Bug#721697: gnome-panel: error 4 in libclock-applet.so, gnome-panel segfault
Tijs Maas
tijsxdmaas at gmail.com
Thu Sep 5 08:20:37 UTC 2013
Package: gnome-panel
Version: 3.4.2.1-4
Followup-For: Bug #721697
I reproduced the bug,
Just click the clock at the top a lot of times (no clickjagging, just regular
use)
I guess I clicked it 20 times when it did not show up any more.
~30 minutes later gnome segfaulted, this is serious.
Here is my dmesg log for this new crash:
[114075.611361] NMI watchdog enabled, takes one hw-pmu counter.
[114075.611670] CPU1 is up
[114075.611920] Booting Node 0 Processor 2 APIC 0x1
[114075.611922] smpboot cpu 2: start_ip = 99000
[114075.622946] Calibrating delay loop (skipped) already calibrated this CPU
[114075.643392] NMI watchdog enabled, takes one hw-pmu counter.
[114075.643671] CPU2 is up
[114075.643853] Booting Node 0 Processor 3 APIC 0x3
[114075.643854] smpboot cpu 3: start_ip = 99000
[114075.654875] Calibrating delay loop (skipped) already calibrated this CPU
[114075.675310] NMI watchdog enabled, takes one hw-pmu counter.
[114075.675624] CPU3 is up
[114075.678879] ACPI: Waking up from system sleep state S3
[114075.820126] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[114075.820457] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[114075.820919] PM: early resume of devices complete after 0.983 msecs
[114075.821030] i915 0000:00:02.0: setting latency timer to 64
[114075.821038] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[114075.821048] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[114075.821065] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[114075.821079] ahci 0000:00:1f.2: setting latency timer to 64
[114075.821122] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[114075.821165] r8169 0000:04:00.0: wake-up capability disabled by ACPI
[114075.827059] sd 0:0:0:0: [sda] Starting disk
[114075.828142] sd 1:0:0:0: [sdb] Starting disk
[114075.858508] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[114076.072257] usb 1-1.2: reset high-speed USB device number 3 using ehci_hcd
[114076.146969] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[114076.147904] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[114076.147915] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[114076.147924] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[114076.148906] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[114076.148917] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[114076.148925] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[114076.149188] ata1.00: configured for UDMA/133
[114076.243096] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd
[114078.217850] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[114078.489055] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[114078.489066] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[114078.489075] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[114078.525310] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[114078.525321] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[114078.525329] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[114078.526652] ata2.00: configured for UDMA/133
[114078.558357] PM: resume of devices complete after 2738.787 msecs
[114078.558436] PM: Finishing wakeup.
[114078.558438] Restarting tasks ... done.
[114078.570354] video LNXVIDEO:00: Restoring backlight state
[114078.570650] video LNXVIDEO:01: Restoring backlight state
[114078.859494] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[114078.885228] r8169 0000:04:00.0: eth0: link down
[114078.885236] r8169 0000:04:00.0: eth0: link down
[114078.885670] ADDRCONF(NETDEV_UP): eth0: link is not ready
[114081.550161] r8169 0000:04:00.0: eth0: link up
[114081.550524] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[114092.402509] eth0: no IPv6 routers present
[115567.899547] sd 11:0:0:0: [sdd] 15529984 512-byte logical blocks: (7.95
GB/7.40 GiB)
[115567.899654] sd 11:0:0:0: [sdd] Cache data unavailable
[115567.899662] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[115567.900559] sd 11:0:0:0: [sdd] Cache data unavailable
[115567.900565] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[115567.902352] sdd: sdd1 sdd2
[115570.081088] kjournald starting. Commit interval 5 seconds
[115570.132611] EXT3-fs (sdd2): using internal journal
[115570.132615] EXT3-fs (sdd2): recovery complete
[115570.138962] EXT3-fs (sdd2): mounted filesystem with ordered data mode
