[sane-devel] Brother DCP-J752DW : xsane stops

[Guillaume Rizand]

I installed brscan-skey, result is more or less the same : I get a 36 
octet .pnm file !
Still looking
Guillaume


Le 16/10/2014 08:19, Guillaume Rizand a écrit :
> Hello
>
> - Indeed I installed the Brother drivers, except brscan-skey, I will 
> try this one today.
> - I don't have the Gimp scan module (?).
> - Scanimage is OK :
> [CODE]
> scanimage -L
> device `brother4:net1;dev0' is a Brother SCANNER DCP-J752DW
> device `brother4:bus1;dev3' is a Brother DCP-J752DW USB scanner
> [/CODE]
> - dll.conf is OK
> [CODE]
> cat /etc/sane.d/dll.conf | grep br
> brother4
> [/CODE]
> - 80-libsane.rules contains :
> # Brother DCP-J752DW / added by gui
> ATTRS{idVendor}=="04f9", ATTRS{idProduct}=="02e4", MODE="0660", 
> GROUP="lp", ENV{libsane_matched}="yes"
>
> So I will try brscan-skey.
> Thanks,
>
> Guillaume
>
>
> Le 15/10/2014 21:40, upscope a écrit :
>> On Wednesday, October 15, 2014 09:33:26 AM Guillaume Rizand wrote:
>>> Hi
>>>
>>> I need your help to get my new multifunction printer to work.
>>> I read and tried quite a lot of things but still I can only print.
>>> When I start Xsane, I can select my usb scanner (wifi is the same
>>> problem), then I click "Get preview", I can hear the scanner moving
>>> for 1-2 sec and then the Xsane window just closes by itself (without
>>> any message if I start it from bash).
>>> 2 strange things : I get a partial scan in /tmp of just 128 Ko, I get
>>> this message in /var/log/syslog :
>>> Oct 15 09:05:18 guiport kernel: [   78.888921] usb 1-1.2: usbfs:
>>> interface 2 claimed by usb-storage while 'xsane' sets config #1
>>> Oct 15 09:05:18 guiport kernel: [   78.888925] usb 1-1.2: usbfs:
>>> process 2049 (xsane) did not claim interface 1 before use
>>>
>>> Here is my config :
>>> - Slackware 64 14.1
>>> - kernel 3.14.5
>>> - Sane 1.0.24 + Sane-compat-32
>>> - XSane 0.998 + XSane-compat-32
>>> - BrScan4 0.4.2 (rpm modified into txz for slack)
>>> I modified a few files here and there (copy libs from lib64 to lib,
>>> added my scanner to /lib/udev/rules.d/80-libsane.rules...).
>>>
>>> Thanks for your help
>>>
>>> Guillaume
>> Appears you are using the Brothers drivers? I have a Brothers printer (
>> MFC J6710DW). It works with Gimp scan, and with the brscan-skey mode.
>> But Xsane will not start it. This used to work before the latest xsane
>> updates from openSUSE 13.1.
>>
>> Does scanimage reconize it? Did you
>>
>> [Code]
>>
>> scanimage -L
>> device `brother4:bus3;dev5' is a Brother MFC-J6710DW USB scanner
>>
>> [/Code]
>>
>> also make sure there is an entry at the end of sane.dll.
>> [Code]
>>   /etc/sane.d/dll.conf
>>
>> Mine is:
>> #xerox_mfp
>>
>> brother4 (name of printer)
>>
>> [/Code]
>>
>> Also when I install mine the first time I found the Product ID missing
>> for the printer in /etc/udev/rules.d/55-libsane.rules.
>>
>> I think this is the same as your 80-libsane.rules. My /lib/udev/rules.d
>> does not have the libsane rule in it. This is probably one of the
>> differences between openSUSE and Slackware. I am using the Brscan4
>> stuff.
>>
>> In the next few days I will install this in openSUSE 13.2 RC.
>>
>> Hope this may help you.
>>
>> Russ
>>
>
>