[sane-devel] RaspiOS - Scanimage 1.2.1 - esci-driver-problem

[Christoph]

Hi,

I tried to compile the v1.3, but it stop's during configure with an error:

checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
./configure: line 20920: syntax error near unexpected token `noext,'
./configure: line 20920: `AX_CXX_COMPILE_STDCXX_11(noext, optional)'

I started building like this:

./autogen.sh
./configure --prefix=/usr --libdir=/usr/lib/arm-linux-gnueabihf
--sysconfdir=/etc --localstatedir=/var  --enable-avahi

Greetz

Am 30.04.24 um 17:22 schrieb thierryh at vivaldi.net:
> Le 2024-04-30 15:00, Christoph via sane-devel a écrit :
>> Hi,
>>
>> I've just installed a raspi3 with raspiOS32 based on debian bookworm.
>>
>> When I tried to scan with this command: scanimage -d
>> escl:https://192.168.1.121:443 --source "ADF Duplex" --mode Lineart
>> --resolution 300 --progress
>>
>>  --format=png --batch --buffer-size=128
>>
>> come back like this:
>>
>> scanimage: rounded value of resolution from 300 to 300
>> scanimage: rounded value of br-x from 215.9 to 215.9
>> scanimage: rounded value of br-y from 297.18 to 297.18
>> Scanning infinity pages, incrementing by 1, numbering from 1
>> Scanning page 1
>> scanimage: sane_start: Document feeder out of documents
>> Batch terminated, 0 pages scanned
>>
>> Same command with same raspi but older raspios bullseye works as
>> expected, but only with --format=png over all pages in ADF. There was
>> used scanimage v1.0.31
>>
>> I'm using an EPSON XP-7100
>
> Hi,
>
> This is solved, but you need to upgrade to sane-backend 1.3.
>
> Do you know how to build a debian package with the sources?
>
> Thierry
>
>> Greetz, Christoph
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20240430/090c8c11/attachment.htm>