[sanei_debug] Setting debug level of umax to 255. [umax] sane_init [umax] This is sane-umax version 1.0 build 45 [umax] compiled with USB support for Astra 2200 [umax] (C) 1997-2002 by Oliver Rauch [umax] EMAIL: Oliver.Rauch@rauch-domain.de [umax] reading configure file umax.conf [umax] sanei_config_attach_matching_devices(scsi UMAX * Scanner) [umax] attach_scanner: <00c9f706c55500004607eb09>, connection_type 1 [umax] attach_scanner: opening scsi device <00c9f706c55500004607eb09> [sanei_debug] Setting debug level of sanei_scsi to 255. [umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer size = 16384 [umax] attach_scanner: allocating SCSI buffer[0] [umax] init [umax] request_scsi_maxqueue = 2 [umax] request_preview_lines = 10 [umax] request_scan_lines = 40 [umax] handle_bad_sense_error = 0 [umax] execute_request_sense = 0 [umax] scsi_buffer_size_min = 32768 [umax] scsi_buffer_size_max = 131072 [umax] force_preview_bit_rgb = 0 [umax] slow = -1 [umax] smear = -1 [umax] calibration_area = -1 [umax] calibration_width_offset = -99999 [umax] calibration_width_offset_batch = -99999 [umax] calibration_bytespp = -1 [umax] exposure_time_rgb_bind = -1 [umax] invert_shading_data = -1 [umax] lamp_control_available = 0 [umax] backend runs on little endian machine [umax] variable scsi buffer size (usage of sanei_scsi_open_extended) [umax] initialize_values [umax] identify_scanner [umax] do_inquiry [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:5 isWrite:0 [sanei_scsi] isRead dst_size:5 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 5 bytes [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:148 isWrite:0 [sanei_scsi] isRead dst_size:148 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 148 bytes [umax] Found UMAX scanner Astra 600S version V1.2 on device <00c9f706c55500004607eb09> [umax] umax_correct_inquiry("UMAX Astra 600S V1.2") [umax] setting up special options for Astra 600S [umax] - correcting wrong inquiry data [umax] do_new_inquiry [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:155 isWrite:0 [sanei_scsi] isRead dst_size:155 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 155 bytes [umax] - activating inversion of shading data [umax] get_inquiry_values [umax] INQUIRY: [umax] ======== [umax] [umax] vendor........................: 'UMAX ' [umax] product.......................: 'Astra 600S ' [umax] version.......................: 'V1.2' [umax] peripheral qualifier..........: 0 [umax] peripheral device type........: 6 [umax] [umax] CBHS value range..............: 0-255 [umax] scanmode......................: flatbed (FB) [umax] inquiry block length..........: 158 bytes [umax] [umax] ISO Version (reserved).......: 0 [umax] ECMA Version (reserved).......: 0 [umax] ANSI Version .................: 2 [umax] [umax] reserved byte 0x05 = 0 [umax] reserved byte 0x06 = 0 [umax] [umax] scsi features (00): [umax] ------------------- [umax] [umax] f/w support function: [umax] --------------------- [umax] - quality calibration [umax] - fast preview function [umax] - calibration mode control by driver [umax] [umax] reserved byte 0x36 = 0 [umax] reserved byte 0x37 = 0 [umax] [umax] scan modes (f6): [umax] ---------------- [umax] - single pass color mode [umax] - lineart mode [umax] - gray mode [umax] - color mode [umax] - transparency (UTA) [umax] - automatic document feeder (ADF) [umax] [umax] scanner capability (94, 01, 00): [umax] -------------------------------- [umax] - bi-level image reverse [umax] - support highlight function [umax] - paper length can reach to 14 inch [umax] - shading data/gain uploadable [umax] [umax] gamma download available [umax] gamma download type 2 [umax] lines of gamma curve: one line (gray), three lines (color) download [umax] gamma input 8 bits/pixel support [umax] gamma output 8 bits/pixel support [umax] [umax] reserved byte 0x65 = 0 [umax] reserved byte 0x67 = 0 [umax] [umax] reserved byte 0x6b = 0 [umax] reserved byte 0x6c = 0 [umax] [umax] color sequence............................: all