[Pcsclite-cvs-commit] r6857 - trunk/Drivers/ccid/readers website

[ludovic.rousseau at free.fr]

Author: rousseau
Date: 2014-02-18 19:25:23 +0000 (Tue, 18 Feb 2014)
New Revision: 6857

Added:
   trunk/Drivers/ccid/readers/Microchip_SEC1210.txt
Modified:
   trunk/Drivers/ccid/readers/supported_readers.txt
   website/shouldwork.ini
Log:
Add Microchip SEC1210


Added: trunk/Drivers/ccid/readers/Microchip_SEC1210.txt
===================================================================
--- trunk/Drivers/ccid/readers/Microchip_SEC1210.txt	                        (rev 0)
+++ trunk/Drivers/ccid/readers/Microchip_SEC1210.txt	2014-02-18 19:25:23 UTC (rev 6857)
@@ -0,0 +1,108 @@
+ idVendor: 0x0424
+  iManufacturer: SMSC
+ idProduct: 0x1202
+  iProduct: SMSC USX101x Reader 
+ bcdDevice: 2.22 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: CCID Interface
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.800 MHz
+  dwMaximumClock: 16.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: Success
+  dwDataRate: 12903 bps
+  dwMaxDataRate: 826000 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   IFD does not support GET_DATA_RATES request: Success
+  dwMaxIFSD: 254
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000100B2
+   ....02 Automatic parameter configuration based on ATR data
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnveloppe: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1
+ idVendor: 0x0424
+  iManufacturer: SMSC
+ idProduct: 0x1202
+  iProduct: SMSC USX101x Reader 
+ bcdDevice: 2.22 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 1
+ bAlternateSetting: 0
+ bNumEndpoints: 2
+  bulk-IN and bulk-OUT
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: CCID Interface
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.800 MHz
+  dwMaximumClock: 16.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: Success
+  dwDataRate: 12903 bps
+  dwMaxDataRate: 826000 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   IFD does not support GET_DATA_RATES request: Success
+  dwMaxIFSD: 254
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000100B2
+   ....02 Automatic parameter configuration based on ATR data
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnveloppe: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1

Modified: trunk/Drivers/ccid/readers/supported_readers.txt
===================================================================
--- trunk/Drivers/ccid/readers/supported_readers.txt	2014-02-18 19:21:30 UTC (rev 6856)
+++ trunk/Drivers/ccid/readers/supported_readers.txt	2014-02-18 19:25:23 UTC (rev 6857)
@@ -307,6 +307,7 @@
 
 # Microchip
 0x0424:0x1104:Microchip SEC1110
+0x0424:0x1202:Microchip SEC1210
 
 # Morpho
 0x079B:0x0026:Morpho MSO350/MSO351 Fingerprint Sensor & SmartCard Reader
@@ -524,6 +525,9 @@
 ##########################
 # section: duplicates
 ##########################
+#0x0424:0x1202:Microchip SEC1210 (Microchip_SEC1210.txt)
+#0x0424:0x1202:Microchip SEC1210 (Microchip_SEC1210.txt_i1)
+
 #0x04E6:0x5291:SCM Microsystems Inc. SCL010 Contactless Reader (SCL010.txt)
 #0x04E6:0x5291:SCM Microsystems Inc. SCL010 Contactless Reader (SCM_SCL010.txt)
 

Modified: website/shouldwork.ini
===================================================================
--- website/shouldwork.ini	2014-02-18 19:21:30 UTC (rev 6856)
+++ website/shouldwork.ini	2014-02-18 19:25:23 UTC (rev 6857)
@@ -354,6 +354,11 @@
 iProduct = SEC1110
 url = http://www.microchip.com/wwwproducts/Devices.aspx?product=SEC1110
 image = Microchip-SEC1110.png
+[Microchip_SEC1210.txt]
+iManufacturer = Microchip
+iProduct = SEC1210
+url = http://www.microchip.com/wwwproducts/Devices.aspx?product=SEC1210
+image = Microchip-SEC1210.jpg
 [Morpho_MSO1350.txt]
 iManufacturer = Morpho
 iProduct = MSO1350 Fingerprint Sensor & SmartCard Reader