[sane-devel] Cannot connect to my Fujitsu ScanSnap S1300i: connect_fd: could not open device: 3

Max Westen max at dlmax.org
Mon Dec 4 09:31:06 UTC 2017


Trying to get my installation going.
Running Arch-Linux 4.13.12-1-ARCH on an Apple MacBookPro3,1.

Installed Sane by using sudo pacman -S sane
Installed version is: 1.0.27

A scan for the device gives me the following:
[max at Luminox sane.d]$ sane-find-scanner -q
could not open USB device 0x05ac/0x8502 at 002:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied
(insufficient permissions)
could not open USB device 0x05ac/0x021b at 007:003: Access denied
(insufficient permissions)
could not open USB device 0x05ac/0x8242 at 007:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 007:001: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 006:001: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 005:001: Access denied
(insufficient permissions)
found USB scanner (vendor=0x04c5 [FUJITSU], product=0x128d [ScanSnap
S1300i]) at libusb:001:005
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 004:001: Access denied
(insufficient permissions)
could not open USB device 0x05ac/0x1000 at 003:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied
(insufficient permissions)

I've installed the file 1300i_0D12.nal in /usr/share/sane/epjitsu as per
instructions of man sane-epjitsu and made sure the file
/etc/sane.d/epjitsu.conf has the correct line for the firmware and usb

I commented out all other devices except for net and apjitsu in
/etc/sane.d/dll.conf, to minimise waittime.

when issuing the command scanimage -L it gives me no device.

after doing an export SANE_DEBUG_EPJITSU=30 and thn giving a scanimage -L,
it gives me the following output:

[max at Luminox sane.d]$ scanimage -L
[sanei_debug] Setting debug level of epjitsu to 30.
[epjitsu] sane_init: start
[epjitsu] sane_init: epjitsu backend 1.0.31, from sane-backends 1.0.27
[epjitsu] sane_init: finish
[epjitsu] sane_get_devices: start
[epjitsu] sane_get_devices: reading config file epjitsu.conf
[epjitsu] sane_get_devices: firmware
'/usr/share/sane/epjitsu/1300i_0D12.nal'
[epjitsu] sane_get_devices: looking for 'usb 0x04c5 0x128d'
[epjitsu] attach_one: start 'libusb:001:005'
[epjitsu] attach_one: init struct
[epjitsu] attach_one: connect fd
[epjitsu] connect_fd: start
[epjitsu] connect_fd: opening USB device
[epjitsu] connect_fd: could not open device: 3
[epjitsu] connect_fd: finish
[epjitsu] destroy: start
[epjitsu] teardown_buffers: start
[epjitsu] teardown_buffers: finish
[epjitsu] destroy: finish
[epjitsu] sane_get_devices: found 0 scanner(s)
[epjitsu] sane_get_devices: finish

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[epjitsu] sane_exit: start
[epjitsu] sane_exit: finish


I'm not sure what to do next......
Does anyone have a hint as where to search for a solution ?

Thanks in advance!


Max Westen

Technical blog (EN):   http://DLMax.org
Genealogy site (EN/NL): https://FamWesten.nl / https://History.FamWesten.nl
Persoonlijk blog (NL): http://MaxWesten.nl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20171204/3a775dad/attachment.html>


More information about the sane-devel mailing list