[cmor-tables] 54/83: 2010-11-15 : fixed typo in cfSite longitude/latitude had wrong min/max
Alastair McKinstry
mckinstry at moszumanska.debian.org
Sun Aug 30 08:06:12 UTC 2015
This is an automated email from the git hooks/post-receive script.
mckinstry pushed a commit to branch master
in repository cmor-tables.
commit 5d565374abc0c3091726bfd139ef6ac0f3aaaba5
Author: Charles Doutriaux <doutriaux1 at llnl.gov>
Date: Mon Nov 15 08:55:47 2010 -0800
2010-11-15 : fixed typo in cfSite longitude/latitude had wrong min/max
---
RELEASE-NOTES | 1 +
Tables/CMIP5_cfSites | 10 +++++-----
Tables/md5s | 2 +-
Tables_csv/cfSites.csv | 4 ++--
configure | 18 +++++++++---------
configure.ac | 2 +-
6 files changed, 19 insertions(+), 18 deletions(-)
diff --git a/RELEASE-NOTES b/RELEASE-NOTES
index ba97399..3edd1e4 100644
--- a/RELEASE-NOTES
+++ b/RELEASE-NOTES
@@ -1,3 +1,4 @@
+2010-11-15 : fixed typo in cfSite longitude/latitude had wrong min/max
2010-11-12 : added site longitude latitude to cfSite, added must_call_cmor_grid attribute, need CMOR 2.5
2010-10-25 : Fixed cfSites still had some lat/lon...
2010-10-22 : Table replaced cell_measures with ext_cell_measures to be CF compliant
diff --git a/Tables/CMIP5_cfSites b/Tables/CMIP5_cfSites
index c40d57c..c2a301d 100644
--- a/Tables/CMIP5_cfSites
+++ b/Tables/CMIP5_cfSites
@@ -11,7 +11,7 @@ frequency: subhr
cmor_version: 2.5.0 ! minimum version of CMOR that can read this table
cf_version: 1.4 ! version of CF that output conforms to
project_id: CMIP5 ! project id
-table_date: 12 November 2010 ! date this table was constructed
+table_date: 15 November 2010 ! date this table was constructed
missing_value: 1.e20 ! value used to indicate a missing value
! in arrays output by netCDF as 32-bit IEEE
@@ -2328,7 +2328,6 @@ modeling_realm: atmos
!----------------------------------
standard_name: longitude
units: degrees_east
-cell_methods: 0.0
long_name: Longitude
comment: Note that the CF convention and CMOR2 require that this field will be included in each file that contains a variable that is a function of the ""site"" dimension, so there is no need to save this field by itself. It is included here simply to indicate that longitudes should be stored for the site grid in each file written.
!----------------------------------
@@ -2337,7 +2336,8 @@ comment: Note that the CF convention and CMOR2 require that this field
dimensions: site
out_name: lon
type: real
-valid_min: 360.0
+valid_min: 0.0
+valid_max: 360.0
!----------------------------------
!
@@ -2350,7 +2350,6 @@ modeling_realm: atmos
!----------------------------------
standard_name: latitude
units: degrees_north
-cell_methods: -90.0
long_name: Latitude
comment: the above comment also applies to latitude.
!----------------------------------
@@ -2359,7 +2358,8 @@ comment: the above comment also applies to latitude.
dimensions: site
out_name: lat
type: real
-valid_min: 90.0
+valid_min: -90.0
+valid_max: 90.0
!----------------------------------
!
diff --git a/Tables/md5s b/Tables/md5s
index ad356ee..c2bd564 100644
--- a/Tables/md5s
+++ b/Tables/md5s
@@ -1 +1 @@
-{'CMIP5': {'cf3hr': {'11 May 2010': 'a59ca1270ff3036d417a7f2217598266', '19 October 2010': '8b5c2f197b70a103393838ebd4075c6c', '12 May 2010': '905f7ccdd5a31cb71e2a6e3b339cd0e1', '23 August 2010': '5ccea11a7c3d165c76df3d9eede395d0', '01 June 2010': '619aa3c816bc25a53335589698e64968', '01 July 2010': 'c0fe9e92115d75292f5009e13761cb4b', '11 November 2010': '35a8e11c7f57f3128517d21d177a8204', '12 March 2010': 'ae9a82f01824d9012aa0657cd7896a9a', '22 March 2010': '712cd14ab6a28116da828ff555e00 [...]
\ No newline at end of file
+{'CMIP5': {'cf3hr': {'11 May 2010': 'a59ca1270ff3036d417a7f2217598266', '19 October 2010': '8b5c2f197b70a103393838ebd4075c6c', '12 May 2010': '905f7ccdd5a31cb71e2a6e3b339cd0e1', '23 August 2010': '5ccea11a7c3d165c76df3d9eede395d0', '01 June 2010': '619aa3c816bc25a53335589698e64968', '01 July 2010': 'c0fe9e92115d75292f5009e13761cb4b', '29 April 2010': 'fdc4fb38dd4cfb7f066329ed43a9e805', '12 March 2010': 'ae9a82f01824d9012aa0657cd7896a9a', '22 March 2010': '712cd14ab6a28116da828ff555e00c4d [...]
