[sane-devel] Canon MX870 on armhf Hosts
Louis Lagendijk
louis at fazant.net
Mon May 18 18:07:44 UTC 2015
On Sun, 2015-05-17 at 20:03 +0200, Kai T. Hillmann wrote:
> Hi,
>
> first of all thanks for a great piece of software.
>
> Sorry for posting this additionally to the mailinglist (i posted the
> same before in irc but it seems that this will take a longer time and
> i've no bnc there - and don't want to miss some answers)
>
> I recently tried to use the newest sane versions from git after i
> realized that the adf empty bug should be fixed using Rolf Bench's ppa
> which was working very good on an xubuntu trusty.
>
> After that i wanted to use the same on my cubietruck debian jessy armhf
> host... so i had to compile it myself no problem done and with
>
> scanimage -vL
>
> -> my scanner was found...
>
> but scanimage -T failed with:
>
> "open of device pixma:MX870_mx870 failed: Operation was cancelled"
>
> After a lot of tests (created a new trusty vm and compiled sane manually
> as well to see whether it works there and it worked as expected,
> different recompiles on cubietruck but nothing works) i've found a
> possibility to give out some debug informations - output here:
>
> http://pastebin.com/MTM3L06x
>
> The configuration of the compilation is here:
> http://pastebin.com/9dnU7LVB
>
> Output of scanimage -V : scanimage (sane-backends) 1.0.25git; backend
> version 1.0.25
>
> The uname of the kernel:
>
> Linux myhostname 3.16.0-4-armmp-lpae #1 SMP Debian 3.16.7-ckt9-3~deb8u1
> (2015-04-24) armv7l GNU/Linux
>
> Git-Version of sane:
>
> 980b4f6b065a411faf7eb538b3928bdc3308f2ca
>
> Does anyone have any ideas?
>
ould you try to scan using USB first? The networking code uses the USB
code but adds a network stack to the USB interface. Therefore check
first if the device works over USB. If USB fails get the USB debug
information by setting SANE_DEBUG_PIXMA=11.
If USB works, but network scanning does not, please provide a debugfile
generated with SANE_DEBUG_BJNP=3.
For details see man sane-pixma. If only netowrked scans fail, also check
the firewalling chapter in that man -page.
Kind regards, Louis
More information about the sane-devel
mailing list