[sanei_debug] Setting debug level of plustek to 255. [plustek] Plustek backend V0.52-9, part of sane-backends 1.0.20 [plustek] Retrieving all supported and conntected devices [plustek] Checking for 0x07b3-0x0010 [plustek] Checking for 0x07b3-0x0011 [plustek] Checking for 0x07b3-0x0013 [plustek] Checking for 0x07b3-0x0017 [plustek] Checking for 0x07b3-0x0015 [plustek] Checking for 0x07b3-0x0015 [plustek] Checking for 0x07b3-0x0017 [plustek] Checking for 0x07b3-0x0013 [plustek] Checking for 0x07b3-0x0011 [plustek] Checking for 0x07b3-0x0010 [plustek] Checking for 0x07b3-0x0014 [plustek] Checking for 0x07b3-0x0014 [plustek] Checking for 0x07b3-0x0016 [plustek] Checking for 0x07b3-0x0017 [plustek] Checking for 0x07b3-0x0017 [plustek] Checking for 0x07b3-0x0007 [plustek] Checking for 0x07b3-0x000f [plustek] Checking for 0x07b3-0x000f [plustek] Checking for 0x07b3-0x0005 [plustek] Checking for 0x07b3-0x0014 [plustek] Checking for 0x07b3-0x0012 [plustek] Checking for 0x0400-0x1000 [plustek] Checking for 0x0400-0x1001 [plustek] Checking for 0x0400-0x1001 [plustek] Checking for 0x0458-0x2007 [plustek] Checking for 0x0458-0x2008 [plustek] Checking for 0x0458-0x2009 [plustek] Checking for 0x0458-0x2013 [plustek] Checking for 0x0458-0x2015 [plustek] Checking for 0x0458-0x2016 [plustek] Checking for 0x03f0-0x0505 [plustek] Checking for 0x03f0-0x0605 [plustek] Checking for 0x04b8-0x010f [plustek] Checking for 0x04b8-0x011d [plustek] Checking for 0x1606-0x0050 [plustek] Checking for 0x1606-0x0060 [plustek] Checking for 0x1606-0x0160 [plustek] Checking for 0x049f-0x001a [plustek] Checking for 0x04a9-0x2206 [plustek] Checking for 0x04a9-0x2207 [plustek] Checking for 0x04a9-0x2208 [plustek] Checking for 0x04a9-0x220d [plustek] Checking for 0x04a9-0x220e [plustek] Checking for 0x04a9-0x2220 [plustek] Checking for 0x0a82-0x4600 [plustek] Checking for 0x0a82-0x6620 [plustek] Checking for 0x04a7-0x0427 [plustek] Checking for 0x0a53-0x1000 [plustek] Available and supported devices: [plustek] Device: >libusb:003:006< - 0x03f0x0x0605 [plustek] ># Plustek-SANE Backend configuration file< [plustek] ># For use with LM9831/2/3 based USB scanners< [plustek] >#< [plustek] >< [plustek] ># each device needs at least two lines:< [plustek] ># - [usb] vendor-ID and product-ID< [plustek] ># - device devicename< [plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device /dev/usbscanner< [plustek] ># or< [plustek] ># device libusb:bbb:ddd< [plustek] ># where bbb is the busnumber and ddd the device number< [plustek] ># make sure that your user has access to /proc/bus/usb/bbb/ddd< [plustek] >#< [plustek] ># additionally you can specify some options< [plustek] ># warmup, lOffOnEnd, lampOff< [plustek] >#< [plustek] ># For autodetection use< [plustek] ># [usb]< [plustek] ># device /dev/usbscanner< [plustek] >#< [plustek] ># or simply< [plustek] ># [usb]< [plustek] >#< [plustek] ># or if you want a specific device but you have no idea about the< [plustek] ># device node or you use libusb, simply set vendor- and product-ID< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device auto< [plustek] >#< [plustek] ># NOTE: autodetection is safe, as it uses the info it got< [plustek] ># from the USB subsystem. If you're not using the< [plustek] ># autodetection, you MUST have attached that device< [plustek] ># at your USB-port, that you have specified...