\ No newline at end of file
diff --git a/Tables_csv/cfSites.csv b/Tables_csv/cfSites.csv
index bea64b9..8c35acd 100644
--- a/Tables_csv/cfSites.csv
+++ b/Tables_csv/cfSites.csv
@@ -49,7 +49,7 @@ priority,long name,units ,comment ,questions,output variable name ,standard name
1.0,Eddy Diffusivity Coefficient for Temperature Variable,m2 s-1,,,edt,atmosphere_heat_diffusivity,,m2 s-1,time: point,,,,,,real,alevel site time1,edt,atmos,,,,
1.0,Pressure on Model Levels,Pa,"This field is needed only for models in which the pressure can't be calculated from the vertical coordinate information stored already for each variable. Thus, the pressures are needed for height or theta-coordinate models, for example, but not sigma- or eta-coordinate models.",,pfull,air_pressure,,Pa,time: point,,,,,,real,alevel site time1,pfull,atmos,,,,
1.0,Pressure on Model Half-Levels,Pa,"This field is needed only for models in which the pressure can't be calculated from the vertical coordinate information stored already for each variable. Thus, the pressures are needed for height or theta-coordinate models, for example, but not sigma- or eta-coordinate models.",,phalf,air_pressure,,Pa,time: point,,,,,,real,alevel site time1,phalf,atmos,,,,
-1.0,Longitude,degrees_east,"Note that the CF convention and CMOR2 require that this field will be included in each file that contains a variable that is a function of the ""site"" dimension, so there is no need to save this field by itself. It is included here simply to indicate that longitudes should be stored for the site grid in each file written.",,lon,longitude,,degrees_east,0.0,360.0,,,,,real,site,longitude,atmos,,,,
-1.0,Latitude,degrees_north,the above comment also applies to latitude.,,lat,latitude,,degrees_north,-90.0,90.0,,,,,real,site,latitude,atmos,,,,
+1.0,Longitude,degrees_east,"Note that the CF convention and CMOR2 require that this field will be included in each file that contains a variable that is a function of the ""site"" dimension, so there is no need to save this field by itself. It is included here simply to indicate that longitudes should be stored for the site grid in each file written.",,lon,longitude,,degrees_east,,0.0,360.0,,,,real,site,longitude,atmos,,,,
+1.0,Latitude,degrees_north,the above comment also applies to latitude.,,lat,latitude,,degrees_north,,-90.0,90.0,,,,real,site,latitude,atmos,,,,
diff --git a/configure b/configure
index da25586..82b12e0 100755
--- a/configure
+++ b/configure
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for cmip5-cmor-tables 1.3.0.
+# Generated by GNU Autoconf 2.61 for cmip5-cmor-tables 1.3.1.
#
# Report bugs to <doutriaux1 at llnl.gov>.
#
@@ -574,8 +574,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
# Identity of this package.
PACKAGE_NAME='cmip5-cmor-tables'
PACKAGE_TARNAME='cmip5-cmor-tables'
-PACKAGE_VERSION='1.3.0'
-PACKAGE_STRING='cmip5-cmor-tables 1.3.0'
+PACKAGE_VERSION='1.3.1'
+PACKAGE_STRING='cmip5-cmor-tables 1.3.1'
PACKAGE_BUGREPORT='doutriaux1 at llnl.gov'
ac_default_prefix=/usr/local
@@ -1136,7 +1136,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures cmip5-cmor-tables 1.3.0 to adapt to many kinds of systems.
+\`configure' configures cmip5-cmor-tables 1.3.1 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1202,7 +1202,7 @@ fi
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of cmip5-cmor-tables 1.3.0:";;
+ short | recursive ) echo "Configuration of cmip5-cmor-tables 1.3.1:";;
esac
cat <<\_ACEOF
@@ -1267,7 +1267,7 @@ fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-cmip5-cmor-tables configure 1.3.0
+cmip5-cmor-tables configure 1.3.1
generated by GNU Autoconf 2.61
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1281,7 +1281,7 @@ cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by cmip5-cmor-tables $as_me 1.3.0, which was
+It was created by cmip5-cmor-tables $as_me 1.3.1, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ $0 $@
@@ -2227,7 +2227,7 @@ exec 6>&1
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by cmip5-cmor-tables $as_me 1.3.0, which was
+This file was extended by cmip5-cmor-tables $as_me 1.3.1, which was
generated by GNU Autoconf 2.61. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -2270,7 +2270,7 @@ Report bugs to <bug-autoconf at gnu.org>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-cmip5-cmor-tables config.status 1.3.0
+cmip5-cmor-tables config.status 1.3.1
configured by $0, generated by GNU Autoconf 2.61,
with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
diff --git a/configure.ac b/configure.ac
index fe4ff35..ad70e97 100644
--- a/configure.ac
+++ b/configure.ac
@@ -2,7 +2,7 @@ dnl -*- Autoconf -*-
dnl Process this file with autoconf to produce a configure script.
dnl AC_PREREQ(2.59)
-AC_INIT(cmip5-cmor-tables, 1.3.0, doutriaux1 at llnl.gov)
+AC_INIT(cmip5-cmor-tables, 1.3.1, doutriaux1 at llnl.gov)
GIT_TAG=`./get_git_version.sh`
--
Alioth's /usr/local/bin/git-commit-notice on /srv/git.debian.org/git/debian-science/packages/cmor-tables.git
More information about the debian-science-commits
mailing list