[nut-Patches][313197] Add 3-phase support to netvision mib (snmp-ups)

[nut-patches at alioth.debian.org]

Patches item #313197, was opened at 2011-06-30 15:37 by Manuel Bouyer
You can respond by visiting: 
https://alioth.debian.org/tracker/?func=detail&atid=411544&aid=313197&group_id=30602

Status: Open
Priority: 3
Submitted By: Manuel Bouyer (bouyer-guest)
Assigned to: Nobody (None)
Summary: Add 3-phase support to netvision mib (snmp-ups) 
Category: None
Group: None
Resolution: None


Initial Comment:
Hello,
the attached patch adds 3-phase support to the netvision mib (and adds a few other data).
This is based on the latest MIB available from the socomec web site.
Tested with a MASTERYS 3/3 SYSTEM 60 kVA UPS with a Net Vision v5.05 SNMP card:
input.frequency: 50.00
input.L1-N.voltage: 242.00   
input.L1.current: 23.00
input.L2-N.voltage: 241.00   
input.L2.current: 23.00
input.L3-N.voltage: 241.00   
input.L3.current: 23.00
input.phases: 3.00
output.frequency: 50.00
output.L1-N.voltage: 230.00  
output.L1.current: 19.20
output.L1.power.percent: 25.00
output.L2-N.voltage: 230.00  
output.L2.current: 22.90
output.L2.power.percent: 29.00
output.L3-N.voltage: 230.00  
output.L3.current: 30.50
output.L3.power.percent: 40.00
output.phases: 3.00


----------------------------------------------------------------------

You can respond by visiting: 
https://alioth.debian.org/tracker/?func=detail&atid=411544&aid=313197&group_id=30602