[sane-devel] Fujitsu S1300i on RPi

[Gaggl, Leo]

Hi Allan,

Thank you very much for the patch. It's working now.

Much appreciated.

Cheers,
Leo


On 23 March 2015 at 06:51, m. allan noah <kitno455 at gmail.com> wrote:

> Leo- see if the attached patch will help.
>
> allan
>
> On Sat, Mar 21, 2015 at 9:53 PM, Gaggl, Leo <leo at brightcookie.com.au>
> wrote:
> > Hi,
> >
> > I have installed sane on a RaspberryPi Model B
> > http://www.splitbrain.org/blog/2014-08/23-paper_backup_1_scanner_setup
> and
> > followed all steps and the scanner is recognised fine. But when I try to
> use
> > scanimage the document starts feeding but then fails with
> >
> > scanimage: sane_start: Error during device I/O
> >
> > I have been updating firmware as there were some reports that the dwc_otg
> > USB driver had some issues. Did you come across any issues like this ?
> Any
> > pointers would be much appreciated. Here is some more detailed debug
> output
> >
> >
> > [dll] sane_get_devices: found 1 devices
> > [dll] sane_open: trying to open `epjitsu:libusb:001:004'
> > [dll] sane_open: open successful
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=0)
> > [dll]
> >
> sane_control_option(handle=0x1f438c0,option=0,action=0,value=0xbe81e71c,info=(nil))
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=0)
> > [dll]
> >
> sane_control_option(handle=0x1f438c0,option=0,action=0,value=0xbe81c670,info=(nil))
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=1)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=2)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=3)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=4)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=5)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=6)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=7)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=8)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=9)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=10)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=11)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=12)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=13)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=14)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=15)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=16)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=17)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=18)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=19)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=20)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=21)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=22)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=23)
> > [dll] sane_get_option_descriptor(handle=0x1f438c0,option=24)
> > [dll] sane_start(handle=0x1f438c0)
> > scanimage: sane_start: Error during device I/O
> > [dll] sane_cancel(handle=0x1f438c0)
> > [dll] sane_close(handle=0x1f438c0)
> > [dll] sane_exit: exiting
> >
> > Thanks in advance,
> > Leo
> >
> > --
> > sane-devel mailing list: sane-devel at lists.alioth.debian.org
> > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
> > Unsubscribe: Send mail with subject "unsubscribe your_password"
> >              to sane-devel-request at lists.alioth.debian.org
>
>
>
> --
> "well, I stand up next to a mountain- and I chop it down with the edge
> of my hand"
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20150323/4dbd41d4/attachment.html>