supported [umax] color ordering support....................: line with CCD distance [umax] [umax] maximum video memory......................: 228 KB [umax] [umax] reserved byte 0x72 = 0 [umax] [umax] optical resolution........................: 300 dpi [umax] maximum x-resolution......................: 300 dpi [umax] maximum y-resolution......................: 600 dpi [umax] [umax] FB (flatbed-mode): [umax] FB maximum scan width.....................: 8.50 inch [umax] FB maximum scan length....................: 14.00 inch [umax] [umax] UTA (transparency-mode): [umax] UTA x-original point......................: 0.00 inch [umax] UTA y-original point......................: 0.00 inch [umax] UTA maximum scan width....................: 8.50 inch [umax] UTA maximum scan length...................: 11.70 inch [umax] [umax] reserved byte 0x82 = 0 [umax] [umax] DOR (double optical resolution-mode): [umax] DOR optical resolution....................: 0 dpi [umax] DOR maximum x-resolution..................: 0 dpi [umax] DOR maximum y-resolution..................: 0 dpi [umax] DOR x-original point......................: 0.00 inch [umax] DOR y-original point......................: 0.00 inch [umax] DOR maximum scan width....................: 0.00 inch [umax] DOR maximum scan length...................: 0.00 inch [umax] [umax] reserved byte 0x8e = 0 [umax] [umax] last calibration lamp density.............: 0 [umax] [umax] reserved byte 0x90 = 0 [umax] [umax] lamp warmup maximum time..................: 0 sec [umax] window descriptor block length............: 82 bytes [umax] no analog gamma function [umax] [umax] reserved byte 0x98 = 0 [umax] reserved byte 0x99 = 0 [umax] [umax] maximum calibration data lines for shading: 66 [umax] fb/uta: color line arrangement mode.......: 32 [umax] adf: color line arrangement mode.......: 0 [umax] CCD line distance.........................: 8 [umax] [umax] reserved byte 0x9e = 0 [umax] [umax] ==================== end of inquiry ==================== [umax] [umax] x_range.max = 215.899994 [umax] y_range.max = 355.599991 [umax] x_dpi_range.max = 300.000000 [umax] y_dpi_range.max = 600.000000 [umax] sanei_config_attach_matching_devices(scsi LinoHell JADE) [sanei_scsi] Search for Vendor: LinoHell Model: JADE [umax] sanei_config_attach_matching_devices(scsi LinoHell Office) [sanei_scsi] Search for Vendor: LinoHell Model: Office [umax] sanei_config_attach_matching_devices(scsi LinoHell Office2) [sanei_scsi] Search for Vendor: LinoHell Model: Office2 [umax] sanei_config_attach_matching_devices(scsi LinoHell SAPHIR2) [sanei_scsi] Search for Vendor: LinoHell Model: SAPHIR2 [umax] sanei_config_attach_matching_devices(scsi LinoHell SAPHIR3) [sanei_scsi] Search for Vendor: LinoHell Model: SAPHIR3 [umax] sanei_config_attach_matching_devices(scsi Linotype SAPHIR4) [sanei_scsi] Search for Vendor: Linotype Model: SAPHIR4 [umax] sanei_config_attach_matching_devices(scsi LinoHell OPAL2) [sanei_scsi] Search for Vendor: LinoHell Model: OPAL2 [umax] sanei_config_attach_matching_devices(scsi HDM LS4H1S) [sanei_scsi] Search for Vendor: HDM Model: LS4H1S [umax] sanei_config_attach_matching_devices(scsi Nikon AX-110) [sanei_scsi] Search for Vendor: Nikon Model: AX-110 [umax] sanei_config_attach_matching_devices(scsi Nikon AX-210) [sanei_scsi] Search for Vendor: Nikon Model: AX-210 [umax] sanei_config_attach_matching_devices(scsi KYE ColorPage-HR5) [sanei_scsi] Search for Vendor: KYE Model: ColorPage-HR5 [umax] sanei_config_attach_matching_devices(scsi EPSON Perfection600) [sanei_scsi] Search for Vendor: EPSON Model: Perfection600 [umax] sanei_config_attach_matching_devices(scsi ESCORT "Galleria 600S") [sanei_scsi] Search for Vendor: ESCORT Model: Galleria 600S [umax] sanei_config_attach_matching_devices(scsi TriGem PowerScanII) [sanei_scsi] Search for Vendor: TriGem Model: PowerScanII [umax] sanei_usb_attach_matching_devices(usb 0x1606 0x0230) [umax] option connection-type = 1 [umax] attach_scanner: /dev/scanner, connection_type 1 [umax] attach_scanner: