On 2006 20:53:27, Henning Meier-Geinitz wrote:<br>
<br>
> See Deabin's README.debian and SANE's README.linux.<br>
> If adding the user to group "scanner" is not enough, checking if its<br>
> ids are in /etc/hotplug/usb/libsane
<div id="mb_0">> .usermap,<br>> /etc/sane.d/hotplug/libsane.db or in /etc/udev/libsane.rules may help.<br>> The actual file depends on your distribution.<br></div>
<br>
Thank you for the orientaion.<br>
On both computers I simply changed the id in the corresponding line of<br>
/etc/sane.d/hotplug/libsane.db from 0664 to 0660 and it worked fine.<br>
In case of BenQ 5000 it was also necessary to change the product code<br>
from 0x20fc to 0x20f8, acording to the information obtained trough <br>
sane-find-scanner, and to insert the firmware 20F8V115 (and not 20F8V116<br>
as idicated in <a href="http://snapscan.sourceforge.net">snapscan.sourceforge.net</a>) in /etc/sane.d/sanapscan.conf.<br>
Thanks<br>
Gustavo Bayer<br>