Hello, at first I have to thank you for reading my problem and give me direction ^^<div><br></div><div>Double the width works, I can get both side in one image at  the same time.</div><div><br></div><div>But there is one another question . When I set the image to gray-scale image (pgm)  by "scanimage -x 212 -y 120 --format=pnm > output.pgm"</div>

<div><br></div><div>Things goes very well. But if I set the image to color image(ppm) by "scanimage --mode Color -x 212 -y 120 --format=pnm > output.ppm"</div><div><br></div><div>There seems to be some noises on the image. There are serveral yellow lines on the front-side image of my name card, and the back-side is a good one.</div>

<div><br></div><div>I've also changed "-y 120" to "-y 90" range to "-y 140", and it didn't work.</div><div><br></div><div>Belows are my output image on dropbox .</div><div><br></div>
<div>Could you kindly tell me how to make the image good? Thank you ><</div><div><br></div><div>Gray</div><div><a href="http://dl.dropbox.com/u/50343039/output.pgm">http://dl.dropbox.com/u/50343039/output.pgm</a></div>
<div><br></div><div>Color</div><div><a href="http://dl.dropbox.com/u/50343039/output.ppm">http://dl.dropbox.com/u/50343039/output.ppm</a></div><div><br></div><div>B.R</div><div><div class="gmail_quote">2011/11/15 Stef <span dir="ltr"><<a href="mailto:stef.dev@free.fr" target="_blank">stef.dev@free.fr</a>></span><br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Le lundi 14 novembre 2011 07:17:23 m. allan noah a écrit :<br>
<div>> According to our support page:<br>
><br>
> <a href="http://www.sane-project.org/cgi-bin/driver.pl?manu=syscan&model=685&bus=any&" target="_blank">http://www.sane-project.org/cgi-bin/driver.pl?manu=syscan&model=685&bus=any&</a><br>
> v=&p=<br>
><br>
> the backend does not fully support duplex:<br>
><br>
> "front- and backside side-by-side, with backside mirrored horizontally."<br>
><br>
> Have you tried making your requested image wider?<br>
><br>
> allan<br>
><br>
<br>
</div>        Hello,<br>
<br>
        I confirm that the genesys backend doesn't handle duplex. The two sensors<br>
are used as a single wide sensor. When using full scan area width (which is<br>
about the double of the width of A4), you 'll get front picture on the left<br>
side, while the back's one will be on the right top down. So you'll have to<br>
cut the scanned picture in two and filp one of the parts.<br>
<br>
Regards,<br>
<font color="#888888">        Stef<br>
</font></blockquote></div><br></div>