[Nut-upsdev] [HCL] StarPower PCF-800va supported by richcomm_usb

[Don]

Greets...

..just bought a cheap UPS today, works in debian 7.0 wrt nut 2.6.4 using
richcomm_usb driver...

....output of upsc.....

////

root at debian7:~# upsc starpower at localhost
device.mfr: Richcomm dry-contact to USB solution
device.model: UPS USB MON V1.4
device.serial: unknown
device.type: ups
driver.name: richcomm_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.6.4
driver.version.internal: 0.04
ups.mfr: Richcomm dry-contact to USB solution
ups.model: UPS USB MON V1.4
ups.productid: 1234
ups.serial: unknown
ups.status: OL
ups.vendorid: 0925

////

....shutdown test....works -- signal of low battery received from UPS,
system shutdown cleanly, no apparent issues here...

NB: rudimentary support only..ie; no additional information displayed from
UPS in nutmon, just online/on_battery/low battery -> shutdown

Unit was purchased in .AU -- there are several models of different
capacity. They are sold under the 'StarPower' branding, but manufactured by
Sako ... see;

http://www.sako.com.cn/products01.asp?Id=29&proid=53

Configuration of nut was straightforward, no surprises ;)

Thank you all for your efforts with nut -- it is appreciated!!

Cheers!

Don
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20130619/20d344fe/attachment.html>