[sane-devel] Canon i-Sensys MF211 (pixma, MF210 series)

[János Gerzson]

Hello there,
I try again...

2016-11-08 11:04 GMT+01:00 János Gerzson <gerzsonj at gmail.com>:

> Hello,
>
> I bought the mentioned multi-functional device and try to make it work
> with sane v1.0.25 installed on Debian.
> According to the sane-pixma manpage this model "*may use the same Pixma
> protocol as those listed above, but have not yet been reported to work (or
> not). They are declared in the backend so that they get recognized and
> activated. Feedback in the sane-devel mailing list welcome.*"
>
> Is there any additional information about this particular model?
> Is there any hope that it will be fixed in the near future?
> Is it possible to support this process by financial donation?
>
> Issue details:
>
> I set the file permissions and sane recognized the device but failed to
> get the graphic data when trying to scan. When I start it from xsane the
> scanner head moves and lights but after hangs with a message on the LCD:
> 'interrupted, waiting for remote scanner' and the xsane preview window
> remains blank. It seems that it can't send the scanned data to the computer.
>
> Here are some outputs:
> sane-find-scanner:
> found USB scanner (vendor=0x04a9 [Language Error], product=0x27a9
> [Language Error]) at libusb:002:003
>
> scanimage -L:
> device `pixma:04A927A9_0165OE504DB8' is a CANON Canon i-SENSYS MF210
> Series multi-function peripheral
>
> scanimage -T:
> scanimage: scanning image of size 640x877 pixels at 24 bits/pixel
> scanimage: acquiring RGB frame, 8 bits/sample
> scanimage: reading one scanline, 1920 bytes... PASS
> scanimage: reading one byte... PASS
> scanimage: stepped read, 2 bytes... PASS
> scanimage: stepped read, 4 bytes... PASS
> scanimage: stepped read, 8 bytes... PASS
> scanimage: stepped read, 16 bytes... PASS
> scanimage: stepped read, 32 bytes... PASS
> scanimage: stepped read, 64 bytes... PASS
> scanimage: stepped read, 128 bytes... PASS
> scanimage: stepped read, 256 bytes... PASS
> scanimage: stepped read, 512 bytes... PASS
> scanimage: stepped read, 1024 bytes... PASS
> scanimage: stepped read, 2048 bytes... PASS
> scanimage: stepped read, 2047 bytes... PASS
> scanimage: stepped read, 1023 bytes... PASS
> scanimage: stepped read, 511 bytes... PASS
> scanimage: stepped read, 255 bytes... PASS
> scanimage: stepped read, 127 bytes... PASS
> scanimage: stepped read, 63 bytes... PASS
> scanimage: stepped read, 31 bytes... PASS
> scanimage: stepped read, 15 bytes... PASS
> scanimage: stepped read, 7 bytes... PASS
> scanimage: stepped read, 3 bytes... PASS
>
> on the device LCD: "Interrupted" and when I press 'close' "waiting for
> remote scanner" (it's my translation because system language has been set
> to Hungarian)
>
> ...for a change there is a full black out.pnm as a result...
>
> Thanks for any feedback.
> Janos Gerzson
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20161201/d5a90484/attachment.html>