20 r2d2 kernel: [ 674.690815] usb 2-1: Product: D530/D560
> > Dec 11 13:47:20 r2d2 kernel: [ 674.694190] usb 2-1: Manufacturer: Canon
> > Inc
> > Dec 11 13:47:20 r2d2 kernel: [ 674.697478] usb 2-1: SerialNumber:
> > 1131T3600452
> > Dec 11 13:47:20 r2d2 kernel: [ 674.719116] usblp 2-1:1.1: usblp0: USB
> > Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x2775
> > Dec 11 13:47:20 r2d2 mtp-probe: checking bus 2, device 3:
> > "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1"
> > Dec 11 13:47:20 r2d2 mtp-probe: bus: 2, device: 3 was not an MTP device
> > Dec 11 13:47:20 r2d2 colord: Device added: sysfs-Canon_Inc-D530_D560
> > Dec 11 13:47:20 r2d2 systemd[1]: Starting Printer.
> > Dec 11 13:47:20 r2d2 systemd[1]: Reached target Printer.
> > Dec 11 13:47:20 r2d2 systemd[1]: Starting Configure Plugged-In
> > Printer...
> > Dec 11 13:47:20 r2d2 systemd[1]: Started Configure Plugged-In Printer.
> > Dec 11 13:47:21 r2d2 udev-configure-printer: no corresponding CUPS
> > device found
> >
> >
> --- ./pixma_imageclass.c 2013-12-17 11:54:43.000000000 +0100
> +++ ../sane-backends/backend/pixma_imageclass.c 2013-12-17 12:10:15.000000000 +0100
> @@ -413,8 +413,9 @@
> return error;
> if (s->param->source == PIXMA_SOURCE_ADF && !has_paper (s))
> return PIXMA_ENO_PAPER;
> - /* activate only seen for generation 1 scanners */
> - if (mf->generation == 1)
> + /* activate only seen for generation 1 scanners
> + * but not for D530 */
> + if (mf->generation == 1 && s->cfg->pid != D530_PID)
> {
> if (error >= 0)
> error = activate (s, 0);
> @@ -471,8 +472,9 @@
> mf->cb.cmd_header_len = 10;
> mf->cb.cmd_len_field_ofs = 7;
>
> - /* set generation = 2 for new multifunctionals */
> - mf->generation = (s->cfg->pid >= MF8030_PID) ? 2 : 1;
> + /* set generation = 2 for new multifunctionals
> + * except D530 is a generation 1 scanner */
> + mf->generation = (s->cfg->pid >= MF8030_PID && s->cfg->pid != D530_PID) ? 2 : 1;
> PDBG (pixma_dbg (3, "*iclass_open***** This is a generation %d scanner. *****\n", mf->generation));
>
> PDBG (pixma_dbg (3, "Trying to clear the interrupt buffer...\n"));
> --- ./pixma_imageclass.c 2013-12-17 12:24:09.000000000 +0100
> +++ ../sane-backends/backend/pixma_imageclass.c 2013-12-17 12:24:24.000000000 +0100
> @@ -94,6 +94,7 @@
> #define IR1133_PID 0x2742
> #define MF4570_PID 0x275a
> #define MF4800_PID 0x2773
> +#define D530_PID 0x2775
>
>
> enum iclass_state_t
> @@ -412,8 +413,9 @@
> return error;
> if (s->param->source == PIXMA_SOURCE_ADF && !has_paper (s))
> return PIXMA_ENO_PAPER;
> - /* activate only seen for generation 1 scanners */
> - if (mf->generation == 1)
> + /* activate only seen for generation 1 scanners
> + * but not for D530 */
> + if (mf->generation == 1 && s->cfg->pid != D530_PID)
> {
> if (error >= 0)
> error = activate (s, 0);
> @@ -470,8 +472,9 @@
> mf->cb.cmd_header_len = 10;
> mf->cb.cmd_len_field_ofs = 7;
>
> - /* set generation = 2 for new multifunctionals */
> - mf->generation = (s->cfg->pid >= MF8030_PID) ? 2 : 1;
> + /* set generation = 2 for new multifunctionals
> + * except D530 is a generation 1 scanner */
> + mf->generation = (s->cfg->pid >= MF8030_PID && s->cfg->pid != D530_PID) ? 2 : 1;
> PDBG (pixma_dbg (3, "*iclass_open***** This is a generation %d scanner. *****\n", mf->generation));
>
> PDBG (pixma_dbg (3, "Trying to clear the interrupt buffer...\n"));
> @@ -784,5 +787,6 @@
> DEV ("Canon imageCLASS MF4570dw", "MF4570dw", MF4570_PID, 600, 640, 877, 0),
> DEV ("Canon imageRUNNER 1133", "iR1133", IR1133_PID, 600, 637, 877, PIXMA_CAP_ADFDUP),
> DEV ("Canon i-SENSYS MF4800 Series", "MF4800", MF4800_PID, 600, 640, 877, 0),
> + DEV ("Canon imageCLASS D530", "D530", D530_PID, 600, 640, 877, 0),
> DEV (NULL, NULL, 0, 0, 0, 0, 0)
> };
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pixma.log.gz
Type: application/gzip
Size: 474058 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20131217/7b5fd8cb/attachment-0001.bin>
More information about the sane-devel
mailing list