[116385.478519] usb 2-1.1: new full-speed USB device number 25 using ehci_hcd
[116385.576582] usb 2-1.1: New USB device found, idVendor=0403, idProduct=6001
[116385.576592] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[116385.576599] usb 2-1.1: Product: TTL232R-3V3
[116385.576603] usb 2-1.1: Manufacturer: FTDI
[116385.576608] usb 2-1.1: SerialNumber: FTFAF0V8
[116385.578905] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected
[116385.579022] usb 2-1.1: Detected FT232RL
[116385.579029] usb 2-1.1: Number of endpoints 2
[116385.579037] usb 2-1.1: Endpoint 1 MaxPacketSize 64
[116385.579044] usb 2-1.1: Endpoint 2 MaxPacketSize 64
[116385.579050] usb 2-1.1: Setting MaxPacketSize 64
[116385.579583] usb 2-1.1: FTDI USB Serial Device converter now attached to
ttyUSB0
[116450.574552] sdd: detected capacity change from 7951351808 to 0
[116791.533714] ttyUSB0: 1 input overrun(s)
[117141.109914] usb 2-1.1: USB disconnect, device number 25
[117141.111085] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
disconnected from ttyUSB0
[117141.111134] ftdi_sio 2-1.1:1.0: device disconnected
[117145.400842] usb 2-1.1: new full-speed USB device number 26 using ehci_hcd
[117145.498917] usb 2-1.1: New USB device found, idVendor=0403, idProduct=6001
[117145.498927] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[117145.498933] usb 2-1.1: Product: TTL232R-3V3
[117145.498938] usb 2-1.1: Manufacturer: FTDI
[117145.498942] usb 2-1.1: SerialNumber: FTFAF0V8
[117145.501303] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected
[117145.501419] usb 2-1.1: Detected FT232RL
[117145.501427] usb 2-1.1: Number of endpoints 2
[117145.501435] usb 2-1.1: Endpoint 1 MaxPacketSize 64
[117145.501442] usb 2-1.1: Endpoint 2 MaxPacketSize 64
[117145.501448] usb 2-1.1: Setting MaxPacketSize 64
[117145.501859] usb 2-1.1: FTDI USB Serial Device converter now attached to
ttyUSB0
[120815.739816] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at
byte 6
[120815.759929] psmouse serio4: Touchpad at isa0060/serio4/input0 - driver
resynced.
[121112.376280] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at
byte 6
[121112.386874] psmouse serio4: Touchpad at isa0060/serio4/input0 - driver
resynced.
[122183.524585] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at
byte 6
[122183.545765] psmouse serio4: Touchpad at isa0060/serio4/input0 - driver
resynced.
[123720.071597] psmouse serio4: Touchpad at isa0060/serio4/input0 lost sync at
byte 6
[123720.082245] psmouse serio4: Touchpad at isa0060/serio4/input0 - driver
resynced.
[124312.219335] sd 11:0:0:0: [sdd] 15529984 512-byte logical blocks: (7.95
GB/7.40 GiB)
[124312.219431] sd 11:0:0:0: [sdd] Cache data unavailable
[124312.219439] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[124312.220514] sd 11:0:0:0: [sdd] Cache data unavailable
[124312.220523] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[124312.222595] sdd: sdd1 sdd2
[124312.551363] kjournald starting. Commit interval 5 seconds
[124312.621716] EXT3-fs (sdd2): using internal journal
[124312.621722] EXT3-fs (sdd2): mounted filesystem with ordered data mode
[124316.899233] usb 2-1.1: USB disconnect, device number 26
[124316.899588] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
disconnected from ttyUSB0
[124316.899629] ftdi_sio 2-1.1:1.0: device disconnected
[124748.858620] sdd: detected capacity change from 7951351808 to 0
[124778.937387] usb 2-1.1: new full-speed USB device number 27 using ehci_hcd
[124779.035723] usb 2-1.1: New USB device found, idVendor=0403, idProduct=6001
[124779.035734] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[124779.035740] usb 2-1.1: Product: TTL232R-3V3
[124779.035744] usb 2-1.1: Manufacturer: FTDI
[124779.035749] usb 2-1.1: SerialNumber: FTFAF0V8
[124779.038108] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected
[124779.038220] usb 2-1.1: Detected FT232RL
[124779.038229] usb 2-1.1: Number of endpoints 2
[124779.038236] usb 2-1.1: Endpoint 1 MaxPacketSize 64
[124779.038243] usb 2-1.1: Endpoint 2 MaxPacketSize 64
[124779.038249] usb 2-1.1: Setting MaxPacketSize 64
[124779.038666] usb 2-1.1: FTDI USB Serial Device converter now attached to
ttyUSB0
[125013.763522] ttyUSB0: 2 input overrun(s)
[125185.567469] usb 2-1.1: USB disconnect, device number 27
[125185.567828] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
disconnected from ttyUSB0
[125185.567876] ftdi_sio 2-1.1:1.0: device disconnected
[125205.968111] PM: Syncing filesystems ... done.
