[sane-devel] Problems with Canon MX715

[stephan_t]

Hello,

as this is a older post and nothing new is comming up here, I would like to
give some informations about the MX 715 with sane-1.0.23

If I set the variable I'm getting this output:

[sanei_debug] Setting debug level of pixma to 3.
[pixma] pixma is compiled with pthread support.
[pixma] pixma version 0.17.0
[pixma] pixma_collect_devices() found Canon PIXMA MX710 Series at
libusb:001:004
[pixma] sanei_bjnp_find_devices:
[pixma] eno1 is IPv4 capable, sending broadcast..
[pixma] eno1 is IPv4 capable, sending broadcast..
[pixma] eno1 is IPv4 capable, sending broadcast..
[pixma] eno1 is IPv4 capable, sending broadcast..
[pixma] eno1 is IPv4 capable, sending broadcast..
[pixma] pixma_find_scanners() found 1 devices
[pixma] pixma_collect_devices() found Canon PIXMA MX710 Series at
libusb:001:004
[pixma] sanei_bjnp_find_devices:
[pixma] eno1 is IPv4 capable, sending broadcast..
[pixma] eno1 is IPv4 capable, sending broadcast..
[pixma] eno1 is IPv4 capable, sending broadcast..
[pixma] eno1 is IPv4 capable, sending broadcast..
[pixma] eno1 is IPv4 capable, sending broadcast..
[pixma] WARNING:Experimental backend CAN DAMAGE your hardware!
[pixma] pixma_open(): Canon PIXMA MX710 Series
[pixma] Reader task started
[pixma] Reader task id=140009308874496 (threaded)
[pixma] 
[pixma] pixma_scan(): start
[pixma]   line_size=1914 image_size=1678578 channels=3 depth=8
[pixma]   dpi=75x75 offset=(0,0) dimension=638x877
[pixma]   gamma_table=0x1884b98 source=0
[pixma]   threshold=127 threshold_curve=0
[pixma] WARNING:Timed out in wait_until_ready()
[pixma] Current status: paper=1 cal=0 lamp=0 busy=0
[pixma] pixma_read_image() failed ETIMEDOUT
[pixma] Reader task terminated: ETIMEDOUT
[pixma] read_image():reader task closed the pipe:0 bytes received, 1678578
bytes expected
scanimage: sane_read: Error during device I/O
[pixma] pixma_close(): Canon PIXMA MX710 Series


Hope this helps. If more informations are needed I can provide them.

Regards
Stephan T.



--
View this message in context: http://sane.10972.n7.nabble.com/Problems-with-Canon-MX715-tp5795p17542.html
Sent from the SANE - Dev mailing list archive at Nabble.com.