opening scsi device /dev/scanner [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [umax] ERROR: attach_scanner: opening scsi device /dev/scanner failed [umax] option connection-type = 2 [umax] attach_scanner: /dev/usbscanner, connection_type 2 [umax] attach_scanner: opening usb device /dev/usbscanner [umax] sanei_umaxusb_open: open of `/dev/usbscanner' failed: Invalid argument [umax] ERROR: attach_scanner: opening usb device /dev/usbscanner failed [umax] finished reading configure file [umax] sane_get_devices(local_only = 0) [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:5 isWrite:0 [sanei_scsi] isRead dst_size:5 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 5 bytes [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:148 isWrite:0 [sanei_scsi] isRead dst_size:148 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 148 bytes [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:5 isWrite:0 [sanei_scsi] isRead dst_size:5 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 5 bytes [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:148 isWrite:0 [sanei_scsi] isRead dst_size:148 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 148 bytes [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:96 isWrite:0 [sanei_scsi] isRead dst_size:96 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 96 bytes [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/camera is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [sanei_debug] Setting debug level of sanei_scsi to 255. [sanei_scsi] sanei_scsi_open: device name /dev/scanner is not valid [umax] sane_open [umax] sane_open: devicename=<00c9f706c55500004607eb09> [umax] Using 8 bits for gamma input [umax] init_options [umax] set mode [#2] to Color [umax] get [#0] [umax] get [#0] [umax] sane_get_option_descriptor 0 [umax] sane_get_option_descriptor 1 [umax] sane_get_option_descriptor 2 [umax] sane_get_option_descriptor 3 [umax] sane_get_option_descriptor 4 [umax] sane_get_option_descriptor 5 [umax] sane_get_option_descriptor 6 [umax] sane_get_option_descriptor 7 [umax] sane_get_option_descriptor 8 [umax] sane_get_option_descriptor 9 [umax] sane_get_option_descriptor 10 [umax] sane_get_option_descriptor 11 [umax] get br-x [#11] [umax] sane_get_option_descriptor 12 [umax] get br-y [#12] [umax] sane_get_option_descriptor 13 [umax] sane_get_option_descriptor 14 [umax] sane_get_option_descriptor 15 [umax] sane_get_option_descriptor 16 [umax] sane_get_option_descriptor 17 [umax] sane_get_option_descriptor 18 [umax] sane_get_option_descriptor 19 [umax] sane_get_option_descriptor 20 [umax] sane_get_option_descriptor 21 [umax] sane_get_option_descriptor 22 [umax] sane_get_option_descriptor 23 [umax] sane_get_option_descriptor 24 [umax] sane_get_option_descriptor 25 [umax] sane_get_option_descriptor 26 [umax] sane_get_option_descriptor 27 [umax] sane_get_option_descriptor 28 [umax] sane_get_option_descriptor 29 [umax] sane_get_option_descriptor 30 [umax] sane_get_option_descriptor 31 [umax] sane_get_option_descriptor 32 [umax] sane_get_option_descriptor 33 [umax] sane_get_option_descriptor 34 [umax] sane_get_option_descriptor 35 [umax] sane_get_option_descriptor 36 [umax] sane_get_option_descriptor 37 [umax] sane_get_option_descriptor 38 [umax] sane_get_option_descriptor 39 [umax] sane_get_option_descriptor 40 [umax] sane_get_option_descriptor 41 [umax] sane_get_option_descriptor 42 [umax] sane_get_option_descriptor 43 [umax] sane_get_option_descriptor 44 [umax] sane_get_option_descriptor 45 [umax] sane_get_option_descriptor 46 [umax] sane_get_option_descriptor 47 [umax] sane_get_option_descriptor 48 [umax] sane_get_option_descriptor 49 [umax] sane_get_option_descriptor 50 [umax] sane_get_option_descriptor 51 [umax] sane_get_option_descriptor 52 [umax] sane_get_option_descriptor 53 [umax] sane_get_option_descriptor 54 [umax] sane_get_option_descriptor 55 [umax] sane_get_option_descriptor 56 [umax] sane_get_option_descriptor 57 [umax] sane_get_option_descriptor 58 [umax] sane_get_option_descriptor 