[125205.985530] PM: Preparing system for mem sleep
[125206.598627] Freezing user space processes ... (elapsed 0.01 seconds) done.
[125206.614062] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[125206.630076] PM: Entering mem sleep
[125206.630153] Suspending console(s) (use no_console_suspend to debug)
[125206.630439] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[125206.630573] sd 1:0:0:0: [sdb] Stopping disk
[125206.630755] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[125206.631369] sd 0:0:0:0: [sda] Stopping disk
[125207.269684] PM: suspend of devices complete after 639.758 msecs
[125207.269940] r8169 0000:04:00.0: wake-up capability enabled by ACPI
[125207.301820] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[125207.317872] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[125207.333724] PM: late suspend of devices complete after 64.056 msecs
[125207.334395] ACPI: Preparing to enter system sleep state S3
[125207.341689] PM: Saving platform NVS memory
[125207.343424] Disabling non-boot CPUs ...
[125207.445489] CPU 1 is now offline
[125207.549440] CPU 2 is now offline
[125207.653383] CPU 3 is now offline
[125207.653929] Extended CMOS year: 2000
[125207.654192] ACPI: Low-level resume complete
[125207.654243] PM: Restoring platform NVS memory
[125207.654686] Extended CMOS year: 2000
[125207.654723] Enabling non-boot CPUs ...
[125207.654904] Booting Node 0 Processor 1 APIC 0x2
[125207.654906] smpboot cpu 1: start_ip = 99000
[125207.665927] Calibrating delay loop (skipped) already calibrated this CPU
[125207.686249] NMI watchdog enabled, takes one hw-pmu counter.
[125207.686560] CPU1 is up
[125207.686742] Booting Node 0 Processor 2 APIC 0x1
[125207.686743] smpboot cpu 2: start_ip = 99000
[125207.697764] Calibrating delay loop (skipped) already calibrated this CPU
[125207.718226] NMI watchdog enabled, takes one hw-pmu counter.
[125207.718629] CPU2 is up
[125207.718922] Booting Node 0 Processor 3 APIC 0x3
[125207.718928] smpboot cpu 3: start_ip = 99000
[125207.729952] Calibrating delay loop (skipped) already calibrated this CPU
[125207.750402] NMI watchdog enabled, takes one hw-pmu counter.
[125207.750666] CPU3 is up
[125207.753924] ACPI: Waking up from system sleep state S3
[125207.899079] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[125207.899410] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[125207.899871] PM: early resume of devices complete after 0.983 msecs
[125207.899982] i915 0000:00:02.0: setting latency timer to 64
[125207.899995] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[125207.899998] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[125207.900035] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[125207.900064] ahci 0000:00:1f.2: setting latency timer to 64
[125207.900074] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[125207.900122] r8169 0000:04:00.0: wake-up capability disabled by ACPI
[125207.901168] sd 0:0:0:0: [sda] Starting disk
[125207.901209] sd 1:0:0:0: [sdb] Starting disk
[125207.937196] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[125208.150019] usb 1-1.2: reset high-speed USB device number 3 using ehci_hcd
[125208.225885] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[125208.226880] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[125208.226891] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[125208.226899] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[125208.227885] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[125208.227896] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[125208.227904] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[125208.228191] ata1.00: configured for UDMA/133
[125208.322125] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd
[125210.296816] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[125210.567697] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[125210.567709] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[125210.567717] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[125210.604102] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[125210.604113] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[125210.604121] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[125210.605427] ata2.00: configured for UDMA/133
[125210.637039] PM: resume of devices complete after 2738.516 msecs
[125210.637116] PM: Finishing wakeup.
