[sane-devel] No scanner found with Scanimage -L

[Wilhelm]

The configuration looks good.

Please send me

1) the log file (with scanbd debug level=7) if started at a service at boot

2) the log file (with scanbd debug level=7) if started later

I assume that for some reason the scanner isn't present at boot time and
the appropriate event when it is later found isn't send or captured.

Please do the following test:

1) start scanbd so that the scanner is found
2) remove scanner
3) scanimage -L should be empty
4) insert scanner
5) scanimage -L should find the scanner again



Am 07.07.2015 um 23:07 schrieb ylafont:
> Here is the current config.  let me know if i missed a file. I believe it is
> scanbd 1.4.2
> 
> */etc/sane.d/sane.conf*
> #scan-client.somedomain.firm
> #192.168.0.1
> #192.168.0.1/29
> #[2001:7a8:185e::42:12]
> #[2001:7a8:185e::42:12]/64
> 192.168.1.0/24
> 
> */etc/sane.d/net.config*
> # This is the net backend config file.
> 
> ## net backend options
> # Timeout for the initial connection to saned. This will prevent the backend
> # from blocking for several minutes trying to connect to an unresponsive
> # saned host (network outage, host down, ...). Value in seconds.
> # connect_timeout = 60
> connect_timeout = 3
> 
> ## saned hosts
> # Each line names a host to attach to.
> # If you list "localhost" then your backends can be accessed either
> # directly or through the net backend.  Going through the net backend
> # may be necessary to access devices that need special privileges.
> #localhost
> localhost
> 
> */etc/sane.d/dll.conf*
> net
> /etc/default/saned
> # Defaults for the saned initscript, from sane-utils
> # Set to yes to start saned
> RUN=no
> 
> # Set to the user saned should run as
> RUN_AS_USER=saned
> 
> */etc/xinetd.d/sane-port*
> service saned 
> {
> 	port = 6566
> 	socket_type = stream
> 	#server = /usr/sbin/saned
> 	#server = "/usr/local/sbin/scanbm -c /usr/local/etc/scanbd/scanbd.conf"
> 	server = /usr/local/sbin/scanbm
> 	server_args = scanbm -c /usr/local/etc/scanbd/scanbd.conf
> 	protocol = tcp
> 	user = saned
> 	group = scanner
> 	wait = no
> 	disable = no
> }
> 
> 
> */usr/local/etc/sane.d/dll.conf*
> Fujitsu
> 
> */usr/local/etc/sane.d/net.conf*
> File is empty
> 
> 
> 
> 
> --
> View this message in context: http://sane.10972.n7.nabble.com/weird-No-scanner-found-with-Scanimage-L-tp19894p19905.html
> Sent from the SANE - Dev mailing list archive at Nabble.com.
> 


-- 
Wilhelm