< [plustek] >#< [plustek] >< [plustek] >[usb]< [plustek] next device uses autodetection [plustek] ... next device [plustek] >< [plustek] >#< [plustek] ># options for the previous USB entry< [plustek] >#< [plustek] ># switch lamp off after xxx secs, 0 disables the feature< [plustek] ># (can also be set via frontend)< [plustek] >option lampOff 300< [plustek] Decoding option >lampOff< [plustek] >< [plustek] ># warmup period in seconds, 0 means no warmup, -1 means auto-warmup< [plustek] ># (can also be set via frontend)< [plustek] >option warmup -1< [plustek] Decoding option >warmup< [plustek] >< [plustek] ># 0 means leave lamp-status untouched, not 0 means switch off< [plustek] ># on sane_close< [plustek] ># (can also be set via frontend)< [plustek] >option lOffOnEnd 1< [plustek] Decoding option >lOffOnEnd< [plustek] >< [plustek] >#< [plustek] ># options to tweak the image start-position< [plustek] ># (WARNING: there's no internal range check!!!)< [plustek] >#< [plustek] ># for the normal scan area< [plustek] >#< [plustek] >option posOffX 0< [plustek] Decoding option >posOffX< [plustek] >option posOffY 0< [plustek] Decoding option >posOffY< [plustek] >< [plustek] ># for transparencies< [plustek] >option tpaOffX 0< [plustek] Decoding option >tpaOffX< [plustek] >option tpaOffY 0< [plustek] Decoding option >tpaOffY< [plustek] >< [plustek] ># for negatives< [plustek] >option negOffX 0< [plustek] Decoding option >negOffX< [plustek] >option negOffY 0< [plustek] Decoding option >negOffY< [plustek] >< [plustek] >#< [plustek] ># for setting the calibration strip position< [plustek] ># (WARNING: there's no internal range check!!!)< [plustek] ># -1 means use built in< [plustek] ># (can also be set via frontend)< [plustek] >option posShadingY -1< [plustek] Decoding option >posShadingY< [plustek] >option tpaShadingY -1< [plustek] Decoding option >tpaShadingY< [plustek] >option negShadingY -1< [plustek] Decoding option >negShadingY< [plustek] >< [plustek] >#< [plustek] ># to invert the negatives, 0 disables the feature< [plustek] >#< [plustek] >option invertNegatives 0< [plustek] Decoding option >invertNegatives< [plustek] >< [plustek] >#< [plustek] ># to disable the internal sensor speedup function,< [plustek] ># 1 disables the feature< [plustek] >#< [plustek] >option disableSpeedup 0< [plustek] Decoding option >disableSpeedup< [plustek] >< [plustek] >#< [plustek] ># to save/restore coarse calibration data< [plustek] ># (can also be set via frontend)< [plustek] >option cacheCalData 0< [plustek] Decoding option >cacheCalData< [plustek] >< [plustek] >#< [plustek] ># use alternate calibration routines< [plustek] >#< [plustek] >option altCalibration 0< [plustek] Decoding option >altCalibration< [plustek] >< [plustek] >#< [plustek] ># for skipping whole calibration step< [plustek] >#< [plustek] >option skipCalibration 0< [plustek] Decoding option >skipCalibration< [plustek] >< [plustek] >#< [plustek] ># for skipping entire fine calibration step< [plustek] ># coarse calibration is done< [plustek] >#< [plustek] >option skipFine 0< [plustek] Decoding option >skipFine< [plustek] >< [plustek] >#< [plustek] ># discard the result of the fine white calibration< [plustek] >#< [plustek] >option skipFineWhite 0< [plustek] Decoding option >skipFineWhite< [plustek] >< [plustek] >#< [plustek] ># some scanners have a dark calibration strip, in< [plustek] ># general this one should be used for calibration.