[sane-devel] Canon Pixma MG5650 (MG5600 series)

m. allan noah kitno455 at gmail.com
Thu Dec 4 01:01:33 UTC 2014


I think you are not running the version you think you are. On my system:

scanimage -V
scanimage (sane-backends) 1.0.25git; backend version 1.0.25

On Wed, Dec 3, 2014 at 6:35 PM, Raphael Kugelmann <raphael.ku at gmx.de> wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hello,
>
> this is my first mail to the Sane devel mailing list, hopefully it's OK,
> to write it here.
>
> I have the mentioned Pixma MG5650 and unfortunately sane does not detect
> it during the standard scan process which is performed by the
> Scan-Application (e.g. skanlite).
>
> I've updated already the sane version to the latest Git version:
>
> scanimage -V
> ++ scanimage (sane-backends) 1.0.25git; backend version 1.0.24
>
> Unfortunately, this has no effect on the result. skanlite is still not
> able to detect the scanner.
> In general, the scanner is detected by the system, lsusb shows this:
> lsusb
> ++ Bus 003 Device 006: ID 04a9:177f Canon, Inc.
>
> But scanimage -L does not detect anything:
> scanimage -L
> ++ No scanners were identified. If you were expecting something different,
> ++ check that the scanner is plugged in, turned on and detected by the
> ++ sane-find-scanner tool (if appropriate). Please read the documentation
> ++ which came with this software (README, FAQ, manpages).
>
> sane-find-scanner is able to identify the scanner and its series number:
> sane-find-scanner
> ++ found USB scanner (vendor=0x04a9 [Canon], product=0x177f [MG5600
> series]) at libusb:003:006
>
> In case you need further information, I can provide it, if you tell me
> what you need and where I can get it from.
>
> Thanks in advance
>
> raph
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1
>
> iQEcBAEBAgAGBQJUf55DAAoJEGlRQBgnsuzectoIAJZwY0+TFjB2iocDBzMyWYSf
> SwM2FhSPfo5I6mpDg0ZA3I/99CJ+0sgGp/IUzMLeLLUV8ZZuCy8D6zZzSHivSd9S
> 0WeRi7t16lf0eEBB2Z9+qRs7aRgtrBDRMl6Qi9uEBTxDDdQNd+ImZQpEdbP6CaQj
> eUwDc4p8mUUaJDw83cMe67RHSA4vvoVn0fh4A9t/8OQeL1HT2RL/f940LJNHxIiP
> fhrJ4savfzDWx3xP52CjppqY50GGBmFFe9LnVKVkCCzOOTGEsNUMdPGtlSMtoYbE
> +rfbsOYMOhRAW8INDEFU8RUzc/S3IRGZKB9uIIQBasnI2aflnLMY80zEY+mFLLQ=
> =ExhD
> -----END PGP SIGNATURE-----
>
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org



-- 
"well, I stand up next to a mountain- and I chop it down with the edge
of my hand"



More information about the sane-devel mailing list