Bug#1051251: /usr/sbin/grub-mkconfig: 300: /etc/grub.d/25_bli: not found due to wrong shell location
Klaus Ethgen
Klaus at ethgen.de
Tue Sep 5 07:12:18 BST 2023
Package: grub-common
Version: 2.12~rc1-7
Severity: important
~> update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-6.1.38
Found memtest86+x64 image: /boot/memtest86+x64.bin
/usr/sbin/grub-mkconfig: 300: /etc/grub.d/25_bli: not found
The shebang line state "#!/usr/bin/sh" but there is no shell in
/usr/bin, they always are in /bin!
-- Package-specific info:
*********************** BEGIN /proc/mounts
/dev/md0 / btrfs rw,lazytime,relatime,compress=zstd:3,ssd_spread,space_cache,autodefrag,subvolid=5,subvol=/ 0 0
/dev/mapper/sysvg-lv_usr /usr btrfs rw,lazytime,nodev,noatime,compress=zstd:3,ssd,space_cache,autodefrag,subvolid=5,subvol=/ 0 0
/dev/mapper/sysvg-lv_var /var btrfs rw,lazytime,nosuid,relatime,compress-force=lzo,ssd,space_cache,autodefrag,subvolid=5,subvol=/ 0 0
/dev/mapper/crypt0 /home btrfs rw,lazytime,nosuid,nodev,noatime,compress=zstd:3,ssd,space_cache,autodefrag,subvolid=258,subvol=/home 0 0
/dev/mapper/crypt0 /misc btrfs rw,lazytime,nosuid,noatime,compress=zstd:3,ssd,space_cache,autodefrag,subvolid=257,subvol=/misc 0 0
/dev/mapper/crypt0 /etc/secure btrfs rw,lazytime,nosuid,nodev,noexec,relatime,compress=zstd:3,ssd,space_cache,autodefrag,subvolid=259,subvol=/etc 0 0
/dev/mapper/crypt0 /root btrfs rw,lazytime,nosuid,nodev,relatime,compress=zstd:3,ssd,space_cache,autodefrag,subvolid=260,subvol=/root 0 0
/dev/mapper/_sec /misc/gmail/sec btrfs rw,lazytime,nosuid,nodev,noatime,compress=zstd:3,ssd,space_cache,autodefrag,subvolid=297,subvol=/.subfolder 0 0
*********************** END /proc/mounts
*********************** BEGIN /boot/grub/grub.cfg
-- System Information:
Debian Release: trixie/sid
APT prefers experimental
APT policy: (1, 'experimental')
merged-usr: no
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 6.1.38 (SMP w/8 CPU threads)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_CPU_OUT_OF_SPEC, TAINT_FIRMWARE_WORKAROUND, TAINT_OOT_MODULE
Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages grub-common depends on:
ii gettext-base 0.21-13
ii libc6 2.37-7
ii libdevmapper1.02.1 2:1.02.185-2
ii libefiboot1 37-6
ii libefivar1 37-6
ii libfreetype6 2.13.2+dfsg-1
ii libfuse3-3 3.14.0-4
ii liblzma5 5.4.4-0.1
Versions of packages grub-common recommends:
pn os-prober <none>
Versions of packages grub-common suggests:
ii console-setup 1.222
pn desktop-base <none>
pn grub-emu <none>
ii mtools 4.0.43-1
pn multiboot-doc <none>
ii xorriso 1.5.4-4
-- Configuration Files:
/etc/grub.d/10_linux changed:
set -e
prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
ubuntu_recovery="0"
quiet_boot="0"
quick_boot="0"
gfxpayload_dynamic="0"
vt_handoff="0"
. "$pkgdatadir/grub-mkconfig_lib"
export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"
CLASS="--class gnu-linux --class gnu --class os"
if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
OS=GNU/Linux
else
case ${GRUB_DISTRIBUTOR} in
Ubuntu|Kubuntu)
OS="${GRUB_DISTRIBUTOR}"
;;
*)
OS="${GRUB_DISTRIBUTOR} GNU/Linux"
;;
esac
CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi
case ${GRUB_DEVICE} in
/dev/loop/*|/dev/loop[0-9])
GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
# We can't cope with devices loop-mounted from files here.
case ${GRUB_DEVICE} in
/dev/*) ;;
*) exit 0 ;;
esac
;;
esac
: ${GRUB_CMDLINE_LINUX_RECOVERY:=single}
: ${GRUB_DISABLE_LINUX_PARTUUID=true}
if ( [ "x${GRUB_DEVICE_UUID}" = "x" ] && [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] ) \
|| ( [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
&& [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ] ) \
|| ( ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
&& ! test -e "/dev/disk/by-partuuid/${GRUB_DEVICE_PARTUUID}" ) \
|| ( test -e "${GRUB_DEVICE}" && uses_abstraction "${GRUB_DEVICE}" lvm ); then
LINUX_ROOT_DEVICE=${GRUB_DEVICE}
elif [ "x${GRUB_DEVICE_UUID}" = "x" ] \
|| [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ]; then
LINUX_ROOT_DEVICE=PARTUUID=${GRUB_DEVICE_PARTUUID}
else
LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi
case x"$GRUB_FS" in
xbtrfs)
rootsubvol="`make_system_path_relative_to_its_root /`"
rootsubvol="${rootsubvol#/}"
if [ "x${rootsubvol}" != x ]; then
GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}"
fi;;
xzfs)
rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs%/}"
;;
esac
title_correction_code=
if [ -x /lib/recovery-mode/recovery-menu ]; then
GRUB_CMDLINE_LINUX_RECOVERY="${GRUB_CMDLINE_LINUX_RECOVERY} recovery"
else
GRUB_CMDLINE_LINUX_RECOVERY="${GRUB_CMDLINE_LINUX_RECOVERY} single"
fi
if [ "$ubuntu_recovery" = 1 ]; then
GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY nomodeset"
fi
if [ "$vt_handoff" = 1 ]; then
for word in $GRUB_CMDLINE_LINUX_DEFAULT; do
if [ "$word" = splash ]; then
GRUB_CMDLINE_LINUX_DEFAULT="$GRUB_CMDLINE_LINUX_DEFAULT \$vt_handoff"
fi
done
fi
linux_entry ()
{
os="$1"
version="$2"
type="$3"
args="$4"
users="$5"
#rootflags="compress,ssd_spread,discard"
rootflags="compress,ssd_spread"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
if [ x$type != xsimple ] ; then
case $type in
recovery)
title="$(gettext_printf "%s, with Linux %s (%s)" "${os}" "${version}" "$(gettext "${GRUB_RECOVERY_TITLE}")")"
restrict="--users ''"
;;
*)
title="$(gettext_printf "%s, with Linux %s" "${os}" "${version}")"
restrict='--unrestricted'
;;
esac
if [ x"$title" = x"$GRUB_ACTUAL_DEFAULT" ] || [ x"Previous Linux versions>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
fi
if [ -n "${users}" ]
then
restrict="--users '${users}'"
fi
echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} ${restrict} \$menuentry_id_option 'gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
else
if [ -n "${users}" ]
then
restrict="--users '${users}'"
else
restrict='--unrestricted'
fi
echo "menuentry '$(echo "$os" | grub_quote)' ${CLASS} ${restrict} \$menuentry_id_option 'gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
fi
if [ "$quick_boot" = 1 ]; then
echo " recordfail" | sed "s/^/$submenu_indentation/"