< [plustek] ># As this could cause some trouble, this option< [plustek] ># overrides that and the dark calibration will be< [plustek] ># done by switching the lamp off< [plustek] >#< [plustek] >option skipDarkStrip 0< [plustek] Decoding option >skipDarkStrip< [plustek] >< [plustek] ># for replacing the gain values found during coarse< [plustek] ># calibration< [plustek] ># (can also be set via frontend)< [plustek] >option red_gain -1< [plustek] Decoding option >red_gain< [plustek] >option green_gain -1< [plustek] Decoding option >green_gain< [plustek] >option blue_gain -1< [plustek] Decoding option >blue_gain< [plustek] >< [plustek] ># for replacing the offset values found during coarse< [plustek] ># calibration< [plustek] ># (can also be set via frontend)< [plustek] >option red_offset -1< [plustek] Decoding option >red_offset< [plustek] >option green_offset -1< [plustek] Decoding option >green_offset< [plustek] >option blue_offset -1< [plustek] Decoding option >blue_offset< [plustek] >< [plustek] >#< [plustek] ># for replacing the default lampoff settings, this< [plustek] ># works only for CIS devices like CanoScan LiDE20< [plustek] ># (can also be set via frontend)< [plustek] >option red_lampoff -1< [plustek] Decoding option >red_lampoff< [plustek] >option green_lampoff -1< [plustek] Decoding option >green_lampoff< [plustek] >option blue_lampoff -1< [plustek] Decoding option >blue_lampoff< [plustek] >< [plustek] >#< [plustek] ># for adjusting the default gamma values< [plustek] ># (can also be set via frontend)< [plustek] >option redGamma 1.0< [plustek] Decoding option >redGamma< [plustek] >option greenGamma 1.0< [plustek] Decoding option >greenGamma< [plustek] >option blueGamma 1.0< [plustek] Decoding option >blueGamma< [plustek] >option grayGamma 1.0< [plustek] Decoding option >grayGamma< [plustek] >< [plustek] >#< [plustek] ># to enable TPA (EPSON or UMAX, if autodetection fails)< [plustek] ># 0 means default behaviour as specified in the internal tables< [plustek] ># 1 means enable (needed for UMAX 3450)< [plustek] >option enableTPA 0< [plustek] Decoding option >enableTPA< [plustek] >< [plustek] >#< [plustek] ># model override functionality, currently only available for< [plustek] ># Mustek devices, using NSCs' vendor ID: 0x0400 and< [plustek] ># also their product ID: 0x1000 (LM9831) 0x1001 (LM9832)< [plustek] >#< [plustek] ># mov/PID | 0x1000 | 0x1001< [plustek] ># ---------------------------------------< [plustek] ># 0 (default)| BearPaw1200 | BearPaw 2400< [plustek] ># 1 | ignored | BearPaw 1200< [plustek] >#< [plustek] >option mov 0< [plustek] Decoding option >mov< [plustek] >< [plustek] >#< [plustek] ># and of course the device-name< [plustek] >#< [plustek] ># device /dev/usbscanner< [plustek] >device auto< [plustek] Decoding device name >auto< [plustek] >< [plustek] >#< [plustek] ># to define a new device, start with a new section:< [plustek] ># [usb]< [plustek] >#< [plustek] attach (auto, 0xbfb1e858, (nil)) [plustek] Device configuration: [plustek] device name : >auto< [plustek] USB-ID : >< [plustek] model ovr. : 0 [plustek] warmup : -1s [plustek] lampOff : 300 [plustek] lampOffOnEnd : yes [plustek] cacheCalData : no [plustek] altCalibrate : no [plustek] skipCalibr. : no [plustek] skipFine : no [plustek] skipFineWhite: no [plustek] skipDarkStrip: no [plustek] incDarkTarget: yes [plustek] invertNegs. : no [plustek] dis.Speedup : no [plustek] pos_x : 0 [plustek] pos_y : 0 [plustek] pos_shading_y: -1 [plustek] neg_x : 0 [plustek] neg_y : 0 [plustek] neg_shading_y: -1 [plustek] tpa_x : 0 [plustek] tpa_y : 0 [plustek] tpa_shading_y: -1 [plustek] red gain : -1 [plustek] green gain : -1 [plustek] blue gain : -1 [plustek] red offset : -1 [plustek] green offset : -1 [plustek] blue offset : -1 [plustek] red lampoff : -1 [plustek] green lampoff: -1 [plustek] blue lampoff : -1 [plustek] red Gamma : 1.00 [plustek] green Gamma : 1.00 [plustek] blue Gamma : 1.00 [plustek] gray Gamma : 1.00 [plustek] --------------------- [plustek] usbDev_open(auto,) - 0x9412b60 [plustek] Vendor ID=0x03F0, Product ID=0x0605 [plustek] usbio_DetectLM983x [plustek] usbio_DetectLM983x: found LM9832/3 [plustek] * setting device to idle state! [plustek] Detected vendor & product ID: 0x03F0-0x0605 [plustek] Device description for >0x03F0-0x0605< found. [plustek] usb_initDev(31,0x03f0,-1) [plustek] Device WAF : 0x00004000 [plustek] Transferrate: 1000000 Bytes/s [plustek] Device Flags: 0x00000000 [plustek] Vendor adjusted to: >Hewlett-Packard< [plustek] LAMP-STATUS: 0x00000000 (off) [plustek] RESETTING REGISTERS(-1) - 0x80 [plustek] SETTING THE MISC I/Os [plustek] MISC I/O after RESET: 0xcc, 0xbc, 0xbb [plustek] Calibration file-names set to: [plustek] >/home/ajitk/.sane/Hewlett_Packard_Scanjet_2200c-coarse.cal< [plustek] >/home/ajitk/.sane/Hewlett_Packard_Scanjet_2200c-fine.cal< [plustek] usb_SetScanParameters() [plustek] * HDPI: 4.000 [plustek] * XDPI=150, HDPI=4.000 [plustek] * YDPI=150, MinDPIY=150 [plustek] * DataPixelStart=140, LineEnd=140 [plustek] >> End-Start=0, HDPI=4.00 [plustek] * Full Steps to Skip at Start = 0x0000 [plustek] * StepSize(Preset) = 198 (0x00c6) [plustek] * Scan calculations... [plustek] * LineLength=5389, LineRateColor=1 [plustek] * Stepsize = 337, 0x46=0x01 0x47=0x51 [plustek] * DPD =2753 (0x0ac1) [plustek] * DPD =2636 (0x0a4c), step size=337, steps2rev=30 [plustek] * llen=5389, lineRateColor=1, qtcnt=8, hfcnt=8 [plustek] usb_GetMCLKDivider() [plustek] usb_GetMCLKDiv() [plustek] - lower mclkdiv limit=2.500000 [plustek] - upper mclkdiv limit=32.500000 [plustek] - hdpi = 4.000 [plustek] - pixelbits = 8 [plustek] - pixelsperline = 0 [plustek] - linelen = 5389 [plustek] - transferrate = 1000000 [plustek] - MCLK Divider = 0 [plustek] - Current MCLK Divider = 2 [plustek] * Integration Time Adjust = 0 (HDPI=4.000,MCLKD=4.000) [plustek] * Setting GreenPWMDutyCycleLow [plustek] * Current MCLK Divider = 4.000000 [plustek] * MOTOR-Settings: PWM=0x08, PWM_DUTY=0x3c [plustek] * FFStepSize = 198, [0x48] = 0x00, [0x49] = 0xc6 [plustek] * PhyBytes = 2 [plustek] * PhyLines = 2 [plustek] * TotalBytes = 4 [plustek] * PL=295, coeffsize=216, scaler=1 [plustek] * PauseLimit = 2, [0x4e] = 0x01, [0x4f] = 0x01 [plustek] * Scansteps=28 (7*600/150) [plustek] usb_SetScanParameters() done. [plustek] MotorDPI=600, MaxMotorSpeed=1.050, FFStepSize=396 [plustek] MOTOR: PWM=0x08, PWM_DUTY=0x3c 0x45=0x13 0x48=0x01, 0x49=0x8c [plustek] MCLK_FFW = 6 --> 0x0a [plustek] >>>> CURRENT MCLK_DIV = 6 [plustek] >>>> MCH = 1 [plustek] >>>> FFS = 396 [plustek] >>>> HIGH-SPEED = 1.052 (2.200) [plustek] >>>> MIN_FFS = 189 (51.000) [plustek] usbDev_getCaps() [plustek] Scanner information: [plustek] Vendor : Hewlett-Packard [plustek] Model : Scanjet 2200c [plustek] Flags : 0x00000000 [plustek] drvclose() [plustek] usbDev_stopScan() [plustek] usbDev_ScanEnd(), start=0, park=0 [plustek] usbDev_close() [plustek] attach: model = >Scanjet 2200c< [plustek] sane_open - [plustek] Presetting Gamma tables (len=4096) [plustek] * Channel[0], gamma 1.000 [plustek] * Channel[1], gamma 1.000 [plustek] * Channel[2], gamma 1.000 [plustek] * Channel[3], gamma 1.000 [plustek] ---------------------------------- [plustek] Scanner