[sane-devel] Reflecta RPS 7200

Julian Hauser julian at julianhauser.com
Sat Jun 3 10:11:03 UTC 2017


Hey Klaus,

Would you be interested in trying to get the scanner to work? Let me
know as I will otherwise get rid of my RPS 7200 and find something that
is supported by sane.

Best,
Julian

On Thu, 01.06.17 16:50, Julian Hauser wrote:
>On Thu, 01.06.17 16:59, Klaus Kaempf wrote:
>>* Julian Hauser <julian at julianhauser.com> [Jun 01. 2017 11:20]:
>
>>>It does seem to fail at a different point now.

>>Yes, indeed

>>>If I look at the logs there does seem to be (though my interpretation
>>>might be totally off) some calibration info coming from the scanner
>>>(starting at around line 8034), but it then fails just after at
>>>"sanei_pieusb_cmd_get_scanned_lines". Any idea what could be the cause
>>>of this?

>>Your scanner needs a (slightly?) different protocol than the other
>>(pieusb-based) Reflecta scanners.

>>Getting this right is a larger operation, involving VirtualBox,
>>Windows (with the original Reflecta driver), USB port forwarding, and
>>a lot of USB debugging.

>>All doable, but might need *a lot* of time.
>
>I would be up for doing the testing etc., if you're interested in trying
>to get this scanner to work. I can set up VirtualBox with the CyberView
>software, which shouldn't be too hard. I've never done USB debugging but
>if you point me in the right direction, I should be able to do it.

>>Klaus



More information about the sane-devel mailing list