[125210.637117] Restarting tasks ... done.
[125210.644268] video LNXVIDEO:00: Restoring backlight state
[125210.644611] video LNXVIDEO:01: Restoring backlight state
[125210.938139] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[125210.960167] r8169 0000:04:00.0: eth0: link down
[125210.960173] r8169 0000:04:00.0: eth0: link down
[125210.961149] ADDRCONF(NETDEV_UP): eth0: link is not ready
[125213.635954] r8169 0000:04:00.0: eth0: link up
[125213.636686] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[125223.893748] eth0: no IPv6 routers present
[125556.335475] usb 2-1.1: new full-speed USB device number 28 using ehci_hcd
[125556.433675] usb 2-1.1: New USB device found, idVendor=0403, idProduct=6001
[125556.433685] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[125556.433692] usb 2-1.1: Product: TTL232R-3V3
[125556.433697] usb 2-1.1: Manufacturer: FTDI
[125556.433701] usb 2-1.1: SerialNumber: FTFAF0V8
[125556.436054] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected
[125556.436096] usb 2-1.1: Detected FT232RL
[125556.436098] usb 2-1.1: Number of endpoints 2
[125556.436100] usb 2-1.1: Endpoint 1 MaxPacketSize 64
[125556.436102] usb 2-1.1: Endpoint 2 MaxPacketSize 64
[125556.436104] usb 2-1.1: Setting MaxPacketSize 64
[125556.436808] usb 2-1.1: FTDI USB Serial Device converter now attached to
ttyUSB0
[126540.455325] PM: Syncing filesystems ... done.
[126540.473622] PM: Preparing system for mem sleep
[126541.070968] Freezing user space processes ... (elapsed 0.01 seconds) done.
[126541.086293] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[126541.102218] PM: Entering mem sleep
[126541.102320] Suspending console(s) (use no_console_suspend to debug)
[126541.102641] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
disconnected from ttyUSB0
[126541.102653] ftdi_sio 2-1.1:1.0: device disconnected
[126541.102714] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[126541.102760] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[126541.102853] sd 1:0:0:0: [sdb] Stopping disk
[126541.103485] sd 0:0:0:0: [sda] Stopping disk
[126541.741957] PM: suspend of devices complete after 639.873 msecs
[126541.742196] r8169 0000:04:00.0: wake-up capability enabled by ACPI
[126541.774111] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[126541.790169] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[126541.806013] PM: late suspend of devices complete after 64.073 msecs
[126541.806685] ACPI: Preparing to enter system sleep state S3
[126541.813987] PM: Saving platform NVS memory
[126541.815381] Disabling non-boot CPUs ...
[126541.917780] CPU 1 is now offline
[126542.021732] CPU 2 is now offline
[126542.125668] CPU 3 is now offline
[126542.126260] Extended CMOS year: 2000
[126542.126523] ACPI: Low-level resume complete
[126542.126573] PM: Restoring platform NVS memory
[126542.127027] Extended CMOS year: 2000
[126542.127064] Enabling non-boot CPUs ...
[126542.127244] Booting Node 0 Processor 1 APIC 0x2
[126542.127245] smpboot cpu 1: start_ip = 99000
[126542.138266] Calibrating delay loop (skipped) already calibrated this CPU
[126542.158585] NMI watchdog enabled, takes one hw-pmu counter.
[126542.158890] CPU1 is up
[126542.159035] Booting Node 0 Processor 2 APIC 0x1
[126542.159037] smpboot cpu 2: start_ip = 99000
[126542.170060] Calibrating delay loop (skipped) already calibrated this CPU
[126542.190556] NMI watchdog enabled, takes one hw-pmu counter.