NOT idle: 0x02 [plustek] sane_start [plustek] usbDev_open(libusb:003:006,) - (nil) [plustek] Vendor ID=0x03F0, Product ID=0x0605 [plustek] usbio_DetectLM983x [plustek] usbio_DetectLM983x: found LM9832/3 [plustek] * setting device to idle state! [plustek] Detected vendor & product ID: 0x03F0-0x0605 [plustek] Device description for >0x03F0-0x0605< found. [plustek] usb_initDev(31,0x03f0,31) [plustek] Device WAF : 0x00004000 [plustek] Transferrate: 1000000 Bytes/s [plustek] Device Flags: 0x00000006 [plustek] Vendor adjusted to: >Hewlett-Packard< [plustek] LAMP-STATUS: 0x00000000 (off) [plustek] RESETTING REGISTERS(31) - 0x80 [plustek] USING MISC I/O settings [plustek] MISC I/O after RESET: 0xcc, 0xbc, 0xbb [plustek] usbDev_getCaps() [plustek] scanmode = 3 [plustek] usbDev_getCropInfo() [plustek] usb_GetImageInfo() [plustek] Area: cx=1216, cy=900 [plustek] PPL = 202 [plustek] LPA = 150 [plustek] BPL = 606 [plustek] brightness 0, contrast 0 [plustek] usbDev_setScanEnv() [plustek] usb_SaveImageInfo() [plustek] * dwFlag = 0x00000400 [plustek] usb_GetImageInfo() [plustek] Area: cx=1216, cy=900 [plustek] * Preview Mode NOT set! [plustek] Setting map[0] at 0x0942d608 [plustek] Setting map[1] at 0x09431608 [plustek] Setting map[2] at 0x09435608 [plustek] usbDev_startScan() [plustek] * HDPI: 12.000 [plustek] * XDPI=50, HDPI=12.000 [plustek] * YDPI=150, MinDPIY=150 [plustek] LAMP-STATUS: 0x00000000 (off) [plustek] Switching Lamp on [plustek] Warmup-Timer started [plustek] LAMP-STATUS: 0x00000001 (on) [plustek] Lamp-Timer stopped [plustek] dwflag = 0x40000400 dwBytesLine = 606 [plustek] Lines = 150 [plustek] Bytes per Line = 606 [plustek] Bitdepth = 8 [plustek] TIME START [plustek] local_sane_start done [plustek] reader_process started (as thread) [plustek] sane_start done [plustek] reader_process:starting to READ data (90900 bytes) [plustek] buf = 0x09439c70 [plustek] usbDev_PrepareScan() [plustek] MotorDPI=600, MaxMotorSpeed=1.050, FFStepSize=396 [plustek] MOTOR: PWM=0x08, PWM_DUTY=0x3c 0x45=0x13 0x48=0x01, 0x49=0x8c [plustek] MCLK_FFW = 6 --> 0x0a [plustek] >>>> CURRENT MCLK_DIV = 6 [plustek] >>>> MCH = 1 [plustek] >>>> FFS = 396 [plustek] >>>> HIGH-SPEED = 1.052 (2.200) [plustek] >>>> MIN_FFS = 189 (51.000) [plustek] usb_DoCalibration() [plustek] ...goto shading position [plustek] ShadingOriginY=40 [plustek] Scanner not ready!!! [plustek] Sensor-position NOT reached [plustek] calibration failed!!! [plustek] reader_process: read failed, status = -9004, errno 11 [plustek] IPC: Transferrate = 1000000 Bytes/s [plustek] sane_read - read 0 bytes [plustek] drvclose() [plustek] TIME END 1: 16s [plustek] usbDev_stopScan() [plustek] usbDev_ScanEnd(), start=1, park=1 [plustek] >>>> CURRENT MCLK_DIV = 6 [plustek] >>>> MCH = 1 [plustek] >>>> FFS = 396 [plustek] >>>> HIGH-SPEED = 1.052 (2.200) [plustek] >>>> MIN_FFS = 189 (51.000) [plustek] Lamp-Timer started (using ITIMER) [plustek] usbDev_close() [plustek] close_pipe (r_pipe) scanimage: sane_read: Operation was cancelled [plustek] sane_cancel [plustek] do_cancel [plustek] >>>>>>>> killing reader_process <<<<<<<< [plustek] reader_process killed [plustek] TIME END 2: 16s [plustek] sane_close [plustek] sane_exit [plustek] Shutdown called (dev->fd=-1, libusb:003:006) [plustek] Waiting for scanner-ready... [plustek] Scanner not ready!!! [plustek] Switching lamp off... [plustek] LAMP-STATUS: 0x00000001 (on) [plustek] Switching Lamp off [plustek] LAMP-STATUS: 0x00000000 (off) [plustek] Lamp-Timer stopped