[sane-devel] Problems with Canon MX715

[Rolf Bensch]

Hi Stephan,

Please create a logfile with 'export SANE_DEBUG_PIXMA=1', 'export
SANE_DEBUG_PIXMA=11' and 'scanimage 2>pixma.log >image.pnm'.

What Distribution (Name + 32/64 bits) are you using?

I also need an usb sniff file from a Windows machine of an approx. 5mm x
5mm area color scan @ 75 dpi using
http://benoit.papillault.free.fr/usbsnoop/.

In the meantime you can install SANE from git as described in
README.linux (http://www.sane-project.org/README.linux). I'll create
some patches for testing.

Cheers,
Rolf



Am 10.05.2013 13:22, schrieb stephan_t:
> Hello,
>
> as this is a older post and nothing new is comming up here, I would like to
> give some informations about the MX 715 with sane-1.0.23
>
> If I set the variable I'm getting this output:
>
> [sanei_debug] Setting debug level of pixma to 3.
> [pixma] pixma is compiled with pthread support.
> [pixma] pixma version 0.17.0
> [pixma] pixma_collect_devices() found Canon PIXMA MX710 Series at
> libusb:001:004
> [pixma] sanei_bjnp_find_devices:
> [pixma] eno1 is IPv4 capable, sending broadcast..
> [pixma] eno1 is IPv4 capable, sending broadcast..
> [pixma] eno1 is IPv4 capable, sending broadcast..
> [pixma] eno1 is IPv4 capable, sending broadcast..
> [pixma] eno1 is IPv4 capable, sending broadcast..
> [pixma] pixma_find_scanners() found 1 devices
> [pixma] pixma_collect_devices() found Canon PIXMA MX710 Series at
> libusb:001:004
> [pixma] sanei_bjnp_find_devices:
> [pixma] eno1 is IPv4 capable, sending broadcast..
> [pixma] eno1 is IPv4 capable, sending broadcast..
> [pixma] eno1 is IPv4 capable, sending broadcast..
> [pixma] eno1 is IPv4 capable, sending broadcast..
> [pixma] eno1 is IPv4 capable, sending broadcast..
> [pixma] WARNING:Experimental backend CAN DAMAGE your hardware!
> [pixma] pixma_open(): Canon PIXMA MX710 Series
> [pixma] Reader task started
> [pixma] Reader task id=140009308874496 (threaded)
> [pixma] 
> [pixma] pixma_scan(): start
> [pixma]   line_size=1914 image_size=1678578 channels=3 depth=8
> [pixma]   dpi=75x75 offset=(0,0) dimension=638x877
> [pixma]   gamma_table=0x1884b98 source=0
> [pixma]   threshold=127 threshold_curve=0
> [pixma] WARNING:Timed out in wait_until_ready()
> [pixma] Current status: paper=1 cal=0 lamp=0 busy=0
> [pixma] pixma_read_image() failed ETIMEDOUT
> [pixma] Reader task terminated: ETIMEDOUT
> [pixma] read_image():reader task closed the pipe:0 bytes received, 1678578
> bytes expected
> scanimage: sane_read: Error during device I/O
> [pixma] pixma_close(): Canon PIXMA MX710 Series
>
>
> Hope this helps. If more informations are needed I can provide them.
>
> Regards
> Stephan T.
>
>
>
> --
> View this message in context: http://sane.10972.n7.nabble.com/Problems-with-Canon-MX715-tp5795p17542.html
> Sent from the SANE - Dev mailing list archive at Nabble.com.
>
>