59 [umax] sane_get_option_descriptor 60 [umax] sane_get_option_descriptor 61 [umax] sane_get_option_descriptor 62 [umax] sane_get_option_descriptor 63 [umax] sane_get_option_descriptor 64 [umax] sane_get_option_descriptor 65 [umax] sane_get_option_descriptor 66 [umax] sane_get_option_descriptor 67 [umax] get tl-x [#9] [umax] get tl-y [#10] [umax] sane_get_option_descriptor 4 [umax] sane_get_option_descriptor 4 [umax] set resolution [#4] to 100.000000 [umax] sane_get_option_descriptor 2 [umax] sane_get_option_descriptor 2 [umax] set mode [#2] to LineArt [umax] get [#0] [umax] sane_get_option_descriptor 0 [umax] sane_get_option_descriptor 1 [umax] sane_get_option_descriptor 2 [umax] sane_get_option_descriptor 3 [umax] sane_get_option_descriptor 4 [umax] sane_get_option_descriptor 5 [umax] sane_get_option_descriptor 6 [umax] sane_get_option_descriptor 7 [umax] sane_get_option_descriptor 8 [umax] sane_get_option_descriptor 9 [umax] sane_get_option_descriptor 10 [umax] sane_get_option_descriptor 11 [umax] get br-x [#11] [umax] sane_get_option_descriptor 12 [umax] get br-y [#12] [umax] sane_get_option_descriptor 13 [umax] sane_get_option_descriptor 14 [umax] sane_get_option_descriptor 15 [umax] sane_get_option_descriptor 16 [umax] sane_get_option_descriptor 17 [umax] sane_get_option_descriptor 18 [umax] sane_get_option_descriptor 19 [umax] sane_get_option_descriptor 20 [umax] sane_get_option_descriptor 21 [umax] sane_get_option_descriptor 22 [umax] sane_get_option_descriptor 23 [umax] sane_get_option_descriptor 24 [umax] sane_get_option_descriptor 25 [umax] sane_get_option_descriptor 26 [umax] sane_get_option_descriptor 27 [umax] sane_get_option_descriptor 28 [umax] sane_get_option_descriptor 29 [umax] sane_get_option_descriptor 30 [umax] sane_get_option_descriptor 31 [umax] sane_get_option_descriptor 32 [umax] sane_get_option_descriptor 33 [umax] sane_get_option_descriptor 34 [umax] sane_get_option_descriptor 35 [umax] sane_get_option_descriptor 36 [umax] sane_get_option_descriptor 37 [umax] sane_get_option_descriptor 38 [umax] sane_get_option_descriptor 39 [umax] sane_get_option_descriptor 40 [umax] sane_get_option_descriptor 41 [umax] sane_get_option_descriptor 42 [umax] sane_get_option_descriptor 43 [umax] sane_get_option_descriptor 44 [umax] sane_get_option_descriptor 45 [umax] sane_get_option_descriptor 46 [umax] sane_get_option_descriptor 47 [umax] sane_get_option_descriptor 48 [umax] sane_get_option_descriptor 49 [umax] sane_get_option_descriptor 50 [umax] sane_get_option_descriptor 51 [umax] sane_get_option_descriptor 52 [umax] sane_get_option_descriptor 53 [umax] sane_get_option_descriptor 54 [umax] sane_get_option_descriptor 55 [umax] sane_get_option_descriptor 56 [umax] sane_get_option_descriptor 57 [umax] sane_get_option_descriptor 58 [umax] sane_get_option_descriptor 59 [umax] sane_get_option_descriptor 60 [umax] sane_get_option_descriptor 61 [umax] sane_get_option_descriptor 62 [umax] sane_get_option_descriptor 63 [umax] sane_get_option_descriptor 64 [umax] sane_get_option_descriptor 65 [umax] sane_get_option_descriptor 66 [umax] sane_get_option_descriptor 67 [umax] get tl-x [#9] [umax] get tl-y [#10] [umax] get tl-x [#9] [umax] sane_get_option_descriptor 11 [umax] set br-x [#11] to 215.899994 [umax] get tl-y [#10] [umax] sane_get_option_descriptor 12 [umax] set br-y [#12] to 355.599991 [umax] sane_start [umax] initialize_values [umax] Using 8 bits for gamma input [umax] Using 8 bits for output [umax] check_values [umax] sane_get_parameters [umax] x_resolution (dpi) = 100 [umax] y_resolution (dpi) = 100 [umax] x_coordinate_base (dpi) = 1200 [umax] y_coordinate_base (dpi) = 1200 [umax] upper_left_x (xbase) = 0 [umax] upper_left_y (ybase) = 0 [umax] scanwidth (xbase) = 10199 [umax] scanlength (ybase) = 16799 [umax] width in pixels = 848 [umax] length in pixels = 1400 [umax] bits per pixel/color = 8 [umax] bytes per line = 106 [umax] pixels_per_line = 848 [umax] lines = 1400 [umax] negative = 0 [umax] threshold (lineart) = 