[Pcsclite-cvs-commit] r2237 - trunk/Drivers/ccid/readers
Ludovic Rousseau
rousseau at alioth.debian.org
Thu Nov 23 20:58:13 CET 2006
Author: rousseau
Date: 2006-11-23 20:58:13 +0100 (Thu, 23 Nov 2006)
New Revision: 2237
Added:
trunk/Drivers/ccid/readers/C3PO_KBR36.txt
trunk/Drivers/ccid/readers/C3PO_LTC32_USBv2.txt
trunk/Drivers/ccid/readers/C3PO_LTC32_USBv2_old.txt
trunk/Drivers/ccid/readers/C3PO_TLTC2USB.txt
Modified:
trunk/Drivers/ccid/readers/Makefile.am
Log:
add C3PO_* files
Added: trunk/Drivers/ccid/readers/C3PO_KBR36.txt
===================================================================
--- trunk/Drivers/ccid/readers/C3PO_KBR36.txt 2006-11-23 09:38:26 UTC (rev 2236)
+++ trunk/Drivers/ccid/readers/C3PO_KBR36.txt 2006-11-23 19:58:13 UTC (rev 2237)
@@ -0,0 +1,54 @@
+ idVendor: 0x0783
+ iManufacturer: C3PO
+ idProduct: 0x0009
+ iProduct: USB SMART CARD KEYBOARD
+ bcdDevice: 0.13 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 2
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ iInterface: 0
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.00
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x01
+ 5.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 20.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request
+ dwDataRate: 9600 bps
+ dwMaxDataRate: 230400 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request
+ dwMaxIFSD: 254
+ dwSynchProtocols: 0x00000007
+ 2-wire protocol
+ 3-wire protocol
+ I2C protocol
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x000100BA
+ ....02 Automatic parameter configuration based on ATR data
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....80 Automatic PPS made by the CCID
+ 01.... TPDU level exchange
+ dwMaxCCIDMessageLength: 271 bytes
+ bClassGetResponse: 0x00
+ bClassEnveloppe: 0x00
+ wLcdLayout: 0x0000
+ bPINSupport: 0x03
+ PIN Verification supported
+ PIN Modification supported
+ bMaxCCIDBusySlots: 1
Added: trunk/Drivers/ccid/readers/C3PO_LTC32_USBv2.txt
===================================================================
--- trunk/Drivers/ccid/readers/C3PO_LTC32_USBv2.txt 2006-11-23 09:38:26 UTC (rev 2236)
+++ trunk/Drivers/ccid/readers/C3PO_LTC32_USBv2.txt 2006-11-23 19:58:13 UTC (rev 2237)
@@ -0,0 +1,54 @@
+ idVendor: 0x0783
+ iManufacturer: C3PO
+ idProduct: 0x0010
+ iProduct: USB SMART CARD READER
+ bcdDevice: 0.10 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 1
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ iInterface: 0
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.00
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x01
+ 5.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 20.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request
+ dwDataRate: 9600 bps
+ dwMaxDataRate: 230400 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request
+ dwMaxIFSD: 254
+ dwSynchProtocols: 0x00000007
+ 2-wire protocol
+ 3-wire protocol
+ I2C protocol
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x000100BA
+ ....02 Automatic parameter configuration based on ATR data
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....80 Automatic PPS made by the CCID
+ 01.... TPDU level exchange
+ dwMaxCCIDMessageLength: 271 bytes
+ bClassGetResponse: 0x00
+ bClassEnveloppe: 0x00
+ wLcdLayout: 0x0000
+ bPINSupport: 0x03
+ PIN Verification supported
+ PIN Modification supported
+ bMaxCCIDBusySlots: 1
Added: trunk/Drivers/ccid/readers/C3PO_LTC32_USBv2_old.txt
===================================================================