[126542.190855] CPU2 is up
[126542.191304] Booting Node 0 Processor 3 APIC 0x3
[126542.191305] smpboot cpu 3: start_ip = 99000
[126542.202329] Calibrating delay loop (skipped) already calibrated this CPU
[126542.222784] NMI watchdog enabled, takes one hw-pmu counter.
[126542.223124] CPU3 is up
[126542.226446] ACPI: Waking up from system sleep state S3
[126542.371385] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[126542.371716] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[126542.372183] PM: early resume of devices complete after 0.991 msecs
[126542.372294] i915 0000:00:02.0: setting latency timer to 64
[126542.372308] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[126542.372312] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[126542.372348] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[126542.372380] ahci 0000:00:1f.2: setting latency timer to 64
[126542.372387] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[126542.372445] r8169 0000:04:00.0: wake-up capability disabled by ACPI
[126542.373560] sd 0:0:0:0: [sda] Starting disk
[126542.378293] sd 1:0:0:0: [sdb] Starting disk
[126542.409224] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[126542.622421] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd
[126542.690173] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[126542.691155] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[126542.691169] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[126542.691172] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[126542.692082] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[126542.692093] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[126542.692101] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[126542.692383] ata1.00: configured for UDMA/133
[126542.786272] usb 1-1.2: reset high-speed USB device number 3 using ehci_hcd
[126544.881069] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[126545.156543] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[126545.156554] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[126545.156563] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[126545.193044] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[126545.193055] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[126545.193063] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[126545.194387] ata2.00: configured for UDMA/133
[126545.225915] PM: resume of devices complete after 2855.138 msecs
[126545.225947] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected
[126545.225984] usb 2-1.1: Detected FT232RL
[126545.225985] usb 2-1.1: Number of endpoints 2
[126545.225986] usb 2-1.1: Endpoint 1 MaxPacketSize 64
[126545.225987] usb 2-1.1: Endpoint 2 MaxPacketSize 64
[126545.225988] usb 2-1.1: Setting MaxPacketSize 64
[126545.226292] usb 2-1.1: FTDI USB Serial Device converter now attached to
ttyUSB1
[126545.226412] PM: Finishing wakeup.
[126545.226414] Restarting tasks ... done.
[126545.253075] video LNXVIDEO:00: Restoring backlight state
[126545.253392] video LNXVIDEO:01: Restoring backlight state
[126545.521256] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[126545.540448] r8169 0000:04:00.0: eth0: link down
[126545.540455] r8169 0000:04:00.0: eth0: link down
[126545.541529] ADDRCONF(NETDEV_UP): eth0: link is not ready
[126548.255673] r8169 0000:04:00.0: eth0: link up
[126548.256090] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[126558.985724] eth0: no IPv6 routers present
[126862.209825] usb 2-1.1: USB disconnect, device number 28
[126862.210142] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now
disconnected from ttyUSB1
[126862.210222] ftdi_sio 2-1.1:1.0: device disconnected
[126881.098509] sd 11:0:0:0: [sdd] 15529984 512-byte logical blocks: (7.95
GB/7.40 GiB)
[126881.098620] sd 11:0:0:0: [sdd] Cache data unavailable
[126881.098628] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[126881.099633] sd 11:0:0:0: [sdd] Cache data unavailable
[126881.099638] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[126881.101528] sdd: sdd1 sdd2
[126881.416814] kjournald starting. Commit interval 5 seconds
[126881.463019] EXT3-fs (sdd2): using internal journal
[126881.463026] EXT3-fs (sdd2): mounted filesystem with ordered data mode
[126933.071283] sdd: detected capacity change from 7951351808 to 0
[126978.314846] usb 2-1.1: new full-speed USB device number 29 using ehci_hcd
[126978.413013] usb 2-1.1: New USB device found, idVendor=0403, idProduct=6001
[126978.413024] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[126978.413030] usb 2-1.1: Product: TTL232R-3V3
[126978.413035] usb 2-1.1: Manufacturer: FTDI
[126978.413039] usb 2-1.1: SerialNumber: FTFAF0V8
[126978.415291] ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected
[126978.415333] usb 2-1.1: Detected FT232RL
[126978.415336] usb 2-1.1: Number of endpoints 2
[126978.415338] usb 2-1.1: Endpoint 1 MaxPacketSize 64
[126978.415340] usb 2-1.1: Endpoint 2 MaxPacketSize 64
[126978.415342] usb 2-1.1: Setting MaxPacketSize 64
[126978.415654] usb 2-1.1: FTDI USB Serial Device converter now attached to
ttyUSB0
[131941.680626] usb 2-1.1: USB disconnect, device number 29
[131941.681089] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
disconnected from ttyUSB0
[131941.681131] ftdi_sio 2-1.1:1.0: device disconnected
[132370.599716] soffice.bin[8140]: segfault at 0 ip 00007f211dea3ec7 sp
00007fff1c87d060 error 4 in libvcllo.so[7f211dce2000+7e5000]
[133915.992647] asus_wmi: Unknown key 57 pressed
[133920.494247] asus_wmi: Unknown key 58 pressed
[139824.339428] PM: Syncing filesystems ... done.
