<div dir="ltr"><div><div>Hello,<br></div>My friend has Canon i-Sensy MF4870dn. He want to share scanner with his networks. Printer works good. But it doesn't  work <u>scan</u> on networks. Outputs here:<br><div class=""><br></div><pre style="margin:0px;padding:0px"><code class=""><b>cat /etc/sane.d/net.conf</b><br># This is the net backend config file.<br><br>## net backend options<br># Timeout for the initial connection to saned. This will prevent the backend<br># from blocking for several minutes trying to connect to an unresponsive<br># saned host (network outage, host down, ...). Value in seconds.<br># connect_timeout = 60<br><br>## saned hosts<br># Each line names a host to attach to.<br># If you list "localhost" then your backends can be accessed either<br># directly or through the net backend.  Going through the net backend<br># may be necessary to access devices that need special privileges.<br>10.60.0.17<br></code></pre><div class=""><br></div><pre style="margin:0px;padding:0px"><code class=""><b>cat /etc/default/saned</b><br># Defaults for the saned initscript, from sane-utils<br><br># Set to yes to start saned<br>RUN=yes<br><br># Set to the user saned should run as<br>RUN_AS_USER=saned<br></code></pre><div class=""><br></div><pre style="margin:0px;padding:0px"><code class=""><b>cat /etc/sane.d/saned.conf</b><br># saned.conf<br># Configuration for the saned daemon<br><br>## Daemon options<br># Port range for the data connection. Choose a range inside [1024 - 65535].<br># Avoid specifying too large a range, for performance reasons.<br>#<br># ONLY use this if your saned server is sitting behind a firewall. If your<br># firewall is a Linux machine, we strongly recommend using the<br># Netfilter nf_conntrack_sane connection tracking module instead.<br>#<br># data_portrange = 10000 - 10100<br><br><br>## Access list<br><a href="http://10.60.0.0/24">10.60.0.0/24</a><br># A list of host names, IP addresses or IP subnets (CIDR notation) that<br># are permitted to use local SANE devices. IPv6 addresses must be enclosed<br># in brackets, and should always be specified in their compressed form.<br>#<br># The hostname matching is not case-sensitive.<br><br>#scan-client.somedomain.firm<br>#192.168.0.1<br>#<a href="http://192.168.0.1/29">192.168.0.1/29</a><br>#[2001:db8:185e::42:12]<br>#[2001:db8:185e::42:12]/64<br><br># NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and<br># /etc/services must also be properly configured to start<br># the saned daemon as documented in saned(8), services(4)<br># and inetd.conf(4) (or xinetd.conf(5)).<br></code></pre><div class=""><br></div><pre style="margin:0px;padding:0px"><code class=""><b>cat /etc/sane.d/pixma.conf</b><br># pixma.conf configuration for the sane pixma backend<br>#<br># define URI's of scanners (one per line)<br># This is only used for network scanners.<br># normally scanners will be detected by sending a broadcast<br># if this does not work under your OS, or if the scanners<br># are on a different subnet, configure your scanners URI here<br>#<br># method must be bjnp<br># port number can normally be left out, port 8612 is used as default<br># Example:<br> bjnp://<a href="http://10.60.0.17">10.60.0.17</a><br># bjnp://<a href="http://printer-1.pheasant.org">printer-1.pheasant.org</a></code></pre><div class=""><br></div><pre style="margin:0px;padding:0px"><code class=""><b>scanimage -L</b><br>[bjnp] udp_command: ERROR - no data received<br>[bjnp] bjnp_init_device_structure: Cannot read mac address, skipping this scanner<br>[bjnp] udp_command: ERROR - no data received<br>[bjnp] add_scanner: ERROR - Cannot read scanner make & model: bjnp://<a href="http://10.60.0.17">10.60.0.17</a><br>Parçalama arızası</code></pre><div class=""><br></div><pre style="margin:0px;padding:0px"><code class=""><b>lsusb</b><br>Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub<br>Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub<br>Bus 001 Device 004: ID 04f2:b32f Chicony Electronics Co., Ltd <br>Bus 001 Device 003: ID 0489:e036 Foxconn / Hon Hai <br>Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub<br>Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub<br>Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub<br>Bus 003 Device 002: ID 09da:054f A4 Tech Co., Ltd <br>Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub<br></code></pre><br></div>Note: Sorry. My English is bad.<br><div><br></div></div>