--- trunk/Drivers/ccid/readers/C3PO_LTC32_USBv2_old.txt 2006-11-23 09:38:26 UTC (rev 2236)
+++ trunk/Drivers/ccid/readers/C3PO_LTC32_USBv2_old.txt 2006-11-23 19:58:13 UTC (rev 2237)
@@ -0,0 +1,50 @@
+ idVendor: 0x0783
+ iManufacturer: C3PO
+ idProduct: 0x0007
+ iProduct: USB SMART CARD KEYBOARD
+ bcdDevice: 0.08 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 1
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ iInterface: 0
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.00
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x01
+ 5.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 20.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request
+ dwDataRate: 9600 bps
+ dwMaxDataRate: 230400 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request
+ dwMaxIFSD: 254
+ dwSynchProtocols: 0x00000001
+ 2-wire protocol
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x000100BA
+ ....02 Automatic parameter configuration based on ATR data
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....80 Automatic PPS made by the CCID
+ 01.... TPDU level exchange
+ dwMaxCCIDMessageLength: 271 bytes
+ bClassGetResponse: 0x00
+ bClassEnveloppe: 0x00
+ wLcdLayout: 0x0000
+ bPINSupport: 0x00
+ bMaxCCIDBusySlots: 1
Added: trunk/Drivers/ccid/readers/C3PO_TLTC2USB.txt
===================================================================
--- trunk/Drivers/ccid/readers/C3PO_TLTC2USB.txt 2006-11-23 09:38:26 UTC (rev 2236)
+++ trunk/Drivers/ccid/readers/C3PO_TLTC2USB.txt 2006-11-23 19:58:13 UTC (rev 2237)
@@ -0,0 +1,50 @@
+ idVendor: 0x0783
+ iManufacturer: C3PO
+ idProduct: 0x0007
+ iProduct: USB SMART CARD KEYBOARD
+ bcdDevice: 0.08 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 1
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+ iInterface: 0
+ CCID Class Descriptor
+ bLength: 0x36
+ bDescriptorType: 0x21
+ bcdCCID: 1.00
+ bMaxSlotIndex: 0x00
+ bVoltageSupport: 0x01
+ 5.0V
+ dwProtocols: 0x0000 0x0003
+ T=0
+ T=1
+ dwDefaultClock: 4.000 MHz
+ dwMaximumClock: 20.000 MHz
+ bNumClockSupported: 0 (will use whatever is returned)
+ IFD does not support GET CLOCK FREQUENCIES request
+ dwDataRate: 9600 bps
+ dwMaxDataRate: 230400 bps
+ bNumDataRatesSupported: 0 (will use whatever is returned)
+ IFD does not support GET_DATA_RATES request
+ dwMaxIFSD: 254
+ dwSynchProtocols: 0x00000001
+ 2-wire protocol
+ dwMechanical: 0x00000000
+ No special characteristics
+ dwFeatures: 0x000100BA
+ ....02 Automatic parameter configuration based on ATR data
+ ....08 Automatic ICC voltage selection
+ ....10 Automatic ICC clock frequency change according to parameters
+ ....20 Automatic baud rate change according to frequency and Fi, Di params
+ ....80 Automatic PPS made by the CCID
+ 01.... TPDU level exchange
+ dwMaxCCIDMessageLength: 271 bytes
+ bClassGetResponse: 0x00
+ bClassEnveloppe: 0x00
+ wLcdLayout: 0x0000
+ bPINSupport: 0x00
+ bMaxCCIDBusySlots: 1
Modified: trunk/Drivers/ccid/readers/Makefile.am
===================================================================
--- trunk/Drivers/ccid/readers/Makefile.am 2006-11-23 09:38:26 UTC (rev 2236)
+++ trunk/Drivers/ccid/readers/Makefile.am 2006-11-23 19:58:13 UTC (rev 2237)
@@ -7,6 +7,10 @@
ASEDrive_IIIe_KB.txt \
ASE_IIIe.txt \
AxaltoV3.txt \
+ C3PO_KBR36.txt \
+ C3PO_LTC32_USBv2.txt \
+ C3PO_LTC32_USBv_old.txt \
+ C3PO_TLTC2USB.txt \
CardMan3021.txt \
CardMan3121.txt \
CardMan3621.txt \
More information about the Pcsclite-cvs-commit
mailing list