[139824.349011] PM: Preparing system for mem sleep
[139824.974161] Freezing user space processes ... (elapsed 0.01 seconds) done.
[139824.989624] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[139825.005635] PM: Entering mem sleep
[139825.005714] Suspending console(s) (use no_console_suspend to debug)
[139825.006033] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[139825.006084] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[139825.006163] sd 1:0:0:0: [sdb] Stopping disk
[139825.006609] sd 0:0:0:0: [sda] Stopping disk
[139825.649254] PM: suspend of devices complete after 643.772 msecs
[139825.649553] r8169 0000:04:00.0: wake-up capability enabled by ACPI
[139825.681376] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[139825.697428] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[139825.713279] PM: late suspend of devices complete after 64.040 msecs
[139825.713951] ACPI: Preparing to enter system sleep state S3
[139825.721249] PM: Saving platform NVS memory
[139825.722732] Disabling non-boot CPUs ...
[139825.825041] CPU 1 is now offline
[139825.929003] CPU 2 is now offline
[139826.032933] CPU 3 is now offline
[139826.033524] Extended CMOS year: 2000
[139826.033788] ACPI: Low-level resume complete
[139826.033839] PM: Restoring platform NVS memory
[139826.034285] Extended CMOS year: 2000
[139826.034323] Enabling non-boot CPUs ...
[139826.034506] Booting Node 0 Processor 1 APIC 0x2
[139826.034507] smpboot cpu 1: start_ip = 99000
[139826.045528] Calibrating delay loop (skipped) already calibrated this CPU
[139826.065842] NMI watchdog enabled, takes one hw-pmu counter.
[139826.066144] CPU1 is up
[139826.066287] Booting Node 0 Processor 2 APIC 0x1
[139826.066288] smpboot cpu 2: start_ip = 99000
[139826.077310] Calibrating delay loop (skipped) already calibrated this CPU
[139826.097756] NMI watchdog enabled, takes one hw-pmu counter.
[139826.098260] CPU2 is up
[139826.098469] Booting Node 0 Processor 3 APIC 0x3
[139826.098471] smpboot cpu 3: start_ip = 99000
[139826.109491] Calibrating delay loop (skipped) already calibrated this CPU
[139826.129940] NMI watchdog enabled, takes one hw-pmu counter.
[139826.130191] CPU3 is up
[139826.133451] ACPI: Waking up from system sleep state S3
[139826.278076] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[139826.278407] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[139826.278868] PM: early resume of devices complete after 0.980 msecs
[139826.278949] i915 0000:00:02.0: setting latency timer to 64
[139826.278957] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[139826.278987] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[139826.279035] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[139826.279090] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[139826.279117] ahci 0000:00:1f.2: setting latency timer to 64
[139826.279242] r8169 0000:04:00.0: wake-up capability disabled by ACPI
[139826.287049] sd 0:0:0:0: [sda] Starting disk
[139826.287068] sd 1:0:0:0: [sdb] Starting disk
[139826.315730] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[139826.529581] usb 1-1.2: reset high-speed USB device number 3 using ehci_hcd
[139826.605458] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[139826.606240] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[139826.606251] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[139826.606260] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[139826.607060] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[139826.607071] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[139826.607079] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[139826.607360] ata1.00: configured for UDMA/133
[139826.646313] Extended CMOS year: 2000
[139826.701558] usb 1-1.4: reset high-speed USB device number 4 using ehci_hcd
[139828.900264] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[139829.177688] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[139829.177700] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[139829.177708] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[139829.214088] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[139829.214100] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[139829.214108] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[139829.215420] ata2.00: configured for UDMA/133
[139829.235939] PM: resume of devices complete after 2958.533 msecs
[139829.236029] PM: Finishing wakeup.
