[Pcsclite-cvs-commit] r3201 - /trunk/Drivers/ccid/readers/SDI010.txt

[rousseau at users.alioth.debian.org]

Author: rousseau
Date: Tue Nov 11 08:46:01 2008
New Revision: 3201

URL: http://svn.debian.org/wsvn/pcsclite/?sc=1&rev=3201
Log:
new firmware

Modified:
    trunk/Drivers/ccid/readers/SDI010.txt

Modified: trunk/Drivers/ccid/readers/SDI010.txt
URL: http://svn.debian.org/wsvn/pcsclite/trunk/Drivers/ccid/readers/SDI010.txt?rev=3201&op=diff
==============================================================================
--- trunk/Drivers/ccid/readers/SDI010.txt (original)
+++ trunk/Drivers/ccid/readers/SDI010.txt Tue Nov 11 08:46:01 2008
@@ -1,54 +1,55 @@
-Trying to open USB bus/device: 003/003
  idVendor: 0x04E6
   iManufacturer: SCM Microsystems Inc.
  idProduct: 0x5121
   iProduct: SDI010 Smart Card Reader
- bcdDevice: 6.32 (firmware release?)
+ bcdDevice: 7.27 (firmware release?)
  bLength: 9
  bDescriptorType: 4
  bInterfaceNumber: 0
  bAlternateSetting: 0
  bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
  bInterfaceClass: 0xFF
   NOT A CCID DEVICE
   Class is 0xFF (proprietary)
  bInterfaceSubClass: 0
  bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
  iInterface: 4
  CCID Class Descriptor
- bLength: 0x36
- bDescriptorType: 0x21
- bcdCCID: 1.00
- bMaxSlotIndex: 0x01
- bVoltageSupport: 0x01
-  5.0V
- dwProtocols: 0x0000 0x0003
-  T=0
-  T=1
- dwDefaultClock: 4.000 MHz
- dwMaximumClock: 12.000 MHz
- bNumClockSupported: 0 (will use whatever is returned)
-  IFD does not support GET CLOCK FREQUENCIES request
- dwDataRate: 10753 bps
- dwMaxDataRate: 344105 bps
- bNumDataRatesSupported: 0 (will use whatever is returned)
-  IFD does not support GET_DATA_RATES request
- dwMaxIFSD: 252
- dwSynchProtocols: 0x00000000
- dwMechanical: 0x00000000
-  No special characteristics
- dwFeatures: 0x000100BA
-  ....02 Automatic parameter configuration based on ATR data
-  ....08 Automatic ICC voltage selection
-  ....10 Automatic ICC clock frequency change according to parameters
-  ....20 Automatic baud rate change according to frequency and Fi, Di params
-  ....80 Automatic PPS made by the CCID
-  01.... TPDU level exchange
- dwMaxCCIDMessageLength: 263 bytes
- bClassGetResponse: 0xFF
-  echoes the APDU class
- bClassEnveloppe: 0xFF
-  echoes the APDU class
- wLcdLayout: 0x0000
- bPINSupport: 0x00
- bMaxCCIDBusySlots: 1
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x01
+  bVoltageSupport: 0x01
+   5.0V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.000 MHz
+  dwMaximumClock: 8.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: Broken pipe
+  dwDataRate: 10753 bps
+  dwMaxDataRate: 344105 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   IFD does not support GET_DATA_RATES request: Broken pipe
+  dwMaxIFSD: 252
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000100BA
+   ....02 Automatic parameter configuration based on ATR data
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnveloppe: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1