<html>
  <head>

    <meta http-equiv="content-type" content="text/html; charset=utf-8">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    Hi All,<br>
    <br>
    I am trying to get my Canon i-sensys MF8350cdn scanner working over
    my network, but without luck so far. I have also a HP officejet
    connect to the network and that is picked up well.<br>
    I get the following output when I run scanimage -L in the debugging
    mode.<br>
    <br>
    <font color="#3333ff">~ $ env SANE_DEBUG_BJNP="5" scanimage -L<br>
      [sanei_debug] Setting debug level of bjnp to 5.<br>
      [bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.26<br>
      [bjnp] sanei_bjnp_find_devices: Adding scanner from pixma.conf:
      mfnp://192.168.1.154<br>
      [bjnp] bjnp_allocate_device(mfnp://192.168.1.154) 0<br>
      [bjnp] get_scanner_name: Forward lookup for Canon385e6f.Workgroup
      succeeded, using as hostname<br>
      [bjnp] setup_udp_socket: Setting up a UDP socket, dest:
      192.168.1.154  port 8610<br>
      [bjnp] udp_command: ERROR - select failed: timed out<br>
      [bjnp] udp_command: ERROR - select failed: timed out<br>
      [bjnp] udp_command: ERROR - select failed: timed out<br>
      [bjnp] udp_command: ERROR - no data received<br>
      [bjnp] bjnp_init_device_structure: Cannot read mac address,
      skipping this scanner<br>
      [bjnp] bjnp_allocate_device: Scanner not yet in our list, added
      it: 192.168.1.154:8610<br>
      [bjnp] get_scanner_id: Get scanner identity<br>
      [bjnp]  00000000:4d 46 4e 50 02 30 00 00  00 01 00 00 00 00 00 00
      <br>
      [bjnp] setup_udp_socket: Setting up a UDP socket, dest:
      192.168.1.154  port 8610<br>
      [bjnp] udp_command: ERROR - select failed: timed out<br>
      [bjnp] udp_command: ERROR - select failed: timed out<br>
      [bjnp] udp_command: ERROR - select failed: timed out<br>
      [bjnp] udp_command: ERROR - no data received<br>
      [bjnp] get_scanner_id: ERROR - Failed to retrieve scanner
      identity:<br>
      [bjnp] add_scanner: ERROR - Cannot read scanner make & model:
      mfnp://192.168.1.154<br>
      [bjnp] sanei_bjnp_find_devices: Added all configured scanners, now
      do auto detection...<br>
      [bjnp] prepare_socket: lo is not a valid IPv4 interface,
      skipping...<br>
      [bjnp] prepare_socket: eth0 is IPv4 capable, sending broadcast,
      socket = 3<br>
      [bjnp] prepare_socket: lo is not a valid IPv6 interface,
      skipping...<br>
      [bjnp] prepare_socket: eth0 is IPv6 capable, sending broadcast,
      socket = 4<br>
      [bjnp] sanei_find_devices: scanner discovery finished...<br>
      device
      `<a class="moz-txt-link-freetext" href="net:localhost:hpaio:/net/Photosmart_3300_series?zc=HP952A54">net:localhost:hpaio:/net/Photosmart_3300_series?zc=HP952A54</a>' is a
      Hewlett-Packard Photosmart_3300_series all-in-one<br>
      device `hpaio:/net/Photosmart_3300_series?zc=HP952A54' is a
      Hewlett-Packard Photosmart_3300_series all-in-one</font><br>
    <br>
    Does any one have an idea what could be the issue?<br>
    <br>
    Cheers,<br>
    WillyN2<br>
  </body>
</html>