[139829.236030] Restarting tasks ... done.
[139829.242935] video LNXVIDEO:00: Restoring backlight state
[139829.243205] video LNXVIDEO:01: Restoring backlight state
[139829.673325] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[139829.943398] r8169 0000:04:00.0: eth0: link down
[139829.943404] r8169 0000:04:00.0: eth0: link down
[139829.943720] ADDRCONF(NETDEV_UP): eth0: link is not ready
[139832.675419] r8169 0000:04:00.0: eth0: link up
[139832.675956] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[139843.148851] eth0: no IPv6 routers present
[147443.375512] gnome-panel[16925]: segfault at 8000000002 ip 00007fb18d847131
sp 00007fff4c5386f0 error 4 in libclock-applet.so[7fb18d825000+4b000]
-- System Information:
Debian Release: 7.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages gnome-panel depends on:
ii gconf-service 3.2.5-1+build1
ii gnome-icon-theme-symbolic 3.4.0-2
ii gnome-menus 3.4.2-5
ii gnome-panel-data 3.4.2.1-4
ii libatk1.0-0 2.4.0-2
ii libc6 2.13-38
ii libcairo-gobject2 1.12.2-3
ii libcairo2 1.12.2-3
ii libdconf0 0.12.1-3
ii libebook-1.2-13 3.4.4-3
ii libecal-1.2-11 3.4.4-3
ii libedataserver-1.2-16 3.4.4-3
ii libedataserverui-3.0-1 3.4.4-3
ii libgconf-2-4 3.2.5-1+build1
ii libgdk-pixbuf2.0-0 2.26.1-1
ii libglib2.0-0 2.33.12+really2.32.4-5
ii libgnome-desktop-3-2 3.4.2-1
ii libgnome-menu-3-0 3.4.2-5
ii libgtk-3-0 3.4.2-6
ii libgweather-3-0 3.4.1-1+build1
ii libical0 0.48-2
ii libice6 2:1.0.8-2
ii libpanel-applet-4-0 3.4.2.1-4
ii libpango1.0-0 1.30.0-1
ii librsvg2-2 2.36.1-1
ii libsm6 2:1.2.1-2
ii libsoup2.4-1 2.38.1-2
ii libtelepathy-glib0 0.18.2-2
ii libwnck-3-0 3.4.2-1
ii libx11-6 2:1.5.0-1+deb7u1
ii libxau6 1:1.0.7-1
ii libxml2 2.8.0+dfsg1-7+nmu1
ii libxrandr2 2:1.3.2-2+deb7u1
Versions of packages gnome-panel recommends:
ii alacarte 3.5.3-1
ii evolution-data-server 3.4.4-3
ii gnome-applets 3.4.1-3
ii gnome-control-center 1:3.4.3.1-2
ii gnome-icon-theme 3.4.0-2
ii gnome-session 3.4.2.1-4
ii gnome-session-fallback 3.4.2.1-4
ii gvfs 1.12.3-4
Versions of packages gnome-panel suggests:
ii gnome-terminal [x-terminal-emulator] 3.4.1.1-2
ii gnome-user-guide 3.4.2-1+build1
ii nautilus 3.4.2-1+build1
ii xterm [x-terminal-emulator] 278-4
ii yelp 3.4.2-1+b1
-- no debconf information
More information about the pkg-gnome-maintainers
mailing list