127 [umax] brightness (halftone) = 127 [umax] contrast (halftone) = 127 [umax] analog_gamma = 0 0 0 [umax] highlight = 255 255 255 [umax] shadow = 0 0 0 [umax] calibrat. exposure time = 0 0 0 [umax] scan exposure time = 0 0 0 [umax] calibration mode number = 0 [umax] batch scan = 0 [umax] batch end = 0 [umax] batch next top left y = 16799 [umax] quality calibration = 1 [umax] warm up = 0 [umax] fast preview function = 0 [umax] DOR = 0 [umax] ADF = 0 [umax] manual focus = 0 [umax] fix focus position = 0 [umax] disable pre focus = 0 [umax] lens cal in doc pos = 0 [umax] holder focus pos 0mm = 0 [sanei_debug] Setting debug level of sanei_scsi to 255. [umax] sane_start: umax_scsi_open_extended returned scsi buffer size = 33920 [umax] sane_start: buffer size has changed, reallocating buffer [umax] sane_start: freeing SCSI buffer[0] [umax] sane_start: allocating SCSI buffer[0] [umax] grab_scanner [umax] wait_scanner [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:0 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 0 bytes [umax] scanner ready [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:0 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 0 bytes [umax] scanner reserved [umax] set_window_param [umax] window descriptor block created with 82 bytes [sanei_scsi] cmd2: cmd_size:10 src_size:90 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:90 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 90 bytes [umax] window(s) set [umax] start_scan [umax] starting scan [sanei_scsi] cmd2: cmd_size:6 src_size:1 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:1 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 1 bytes [umax] do_calibration [umax] wait_scanner [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:0 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 0 bytes [sanei_scsi] taskStatus = 0x00000002 [umax] scanner reports Error during device I/O, waiting ... [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:0 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 0 bytes [sanei_scsi] taskStatus = 0x00000002 [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:0 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 0 bytes [sanei_scsi] taskStatus = 0x00000002 [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:0 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 0 bytes [sanei_scsi] taskStatus = 0x00000002 [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:0 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 0 bytes [sanei_scsi] taskStatus = 0x00000002 [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:0 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 0 bytes [sanei_scsi] taskStatus = 0x00000010 [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:0 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 0 bytes [umax] scanner ready [umax] [umax] reader_process started (as thread) ERROR: sanei_thread_begin failed (Operation timed out) [umax] [umax] reader_process: allocating SCSI buffer[1] trying to release scanner ... [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:0 isWrite:1 [umax] reader_process: starting to READ data [umax] trim_rowbufsize: row_bufsize = 4240 bytes = 40 lines [umax] reading 148400 bytes in blocks of 4240 bytes [umax] wait_scanner [sanei_scsi] cmd2: cmd_size:6 src_size:0 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:0 [sanei_scsi] Executing command [sanei_scsi] Error creating plugin interface (0xe00002be) [umax] scanner reports Error during device I/O, waiting ... [sanei_scsi] ExecuteTaskSync OK Trasferred 0 bytes [umax] scanner released [umax] trying to reposition scanner ... [sanei_scsi] cmd2: cmd_size:10 src_size:0 dst_size:0 isWrite:1 [sanei_scsi] isWrite src_size:0 [sanei_scsi] Executing command [sanei_scsi] ExecuteTaskSync OK Trasferred 0 bytes [umax] not waiting for finishing reposition scanner scanimage: sane_start: Out of memory [umax] sane_cancel Closing device [umax] sane_close Calling sane_exit [umax] sane_exit scanimage: finished