user@host:~$ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x03f0 [hp], product=0x0801 [hp scanjet 7400c]) at libusb:002:002-03f0-0801-00-00 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. user@host:~$ scanimage -L [sanei_debug] Setting debug level of avision to 7. [avision] sane_init:(Version: 1.0 Build: 201) [avision] sane_init: parsing config line "" [avision] sane_init: config file line 1: ignoring empty line [avision] sane_init: parsing config line "# This are the possible options. Normally any scanner" [avision] sane_init: config file line 2: ignoring comment line [avision] sane_init: parsing config line "# should work just fine without them - and they are only" [avision] sane_init: config file line 3: ignoring comment line [avision] sane_init: parsing config line "# needed for test and debugging. So if you experience problems" [avision] sane_init: config file line 4: ignoring comment line [avision] sane_init: parsing config line "# and you solve them with enabling options here, please notify" [avision] sane_init: config file line 5: ignoring comment line [avision] sane_init: parsing config line "# the SANE/Avision maintainer: Rene Rebe " [avision] sane_init: config file line 6: ignoring comment line [avision] sane_init: parsing config line "" [avision] sane_init: config file line 7: ignoring empty line [avision] sane_init: parsing config line "#option disable-gamma-table" [avision] sane_init: config file line 8: ignoring comment line [avision] sane_init: parsing config line "#option disable-calibration" [avision] sane_init: config file line 9: ignoring comment line [avision] sane_init: parsing config line "#option force-a4" [avision] sane_init: config file line 10: ignoring comment line [avision] sane_init: parsing config line "" [avision] sane_init: config file line 11: ignoring empty line [avision] sane_init: parsing config line "#scsi AVISION" [avision] sane_init: config file line 12: ignoring comment line [avision] sane_init: parsing config line "#scsi FCPA" [avision] sane_init: config file line 13: ignoring comment line [avision] sane_init: parsing config line "#scsi MINOLTA" [avision] sane_init: config file line 14: ignoring comment line [avision] sane_init: parsing config line "#scsi MITSBISH MCA-S600C" [avision] sane_init: config file line 15: ignoring comment line [avision] sane_init: parsing config line "#scsi MITSBISH MCA-SS600" [avision] sane_init: config file line 16: ignoring comment line [avision] sane_init: parsing config line "#scsi HP" [avision] sane_init: config file line 17: ignoring comment line [avision] sane_init: parsing config line "#scsi hp" [avision] sane_init: config file line 18: ignoring comment line [avision] sane_init: parsing config line "" [avision] sane_init: config file line 19: ignoring empty line [avision] sane_init: parsing config line "#scsi /dev/scanner" [avision] sane_init: config file line 20: ignoring comment line [avision] sane_init: parsing config line "# usb libusb:002:003" [avision] sane_init: config file line 21: ignoring comment line [avision] sane_init: parsing config line "# usb 0x03f0 0x0701" [avision] sane_init: config file line 22: ignoring comment line [avision] sane_init: parsing config line "" [avision] sane_init: config file line 23: ignoring empty line [avision] sane_init: parsing config line "usb 0x03f0 0x0801" [avision] sane_init: config file line 24: trying to attach USB:`usb 0x03f0 0x0801' [avision] attach: [avision] attach: opening libusb:002:002-03f0-0801-00-00 [avision] attach: open failed (Invalid argument) [avision] sane_init: Trying to find USB device 638 a27 ... [avision] sane_init: Trying to find USB device 638 a3c ... [avision] sane_init: Trying to find USB device 638 a33 ... [avision] sane_init: Trying to find USB device 638 a24 ... [avision] sane_init: Trying to find USB device 638 a25 ... [avision] sane_init: Trying to find USB device 638 a3a ... [avision] sane_init: Trying to find USB device 638 a23 ... [avision] sane_init: Trying to find USB device 638 a2a ... [avision] sane_init: Trying to find USB device 638 a2a ... [avision] sane_init: Trying to find USB device 638 a19 ... [avision] sane_init: Trying to find USB device 638 a41 ... [avision] sane_init: Trying to find USB device 638 a16 ... [avision] sane_init: Trying to find USB device 638 a13 ... [avision] sane_init: Trying to find USB device 638 a18 ... [avision] sane_init: Trying to find USB device 638 a66 ... [avision] sane_init: Trying to find USB device 638 a40 ... [avision] sane_init: Trying to find USB device 638 a68 ... [avision] sane_init: Trying to find USB device 638 a61 ... [avision] sane_init: Trying to find USB device 638 a45 ... [avision] sane_init: Trying to find USB device 3f0 701 ... [avision] sane_init: Trying to find USB device 3f0 701 ... [avision] sane_init: Trying to find USB device 3f0 801 ... [avision] attach: [avision] attach: opening libusb:002:002-03f0-0801-00-00 [avision] attach: open failed (Invalid argument) [avision] sane_init: Trying to find USB device 3f0 b01 ... [avision] sane_init: Trying to find USB device 638 26a ... [avision] sane_init: Trying to find USB device 686 4004 ... [avision] sane_init: Trying to find USB device 686 400d ... [avision] sane_init: Trying to find USB device 686 400e ... [avision] sane_init: Trying to find USB device 638 a15 ... [avision] sane_init: Trying to find USB device 638 a16 ... [avision] sane_init: Trying to find USB device 4c5 1029 ... [avision] sane_init: Trying to find USB device 40a 6001 ... [avision] sane_init: Trying to find USB device 40a 6002 ... [avision] sane_init: Trying to find USB device 40a 6003 ... [avision] sane_init: Trying to find USB device 40a 6004 ... [avision] sane_init: Trying to find USB device 40a 6005 ... [avision] sane_init: Trying to find USB device 638 268 ... [avision] sane_init: Trying to find USB device 4a7 449 ... [avision] sane_init: Trying to find USB device 4a7 44c ... [avision] sane_init: Trying to find USB device 4a7 475 ... [avision] sane_get_devices: No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [avision] sane_exit: user@host:~$