[sanei_debug] Setting debug level of pixma to 3.
[pixma] pixma is compiled without pthread support.
[pixma] pixma version 0.16.2
[pixma] pixma_collect_devices() found Canon PIXMA MX870 at libusb:002:008
[pixma] sanei_bjnp_find_devices:
[pixma] wlan0 is IPv4 capable, sending broadcast..
[pixma] wlan0 is IPv4 capable, sending broadcast..
[pixma] wlan0 is IPv4 capable, sending broadcast..
[pixma] wlan0 is IPv4 capable, sending broadcast..
[pixma] wlan0 is IPv4 capable, sending broadcast..
[pixma] Found scanner at ip address: 192.168.2.150
[pixma] udp_command: no data received (recv): Connection refused[pixma] udp_command: no data received (recv): Connection refused[pixma] udp_command: no data received (recv): Connection refused[pixma] Scanner not added: Cannot read scanner make & model: bjnp://localhost:8612
[pixma] Found scanner at ip address: 192.168.2.150
[pixma] Scanner at bjnp://localhost:8612 detected, but it was added before, good!
[pixma] Found scanner at ip address: 192.168.2.150
[pixma] Scanner at bjnp://localhost:8612 detected, but it was added before, good!
[pixma] Found scanner at ip address: 192.168.2.150
[pixma] Scanner at bjnp://localhost:8612 detected, but it was added before, good!
[pixma] Found scanner at ip address: 192.168.2.150
[pixma] Scanner at bjnp://localhost:8612 detected, but it was added before, good!
[pixma] pixma_find_scanners() found 1 devices
[pixma] pixma_collect_devices() found Canon PIXMA MX870 at libusb:002:008
[pixma] sanei_bjnp_find_devices:
[pixma] wlan0 is IPv4 capable, sending broadcast..
[pixma] wlan0 is IPv4 capable, sending broadcast..
[pixma] wlan0 is IPv4 capable, sending broadcast..
[pixma] wlan0 is IPv4 capable, sending broadcast..
[pixma] wlan0 is IPv4 capable, sending broadcast..
[pixma] Found scanner at ip address: 192.168.2.150
[pixma] udp_command: no data received (recv): Connection refused[pixma] udp_command: no data received (recv): Connection refused[pixma] udp_command: no data received (recv): Connection refused[pixma] Scanner not added: Cannot read scanner make & model: bjnp://localhost:8612
[pixma] Found scanner at ip address: 192.168.2.150
[pixma] Scanner at bjnp://localhost:8612 detected, but it was added before, good!
[pixma] Found scanner at ip address: 192.168.2.150
[pixma] Scanner at bjnp://localhost:8612 detected, but it was added before, good!
[pixma] Found scanner at ip address: 192.168.2.150
[pixma] Scanner at bjnp://localhost:8612 detected, but it was added before, good!
[pixma] Found scanner at ip address: 192.168.2.150
[pixma] Scanner at bjnp://localhost:8612 detected, but it was added before, good!
[pixma] pixma_open(): Canon PIXMA MX870
[pixma] Reader task id=3518 (forked)
scanimage: scanning image of size 638x877 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1914 bytes...	[pixma] Reader task started
[pixma] 
[pixma] pixma_scan(): start
[pixma]   line_size=1914 image_size=1678578 channels=3 depth=8
[pixma]   dpi=75x75 offset=(0,0) dimension=638x877
[pixma]   gamma_table=0x22fdee8 source=0
[pixma] pixma_read_image() failed EEOF
[pixma] read_image():reader task closed the pipe:0 bytes received, 1678578 bytes expected
[pixma] Reader task terminated: EEOF
[pixma] BUG: unmapped error -14
FAIL Error: Error during device I/O
[pixma] pixma_close(): Canon PIXMA MX870