[sane-devel] Cannot get hp scanjet 8200 working

[David Niklas]

I hate to be a pest but it's been two weeks, should I send this somewhere
else.

> Hello,
> I bought an hp scanjet 8200 from amazon and I can't get it to work.
> Here is a list of commands run and output lightly edited for brevity.
> Feel free to snip non relevant details.
> Thanks, in advance.
> 
> % scanimage --version
> scanimage (sane-backends) 1.0.24; backend version 1.0.24
> 
> % equery l PACKAGE
> media-gfx/sane-backends-1.0.24-r6
> media-gfx/sane-frontends-1.0.14
> media-gfx/xsane-0.999-r1
> media-gfx/simple-scan-3.18.2
> 
> % uname -a
> Linux ulgy_thing 4.1.15-gentoo-r1-nopreempt-dav2 #1 SMP x86_64 Intel(R)
> Pentium(R) CPU 2117U @ 1.80GHz GenuineIntel GNU/Linux
> 
> % scanimage -v -d avision:libusb:004:029 > aa.pnm
> scanimage: open of device avision:libusb:004:029 failed: Operation not
> supported
> 
> # In system log
> [scanimage] protocol/discovery/mdns.c 122: unable to add to multicast
> group: No such device_
> 
> % sane-find-scanner
> found USB scanner (vendor=0x03f0 [hp], product=0x0b01 [hp scanjet 8200])
> at libusb:004:029
> 
> DEBUG INFO
> avision   == 128
> sanei_usb == 128
> dll          Looked at, but not needed as there was no problem here
> AFAIK.
> 
> 
> ################# DEBUG ~50 lines
> ################################################### [avision] try to
> write src, count: 2. [sanei_usb] sanei_usb_write_bulk: trying to write
> 2 bytes [sanei_usb] 000 00
> 00                                           .. [sanei_usb]
> sanei_usb_write_bulk: wanted 2 bytes, wrote 2 bytes [avision] wrote 2
> bytes [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes
> [sanei_usb] 000
> 00                                              . [sanei_usb]
> sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk
> read) got: 1, status: 0 [avision] adf_reset: write 2 complete.
> [avision] Timeouts: write: 30000, read: 30000, status: 10000
> [avision] try to write cmd, count: 10.
> [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes
> [sanei_usb] 000 28 00 69 00 0A 0D 00 00 04 00
> (.i....... [sanei_usb] sanei_usb_write_bulk: wanted 10 bytes, wrote 10
> bytes [avision] wrote 10 bytes
> [avision] try to read 4 bytes
> [sanei_usb] sanei_usb_read_bulk: trying to read 4 bytes
> [sanei_usb] 000 00 00 02
> 40                                     ...@ [sanei_usb]
> sanei_usb_read_bulk: wanted 4 bytes, got 4 bytes [avision] read 4 bytes
> [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes
> [sanei_usb] 000
> 00                                              . [sanei_usb]
> sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk
> read) got: 1, status: 0 [avision] adf_reset: raw data:
> [avision]   [0] 00000000b   0o   0d  0x
> [avision]   [1] 00000000b   0o   0d  0x
> [avision]   [2] 00000010b   2o   2d  2x
> [avision]   [3] 01000000b 100o  64d 40x
> [avision] get_accessories_info: Waiting while ADF firmware resets...
> [avision] wait_ready: sending TEST_UNIT_READY
> [avision] filling command to have a length of 10, was: 6
> [avision] Timeouts: write: 30000, read: 15000, status: 15000
> [avision] try to write cmd, count: 10.
> [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes
> [sanei_usb] 000 00 00 00 00 00 00 00 00 00
> 00                   .......... [sanei_usb] sanei_usb_write_bulk:
> wanted 10 bytes, wrote 10 bytes [avision] wrote 10 bytes
> [avision] avision_usb_status: timeout 15000, 1 retries
> [avision] ==> (bulk read) going down ...
> [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes
> [sanei_usb] 000
> 00                                              . [sanei_usb]
> sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk
> read) got: 1, status: 0 [avision] get_accessories_info: Maximum retries
> attempted, ADF unresponsive. [avision] sane_open: additional probe
> failed: Operation not supported scanimage: open of device
> avision:libusb:004:029 failed: Operation not supported [avision]
> sane_exit:
> 
> ############### DEBUG 27 lines scanimage -h -d avision:libusb:004:029
> ############### [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes
> [sanei_usb] 000
> 00                                              . [sanei_usb]
> sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk
> read) got: 1, status: 0 [avision] adf_reset: raw data:
> [avision]   [0] 00000000b   0o   0d  0x
> [avision]   [1] 00000000b   0o   0d  0x
> [avision]   [2] 00000010b   2o   2d  2x
> [avision]   [3] 01000000b 100o  64d 40x
> [avision] get_accessories_info: Waiting while ADF firmware resets...
> [avision] wait_ready: sending TEST_UNIT_READY
> [avision] filling command to have a length of 10, was: 6
> [avision] Timeouts: write: 30000, read: 15000, status: 15000
> [avision] try to write cmd, count: 10.
> [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes
> [sanei_usb] 000 00 00 00 00 00 00 00 00 00
> 00                   .......... [sanei_usb] sanei_usb_write_bulk:
> wanted 10 bytes, wrote 10 bytes [avision] wrote 10 bytes
> [avision] avision_usb_status: timeout 15000, 1 retries
> [avision] ==> (bulk read) going down ...
> [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes
> [sanei_usb] 000
> 00                                              . [sanei_usb]
> sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk
> read) got: 1, status: 0 [avision] get_accessories_info: Maximum retries
> attempted, ADF unresponsive. [avision] sane_open: additional probe
> failed: Operation not supported scanimage: open of device
> avision:libusb:004:029 failed: Operation not supported