<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<br>
<tt>Hi all,<br>
<br>
as suggested by pavlushka on irc, I am posting my problem to this
list.<br>
I am using a Xerox Workcentre 3220 MFP. I have the issue that the
scanning<br>
area is broken for all resolutions >150dpi. To be exact, only
resolution<br>
150 and 1200 works. When using 300dpi, for example,<br>
about 20% of the page is cut at the top. It looks like the page is
shifted<br>
up. The same amount (of course) then stays white at the bottom of
the page.<br>
<br>
I am using git snapshot ppa:<br>
scanimage (sane-backends) 1.0.26git; backend version 1.0.26<br>
<br>
OS: Kubuntu trusty.<br>
<br>
Scanner details (output from "scanimage -A -d "xerox_mfp:tcp
print1"):<br>
<br>
All options specific to device `xerox_mfp:tcp print1':<br>
Standard:<br>
--resolution 75|100|150|200|300|600|1200dpi [150]<br>
Sets the resolution of the scanned image.<br>
--mode Lineart|Halftone|Gray|Color [Color]<br>
Selects the scan mode (e.g., lineart, monochrome, or
color).<br>
--highlight 30..70% (in steps of 10) [inactive]<br>
Select minimum-brightness to get a white point<br>
--source Flatbed|ADF|Auto [Flatbed]<br>
Selects the scan source (such as a document-feeder).<br>
Geometry:<br>
-l 0..215.9mm (in steps of 1) [0]<br>
Top-left x position of scan area.<br>
-t 0..297.18mm (in steps of 1) [0]<br>
Top-left y position of scan area.<br>
-x 0..215.9mm (in steps of 1) [215.9]<br>
Width of scan-area.<br>
-y 0..297.18mm (in steps of 1) [297.18]<br>
Height of scan-area<br>
<br>
Regarding the support page the support for Workcentre 3220 should
be "good".<br>
Though, not being able to use 200 and 300dpi is not so good ;-)<br>
<br>
Any idea how to get around this issue? Any customizable
parameters?<br>
<br>
Thanks a lot for any help!<br>
<br>
Cheers,<br>
Matt<br>
<br>
<br>
</tt>
</body>
</html>