[Pcsclite-cvs-commit] r1872 - trunk/Drivers/ccid/readers
Ludovic Rousseau
rousseau at costa.debian.org
Tue Feb 21 23:01:32 UTC 2006
Author: rousseau
Date: 2006-02-21 23:01:31 +0000 (Tue, 21 Feb 2006)
New Revision: 1872
Added:
trunk/Drivers/ccid/readers/ActivCardV2.txt
trunk/Drivers/ccid/readers/ActivCardV3.txt
Log:
add ActivCard v2 and v3 descriptions
Added: trunk/Drivers/ccid/readers/ActivCardV2.txt
===================================================================
--- trunk/Drivers/ccid/readers/ActivCardV2.txt 2006-02-21 22:50:04 UTC (rev 1871)
+++ trunk/Drivers/ccid/readers/ActivCardV2.txt 2006-02-21 23:01:31 UTC (rev 1872)
@@ -0,0 +1,53 @@
+ idVendor: 0x09C3
+ iManufacturer: ActivCard
+ idProduct: 0x0008
+ iProduct: ActivCard USB Reader V2
+ bcdDevice: 2.02 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 1
+ UNSUPPORTED SubClass
+ bInterfaceProtocol: 1
+ UNSUPPORTED InterfaceProtocol
+ iInterface: 4
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.00
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x01
+ 5.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 4.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request
+ dwDataRate: 9600 bps
+ dwMaxDataRate: 115200 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request
+ dwMaxIFSD: 252
+ dwSynchProtocols: 0x00000000
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x000100BA
+ ....02 Automatic parameter configuration based on ATR data
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....80 Automatic PPS made by the CCID
+ 01.... TPDU level exchange
+ dwMaxCCIDMessageLength: 263 bytes
+ bClassGetResponse: 0xFF
+ echoes the APDU class
+ bClassEnveloppe: 0xFF
+ echoes the APDU class
+ wLcdLayout: 0x0000
+ bPINSupport: 0x00
+ bMaxCCIDBusySlots: 1
Added: trunk/Drivers/ccid/readers/ActivCardV3.txt
===================================================================
--- trunk/Drivers/ccid/readers/ActivCardV3.txt 2006-02-21 22:50:04 UTC (rev 1871)
+++ trunk/Drivers/ccid/readers/ActivCardV3.txt 2006-02-21 23:01:31 UTC (rev 1872)
@@ -0,0 +1,51 @@
+ idVendor: 0x09C3
+ iManufacturer: ActivCard
+ idProduct: 0x0013
+ iProduct: ActivCard USB Reader V3
+ bcdDevice: 5.18 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ iInterface: 4
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.00
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x01
+ 5.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 12.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request
+ dwDataRate: 9600 bps
+ dwMaxDataRate: 307200 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request
+ dwMaxIFSD: 252
+ dwSynchProtocols: 0x00000000
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x000100BA
+ ....02 Automatic parameter configuration based on ATR data
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....80 Automatic PPS made by the CCID
+ 01.... TPDU level exchange
+ dwMaxCCIDMessageLength: 263 bytes
+ bClassGetResponse: 0xFF
+ echoes the APDU class
+ bClassEnveloppe: 0xFF
+ echoes the APDU class
+ wLcdLayout: 0x0000
+ bPINSupport: 0x00
+ bMaxCCIDBusySlots: 1
More information about the Pcsclite-cvs-commit
mailing list