[Pcsclite-cvs-commit] r7032 - trunk/Drivers/ccid/readers website

ludovic.rousseau at free.fr ludovic.rousseau at free.fr
Fri Nov 7 09:02:36 UTC 2014


Author: rousseau
Date: 2014-11-07 09:02:36 +0000 (Fri, 07 Nov 2014)
New Revision: 7032

Added:
   trunk/Drivers/ccid/readers/AK910_ckey_0011.txt
Modified:
   trunk/Drivers/ccid/readers/supported_readers.txt
   website/shouldwork.ini
Log:
Add AK910 CKey (idProduct 0x0011)


Added: trunk/Drivers/ccid/readers/AK910_ckey_0011.txt
===================================================================
--- trunk/Drivers/ccid/readers/AK910_ckey_0011.txt	                        (rev 0)
+++ trunk/Drivers/ccid/readers/AK910_ckey_0011.txt	2014-11-07 09:02:36 UTC (rev 7032)
@@ -0,0 +1,53 @@
+ idVendor: 0x2021
+  iManufacturer: AK910
+ idProduct: 0x0011
+  iProduct: CKey
+ bcdDevice: 1.00 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: akCCID
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x02
+   3.0V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 4.000 MHz
+  dwMaximumClock: 4.000 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   IFD does not support GET CLOCK FREQUENCIES request: Broken pipe
+  dwDataRate: 10752 bps
+  dwMaxDataRate: 250000 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   IFD does not support GET_DATA_RATES request: Broken pipe
+  dwMaxIFSD: 247
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000100B6
+   ....02 Automatic parameter configuration based on ATR data
+   ....04 Automatic activation of ICC on inserting
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0xFF
+   echoes the APDU class
+  bClassEnveloppe: 0xFF
+   echoes the APDU class
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1

Modified: trunk/Drivers/ccid/readers/supported_readers.txt
===================================================================
--- trunk/Drivers/ccid/readers/supported_readers.txt	2014-11-07 09:01:32 UTC (rev 7031)
+++ trunk/Drivers/ccid/readers/supported_readers.txt	2014-11-07 09:02:36 UTC (rev 7032)
@@ -125,6 +125,7 @@
 
 # AK910
 0x2021:0x0001:AK910 CKey
+0x2021:0x0011:AK910 CKey
 0x2021:0x0101:AK910 IDONE
 
 # Akasa

Modified: website/shouldwork.ini
===================================================================
--- website/shouldwork.ini	2014-11-07 09:01:32 UTC (rev 7031)
+++ website/shouldwork.ini	2014-11-07 09:02:36 UTC (rev 7032)
@@ -30,6 +30,8 @@
 image = AK910_idone.png
 [AK910_ckey_0001.txt]
 image = AK910_ckey.png
+[AK910_ckey_0011.txt]
+image = AK910_ckey.png
 [Akasa_AK-CR-03.txt]
 iManufacturer = Akasa
 iProduct = AK-CR-03




More information about the Pcsclite-cvs-commit mailing list