fi
if [ x$type != xrecovery ] ; then
save_default_entry | grub_add_tab
fi
# Use ELILO's generic "efifb" when it's known to be available.
# FIXME: We need an interface to select vesafb in case efifb can't be used.
if [ "x$GRUB_GFXPAYLOAD_LINUX" = x ]; then
echo " load_video" | sed "s/^/$submenu_indentation/"
else
if [ "x$GRUB_GFXPAYLOAD_LINUX" != xtext ]; then
echo " load_video" | sed "s/^/$submenu_indentation/"
fi
fi
if ([ "$ubuntu_recovery" = 0 ] || [ x$type != xrecovery ]) && \
([ "x$GRUB_GFXPAYLOAD_LINUX" != x ] || [ "$gfxpayload_dynamic" = 1 ]); then
echo " gfxmode \$linux_gfx_mode" | sed "s/^/$submenu_indentation/"
fi
echo " insmod gzio" | sed "s/^/$submenu_indentation/"
echo " if [ x\$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi" | sed "s/^/$submenu_indentation/"
if [ x$dirname = x/ ]; then
if [ -z "${prepare_root_cache}" ]; then
prepare_root_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE} | grub_add_tab)"
fi
printf '%s\n' "${prepare_root_cache}" | sed "s/^/$submenu_indentation/"
else
if [ -z "${prepare_boot_cache}" ]; then
prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
fi
printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
fi
if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
message="$(gettext_printf "Loading Linux %s ..." ${version})"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
linux ${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args}
EOF
if test -n "${initrd}" ; then
# TRANSLATORS: ramdisk isn't identifier. Should be translated.
if [ x"$quiet_boot" = x0 ] || [ x"$type" != xsimple ]; then
message="$(gettext_printf "Loading initial ramdisk ...")"
sed "s/^/$submenu_indentation/" << EOF
echo '$(echo "$message" | grub_quote)'
EOF
fi
initrd_path=
for i in ${initrd}; do
initrd_path="${initrd_path} ${rel_dirname}/${i}"
done
sed "s/^/$submenu_indentation/" << EOF
initrd $(echo $initrd_path)
EOF
fi
sed "s/^/$submenu_indentation/" << EOF
}
EOF
}
machine=`uname -m`
case "x$machine" in
xi?86 | xx86_64)
list=
for i in /boot/vmlinuz-* /vmlinuz-* /boot/kernel-* ; do
if grub_file_is_not_garbage "$i" ; then list="$list $i" ; fi
done ;;
*)
list=
for i in /boot/vmlinuz-* /boot/vmlinux-* /vmlinuz-* /vmlinux-* /boot/kernel-* ; do
if grub_file_is_not_garbage "$i" ; then list="$list $i" ; fi
done ;;
esac
case "$machine" in
i?86) GENKERNEL_ARCH="x86" ;;
mips|mips64) GENKERNEL_ARCH="mips" ;;
mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
arm*) GENKERNEL_ARCH="arm" ;;
*) GENKERNEL_ARCH="$machine" ;;
esac
case "$GENKERNEL_ARCH" in
x86*) GRUB_CMDLINE_LINUX_RECOVERY="$GRUB_CMDLINE_LINUX_RECOVERY dis_ucode_ldr";;
esac
prepare_boot_cache=
prepare_root_cache=
boot_device_id=
title_correction_code=
cat << 'EOF'
function gfxmode {
set gfxpayload="${1}"
EOF
if [ "$vt_handoff" = 1 ]; then
cat << 'EOF'
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
EOF
fi
cat << EOF
}
EOF
if [ "x$GRUB_GFXPAYLOAD_LINUX" != x ] || [ "$gfxpayload_dynamic" = 0 ]; then
echo "set linux_gfx_mode=$GRUB_GFXPAYLOAD_LINUX"
else
cat << EOF
if [ "\${recordfail}" != 1 ]; then
if [ -e \${prefix}/gfxblacklist.txt ]; then
if [ \${grub_platform} != pc ]; then
set linux_gfx_mode=keep
elif hwmatch \${prefix}/gfxblacklist.txt 3; then
if [ \${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
EOF
fi
cat << EOF
export linux_gfx_mode
EOF
submenu_indentation=""
reverse_sorted_list=$(echo $list | tr ' ' '\n' | sed -e 's/\.old$/ 1/; / 1$/! s/$/ 2/' | version_sort -r | sed -e 's/ 1$/.old/; s/ 2$//')
if [ "x$GRUB_TOP_LEVEL" != x ]; then
reverse_sorted_list=$(grub_move_to_front "$GRUB_TOP_LEVEL" ${reverse_sorted_list})
fi
is_top_level=true
for linux in ${reverse_sorted_list}; do
gettext_printf "Found linux image: %s\n" "$linux" >&2
basename=`basename $linux`
