[Pcsclite-cvs-commit] r6961 - trunk/Drivers/ccid/readers website

[ludovic.rousseau at free.fr]

Author: rousseau
Date: 2014-08-25 19:19:03 +0000 (Mon, 25 Aug 2014)
New Revision: 6961

Added:
   trunk/Drivers/ccid/readers/Yubico_Yubikey_NEO_OTP+U2F+CCID.txt
Modified:
   trunk/Drivers/ccid/readers/supported_readers.txt
   website/shouldwork.ini
Log:
Add Yubico Yubikey NEO OTP+U2F+CCID


Added: trunk/Drivers/ccid/readers/Yubico_Yubikey_NEO_OTP+U2F+CCID.txt
===================================================================
--- trunk/Drivers/ccid/readers/Yubico_Yubikey_NEO_OTP+U2F+CCID.txt	                        (rev 0)
+++ trunk/Drivers/ccid/readers/Yubico_Yubikey_NEO_OTP+U2F+CCID.txt	2014-08-25 19:19:03 UTC (rev 6961)
@@ -0,0 +1,56 @@
+ idVendor: 0x1050
+  iManufacturer: Yubico
+ idProduct: 0x0116
+  iProduct: Yubikey NEO OTP+U2F+CCID
+ bcdDevice: 3.30 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 2
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ Can't get iInterface string
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.00
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0002
+   T=1
+  dwDefaultClock: 4.000 MHz
+  dwMaximumClock: 4.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: Resource temporarily unavailable
+  dwDataRate: 307200 bps
+  dwMaxDataRate: 307200 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   IFD does not support GET_DATA_RATES request: Resource temporarily unavailable
+  dwMaxIFSD: 1400
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000400FE
+   ....02 Automatic parameter configuration based on ATR data
+   ....04 Automatic activation of ICC on inserting
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....40 Automatic parameters negotiation made by the CCID
+   ....80 Automatic PPS made by the CCID
+   04.... Short and Extended APDU level exchange
+  dwMaxCCIDMessageLength: 1400 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnvelope: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1

Modified: trunk/Drivers/ccid/readers/supported_readers.txt
===================================================================
--- trunk/Drivers/ccid/readers/supported_readers.txt	2014-08-25 19:17:37 UTC (rev 6960)
+++ trunk/Drivers/ccid/readers/supported_readers.txt	2014-08-25 19:19:03 UTC (rev 6961)
@@ -484,6 +484,7 @@
 0x1050:0x0111:Yubico Yubikey NEO OTP+CCID
 0x1050:0x0112:Yubico Yubikey NEO CCID
 0x1050:0x0115:Yubico Yubikey NEO U2F+CCID
+0x1050:0x0116:Yubico Yubikey NEO OTP+U2F+CCID
 
 ##########################
 # section: unsupported

Modified: website/shouldwork.ini
===================================================================
--- website/shouldwork.ini	2014-08-25 19:17:37 UTC (rev 6960)
+++ website/shouldwork.ini	2014-08-25 19:19:03 UTC (rev 6961)
@@ -655,3 +655,6 @@
 [Yubico_Yubikey_NEO_U2F+CCID.txt]
 image = yubikey_neo.png
 url = http://www.yubico.com/products/yubikey-hardware/yubikey-neo/
+[Yubico_Yubikey_NEO_OTP+U2F+CCID.txt]
+image = yubikey_neo.png
+url = http://www.yubico.com/products/yubikey-hardware/yubikey-neo/