dirname=`dirname $linux`
rel_dirname=`make_system_path_relative_to_its_root $dirname`
version=`echo $basename | sed -e "s,^[^0-9]*-,,g"`
alt_version=`echo $version | sed -e "s,\.old$,,g"`
linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"
initrd_early=
for i in ${GRUB_EARLY_INITRD_LINUX_STOCK} \
${GRUB_EARLY_INITRD_LINUX_CUSTOM}; do
if test -e "${dirname}/${i}" ; then
initrd_early="${initrd_early} ${i}"
fi
done
initrd_real=
for i in "initrd.img-${version}" "initrd-${version}.img" \
"initrd-${alt_version}.img.old" "initrd-${version}.gz" \
"initrd-${alt_version}.gz.old" "initrd-${version}" \
"initramfs-${version}.img" "initramfs-${alt_version}.img.old" \
"initrd.img-${alt_version}" "initrd-${alt_version}.img" \
"initrd-${alt_version}" "initramfs-${alt_version}.img" \
"initramfs-genkernel-${version}" \
"initramfs-genkernel-${alt_version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
"initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
if test -e "${dirname}/${i}" ; then
initrd_real="${i}"
break
fi
done
initrd=
if test -n "${initrd_early}" || test -n "${initrd_real}"; then
initrd="${initrd_early} ${initrd_real}"
initrd_display=
for i in ${initrd}; do
initrd_display="${initrd_display} ${dirname}/${i}"
done
gettext_printf "Found initrd image: %s\n" "$(echo $initrd_display)" >&2
fi
config=
for i in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
if test -e "${i}" ; then
config="${i}"
break
fi
done
initramfs=
if test -n "${config}" ; then
initramfs=`grep CONFIG_INITRAMFS_SOURCE= "${config}" | cut -f2 -d= | tr -d \"`
fi
if test -z "${initramfs}" && test -z "${initrd_real}" ; then
# "UUID=" and "ZFS=" magic is parsed by initrd or initramfs. Since there's
# no initrd or builtin initramfs, it can't work here.
if [ "x${GRUB_DEVICE_PARTUUID}" = "x" ] \
|| [ "x${GRUB_DISABLE_LINUX_PARTUUID}" = "xtrue" ]; then
linux_root_device_thisversion=${GRUB_DEVICE}
else
linux_root_device_thisversion=PARTUUID=${GRUB_DEVICE_PARTUUID}
fi
fi
# The GRUB_DISABLE_SUBMENU option used to be different than others since it was
# mentioned in the documentation that has to be set to 'y' instead of 'true' to
# enable it. This caused a lot of confusion to users that set the option to 'y',
# 'yes' or 'true'. This was fixed but all of these values must be supported now.
if [ "x${GRUB_DISABLE_SUBMENU}" = xyes ] || [ "x${GRUB_DISABLE_SUBMENU}" = xy ]; then
GRUB_DISABLE_SUBMENU="true"
fi
if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xtrue ]; then
linux_entry "${OS}" "${version}" simple \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
submenu_indentation="$grub_tab"
if [ -z "$boot_device_id" ]; then
boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
fi
# TRANSLATORS: %s is replaced with an OS name
echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' --unrestricted \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
is_top_level=false
fi
linux_entry "${OS}" "${version}" advanced \
"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
linux_entry "${OS}" "${version}" recovery \
"${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}"
fi
done
if [ x"$is_top_level" != xtrue ]; then
echo '}'
fi
echo "$title_correction_code"
/etc/grub.d/25_bli changed:
set -e
cat << EOF
if [ "\$grub_platform" = "efi" ]; then
insmod bli
fi
EOF
-- no debconf information
--
Klaus Ethgen http://www.ethgen.ch/
pub 4096R/4E20AF1C 2011-05-16 Klaus Ethgen <Klaus at Ethgen.ch>
Fingerprint: 85D4 CA42 952C 949B 1753 62B3 79D0 B06F 4E20 AF1C
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 688 bytes
Desc: not available
URL: <http://alioth-lists.debian.net/pipermail/pkg-grub-devel/attachments/20230905/91ebf041/attachment-0001.sig>
More information about the Pkg-grub-devel
mailing list